Main > Main Forum
Yet another "Please critique my Control panel design"
specfire:
Any feedback would be very welcome. I am finally getting back to the hobby after about 2 years away. I have a cut-corner Dynamo Cabinet taking up space in my basement that I have decided to get rid of since I will never finish it. A stand alone control panel is far more achievable for me.
Panel dimension 10" x 22.5"
Parts:
HAPP 2.25" TBall
U360 joysticks
TT2 spinner
the spinner can go in any of the button holes across the top.
I will never play street fighter so don't need 6 buttons and I thought that 5 buttons laid out in this manner would be easier to find in frantic gameplay then if they were in a standard grid layout.
Franco B:
Is there any reason you want 5 buttons? I cant think of any games that used 5 buttons in that type of configuration.
If you are not going to be using 6 buttons I would personally use four in the neogeo layout.
BASS!:
I seccond franco, I can think of mortal combat, but its layed out in an X.
Blanka:
The spinner in any of the button holes is kindof optimistic. The mechanic is much bigger. Or the spinner must have a very long shaft to get past the button switches.
Franco B:
--- Quote from: Blanka on July 04, 2008, 04:47:30 am ---The spinner in any of the button holes is kindof optimistic. The mechanic is much bigger. Or the spinner must have a very long shaft to get past the button switches.
--- End quote ---
The GGG TT2 fits in a standard 1 1/8" button hole.