Main > Main Forum
SlikStik Overlays Now Available on Mameroom Controllers
<< < (2/7) > >>
Teknique:

--- Quote from: Havok on July 13, 2008, 07:27:39 pm ---Looks nice, but for that price you really need to ditch the trackball mounting plate.

--- End quote ---

agreed- up the price and route it out- keep the plexi and use a high lip tb to avoid pinch points.  Also might consider lipped t-molding to avoid the screw holes around the cp.

Overall though not a bad price.  Considering the controls and materials are more than half the cost of the unit.  that is if it comes with a controller... Does it come equipped with an ipac or keywiz?
Mameroom:
Thanks for the feedback and suggestions, I will look into those.  The prototype for sale has a keywiz, but our Classic controllers will have IPACs in the near future.
Minwah:

--- Quote from: Mameroom on July 13, 2008, 07:46:23 pm ---We can mount the trackball flush by routing out underneath the control panel and mounting the trackball without a plate...however, we would not be able to offer the clear plastic cover with this option as it would create "pinch-points" around the trackball.

--- End quote ---

Alternatively you could keep the plate but flush-mount it by routing the top of the panel. This way there are no pinch points (if I understood correctly what was meant by that).
Havok:
Or you could use this:

FrizzleFried:

--- Quote from: Mameroom on July 13, 2008, 08:36:17 pm ---Thanks...Current turn around time is 1 week.  The flush-mount option will be available in the next couple of weeks...but the clear plexiglas cover will not be an option on the flush mounts.

--- End quote ---

Why not?  My control panel has a plexiglass cover and flush mounted trackball?  I am a little confused as to these "pinch points"?  The plexi sits flush with the plastic trackball rim...if you cut the plexi nice it provides a nice transition from plexi to plastic rim to ball.  If you're that worried simply round the plexi slightly with a router?


EDIT: BTW,  by purchasing these "SlikStik" designs,  are folks contributing to the coffers of the person who allegedly stole money from more than one person of this community?
Navigation
Message Index
Next page
Previous page

Go to full version