Main > Main Forum
Ultimarc IPAC 4 issue
(1/3) > >>
deadsoulz:
My Player 1 and Player 2 buttons work perfect every time, but sometimes the 3 and 4 buttons go weird on me and stop working properly and they only come back to there setting if I shutdown and remove power from my computer(ipac) for a second and boot back up.  Anyone seen this before?  I am using the Ps/2 version.


ahofle:
Can you elaborate on "go weird on me" and "stop working properly"?
deadsoulz:
Sure.. heheheh If you look at the ipac when this is happening (a pain because I have to take my cabinet apart)  The Green light on the second half of the ipac goes off.  And the behavior is all the buttons send multiple keyboard inputs,, which none of them are what I programmed it for.

Is that any clearer?  Its kinda hard to explain.

ahofle:
Hmm and this is only intermittent?  Or all the time?  Also you said it was only player 3 and 4 before, but are you saying it's every button?  Assuming you have ruled out faulty wiring/grounds/connections, I would definitely start with an email to Andy at ultimarc.  He is very responsive with technical support.
deadsoulz:
Yeah its all buttons on the second half of the IPAC(P3,P4 buttons), I have checked my ground many times to try and see if one is loose or something, but I can't find one, unless the 2nd ground on the ipac itself is faulty.
Navigation
Message Index
Next page

Go to full version