Main > Project Announcements
MAME Project - Round 2....Fight!
8way:
--- Quote from: Chase on July 19, 2008, 09:33:02 pm ---
--- Quote from: DaOld Man on July 19, 2008, 10:43:05 am ---I have a question too.
In the T molding pic, it looks like the slots are cut wrong to make the bend that it has ahead of it.
Maybe Im missing something here, or maybe you are not finished with the cut, but shouldnt the t-molding spline have small V shaped notches to make a bend like that?
--- End quote ---
We cut the small slots (by hand using a razor), it helped the T-Molding get around the corner without bumps or issue.
--- End quote ---
What he means is, you should cut V shaped slots for outer radius corners, and strait slots for inner radius corners.
Chase:
Update: Day 2 - 1 Hour Total
Finished the basic shell and cabinet today, added the Keyboard Drawer and some small brackets for the soon coming control panel.
Cleaned up all the fuzz from the Styrofoam and wiped it down.
Next up: Light Fixture, Speaker System, Marquee, Coin Door, Computer, TV/Monitor
GAtekwriter:
Chase,
Thanks for the responses - and MORE PICS PLEASE! Thanks, good luck, have fun.
Jim
Chase:
--- Quote from: GAtekwriter on July 21, 2008, 12:56:22 pm ---Chase,
Thanks for the responses - and MORE PICS PLEASE! Thanks, good luck, have fun.
Jim
--- End quote ---
Will do! It's good to know that someone is reading this! :)
I will post some pics from the completed shell, and don't worry, I will take more more pics! :applaud:
Chase:
Update - Day 3 - 2.5 Hours
Hey Everyone,
The day was spent getting casters and wheels into postion on the bottom of the cabinet to make it easier to move. What we did was purchased 2 Swivel Locking Casters and 2 Fixed Straight Casters.
We affixed them on the bottom of the cabinet using a custom template and a block of 2x4 to use as internal backing to add support. Below are picture of the fun!
Full Quality Pics Here: http://flickr.com/photos/allaboutchase/sets/72157605841825099/
Full Quality Pics Here: http://flickr.com/photos/allaboutchase/sets/72157605841825099/
Thanks everyone! More to come!
- Chase
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version