| Main > Main Forum |
| Yet another "Please critique my Control panel design" |
| (1/2) > >> |
| specfire:
Any feedback would be very welcome. I am finally getting back to the hobby after about 2 years away. I have a cut-corner Dynamo Cabinet taking up space in my basement that I have decided to get rid of since I will never finish it. A stand alone control panel is far more achievable for me. Panel dimension 10" x 22.5" Parts: HAPP 2.25" TBall U360 joysticks TT2 spinner the spinner can go in any of the button holes across the top. I will never play street fighter so don't need 6 buttons and I thought that 5 buttons laid out in this manner would be easier to find in frantic gameplay then if they were in a standard grid layout. |
| Franco B:
Is there any reason you want 5 buttons? I cant think of any games that used 5 buttons in that type of configuration. If you are not going to be using 6 buttons I would personally use four in the neogeo layout. |
| BASS!:
I seccond franco, I can think of mortal combat, but its layed out in an X. |
| Blanka:
The spinner in any of the button holes is kindof optimistic. The mechanic is much bigger. Or the spinner must have a very long shaft to get past the button switches. |
| Franco B:
--- Quote from: Blanka on July 04, 2008, 04:47:30 am ---The spinner in any of the button holes is kindof optimistic. The mechanic is much bigger. Or the spinner must have a very long shaft to get past the button switches. --- End quote --- The GGG TT2 fits in a standard 1 1/8" button hole. |
| Navigation |
| Message Index |
| Next page |