| Main > Main Forum |
| Spinner you're using?...and your Mame Tempest settings? |
| (1/3) > >> |
| Ummon:
What spinner are you using and what do you set the sensitivity at for Tempest? I'm using a Tornado spinner and I set the sensitivity at 150. It seems to be the balance between skipping paths and being able to easily roam the board. |
| TheShanMan:
As a matter of fact, I use a tempest spinner! ;D And I haven't found any need to muck with the analog settings. The default settings seem fine to me, though I don't exactly play it all the time. |
| u_rebelscum:
From our wiki page, looks like 150% is correct for the tornado: 72 teeth original / 48 teeth tornado = 1.5 = 150% The extra notes on tempest included info you can use to verify if 150% is like the original (1 rotation of spinner = x movement in game.) |
| Ummon:
--- Quote from: u_rebelscum on July 21, 2008, 01:49:44 am ---From our wiki page, looks like 150% is correct for the tornado: 72 teeth original / 48 teeth tornado = 1.5 = 150% The extra notes on tempest included info you can use to verify if 150% is like the original (1 rotation of spinner = x movement in game.) --- End quote --- HM. I don't remember the original having such travel...but of course it might've, just didn't have the same spin time - which is why I think I might prefer the Tornado. I would like to get some time on an original though, just to check it out. |
| mrclean:
I'm using the TT2 from Groovygamegear, i use these settings : Stock settings in MAME of: Digital Dial speed- 20 Dial Reverse - Off dial sensitivity - 100% Not sure if i can improve it, I really don't play this game, more of an arkanoid person |
| Navigation |
| Message Index |
| Next page |