| Main > Main Forum |
| What did you do for Q*Bert? |
| << < (2/4) > >> |
| telengard:
I took a joystick I had (ms one) and rotated it 45 degrees. So far works great. Way back when I had a panel with Oscar restrictor plates on it. ~telengard |
| Ummon:
--- Quote from: telengard on July 21, 2008, 09:54:51 pm ---I took a joystick I had (ms one) and rotated it 45 degrees. So far works great. Way back when I had a panel with Oscar restrictor plates on it. ~telengard --- End quote --- That's what it always was - a 4-way rotated an eighth of a turn. Alternatively, you can use the diagonals of an 8-way, but there will be dead spots, and the dead spots will be larger than the active ones. U360 is the best (and perhaps only) non-dedicated solution. |
| TheShanMan:
--- Quote from: EwJ on July 21, 2008, 08:13:26 pm --- --- Quote from: Droler on July 21, 2008, 07:56:12 pm ---If I could force MAME to only move the character if I hit down AND left, or up AND right... --- End quote --- You can do just that. Hit tab while in the game, and set the controls with the diagonals (should register both directions). --- End quote --- Yep. That's what I do and it works great. When you are setting the key mapping, just push it into a diagonal and you'll see that both keys appear, and both are required to trigger movement in that direction. |
| jdjuggler:
Does anyone know if I can do the same diagonal only restriction like the U360's on the Happ's P360? |
| Thenasty:
I added a Leaf Style Switch under my P360 (for 8-way games) and installed the Switches diagonally. I had to change the stick for that had a longer shaft. |
| Navigation |
| Message Index |
| Next page |
| Previous page |