| Main > Main Forum |
| whats the best way to do this (control panel wiring) |
| (1/2) > >> |
| clickhea:
i have a minipac which iam using to wire the trackball... i also have a tt2 spinner with its own interface board. am i better off using the tt2 interface board, or putting both the trackball and spinner to the minipac? or does it not matter. |
| DeLuSioNal29:
I would go with the interface that the TT2 came with. The TT2 works at a higher resolution than a normal spinner so using another interface may not be the best thing to do. ~ DeLuSioNaL |
| clickhea:
alright thanks for the info one more question my buttons are in this kinda layout oOo oOo o would button 1 be the top left, button 2 middle top button 3 top right, button 4 lower left button 5 lower middle button 6 lower right button 7 thumb button |
| nuka1195:
this is where we made the mistake. we did the 7 button layout but placed the thumb button further away so our button layout is. 456 123 7 the bad thing is, it seems easier to reach down that up. so i think if your thumb button is close to the bottom row i would do. 123 456 7 i should have read more, but did not find this answered. |
| DeLuSioNal29:
Yes, mine is: 123 456 7 Works great for me and I also made 7456 my abcd buttons in neo geo games. ~ DeLuSioNaL |
| Navigation |
| Message Index |
| Next page |