Main > Main Forum

What kind of LEDs do I need for the LED-Wiz/Happ translucent buttons?

Pages: << < (5/6) > >>

RandyT:


--- Quote from: DaddyLongLegs on July 23, 2008, 07:08:57 am ---Thanks arzoo.

Sidenote: I will be ordering a bunch of NovaGEMs today. If you guys at GroovyGameGear could find it in your hearts to send me a terminal screw for the LED wiz I'd appreciate it. The #1 port screw somehow is missing.

--- End quote ---

It's probably in the packaging somewhere.  Most likely rattled out during shipping.  But not a problem, just remind me in the comments section when you place the order.

RandyT

DaddyLongLegs:


--- Quote from: RandyT on July 23, 2008, 03:10:26 pm ---It's probably in the packaging somewhere.  Most likely rattled out during shipping.  But not a problem, just remind me in the comments section when you place the order.

RandyT

--- End quote ---

Thank you! I also want to order those  Pushbutton Graphic Inserts for the 1 through 4 player start buttons, and have them light up when a coin is inserted. Are they compatible with the NovaGems? If so, which color NovaGems do you recommend look the best? My guess would be clear NovaGem with a white light, but I'm not sure! What's your opinion?

RandyT:


--- Quote from: DaddyLongLegs on July 24, 2008, 01:44:37 pm ---I also want to order those  Pushbutton Graphic Inserts for the 1 through 4 player start buttons, and have them light up when a coin is inserted. Are they compatible with the NovaGems? If so, which color NovaGems do you recommend look the best? My guess would be clear NovaGem with a white light, but I'm not sure! What's your opinion?

--- End quote ---

They are compatible (pretty much designed for them)  The color is really up to you.  I would go with the clear button, and whatever color LED suits your panel.  I'm partial to blue (check out Franco's video), but white (it's a warm white like an incandescent, BTW) would be fine as well.

RandyT

DaddyLongLegs:


--- Quote from: RandyT on July 24, 2008, 02:17:13 pm ---They are compatible (pretty much designed for them)  The color is really up to you.  I would go with the clear button, and whatever color LED suits your panel.  I'm partial to blue (check out Franco's video), but white (it's a warm white like an incandescent, BTW) would be fine as well.

RandyT

--- End quote ---

Thanks but don't you see the spring through the top of the clear button?

RandyT:


--- Quote from: DaddyLongLegs on July 24, 2008, 03:47:04 pm ---Thanks but don't you see the spring through the top of the clear button?

--- End quote ---

Not with the PGI in there.  No spring visibility. :)

RandyT

Pages: << < (5/6) > >>

Go to full version