| Main > Main Forum |
| U360 Balltop Spinning Off |
| << < (3/3) |
| surface tension:
I've never had a problem with my balls dropping off. Tightening up using a screwdriver and rubber glove should do the job. Oh god, where is this going! You don't want to be using any old loctite if you are having this problem. You need the specific 'Threadlock' which you'll find much easier if you ever want to remove! http://www.wyko.co.uk/adhesives/threadlocking.asp |
| Minwah:
--- Quote from: st on June 18, 2008, 06:25:35 am ---I've never had a problem with my balls dropping off. Tightening up using a screwdriver and rubber glove should do the job. --- End quote --- I agree...or instead of a rubber glove I used my mums rubber mat thing for unscrewing tight jam jar lids...you can get it really tight. |
| Havok:
--- Quote from: st on June 18, 2008, 06:25:35 am ---I've never had a problem with my balls dropping off. --- End quote --- And that must be a source of great relief! ;D |
| Navigation |
| Message Index |
| Previous page |