Main > Main Forum

Irresistible force vs. immovable object

Pages: << < (3/4) > >>

Bender:

if  its that tight don't twist the screwdriver use it like a prybar against the shaft
I have maybe 15 different joysticks and some do have a lot less room but I've been able to get the e clip off all of then with a small screwdriver, I don't, however, have the one you have so it may not be possible

good luck and if you can, do it inside a plastic bag cause as others have mentioned sometimes small things go flying around the room

NoOne=NBA=:

Another trick I've used is to thread a piece of wire through the gap, and then use that to pull the clip off.
I have specifically used some solid stainless wire that I had laying around.
I don't know how it would work with really thin copper wire.

ChoiceStriker:

Thanks guys!  I got it with the needle-nose pliers. 

Ginsu Victim:


--- Quote from: ChoiceStriker on June 13, 2008, 10:09:46 pm ---Thanks guys!  I got it with the needle-nose pliers. 

--- End quote ---

That's what I use.

Xiaou2:


 For super tight e-clips,  use a vice grip.
Push the actuator down to get the needed room.


Pages: << < (3/4) > >>

Go to full version