| Main > Main Forum |
| finnaly getting around to wiring up my control panel |
| (1/3) > >> |
| clickhea:
wow it seems like forever since i ordered the parts and was actually able to start using them. I purchased the minipac with harness, but it seems like the wires on the harness are all way too short to reach where i need, have any of you expierenced this problem? if i wanted to ditch the harness what kind of connect do i need to wire up my buttons to the mini pac? |
| Ginsu Victim:
Check out what I said in this thread and it might give you an idea. Scroll down for pics. http://forum.arcadecontrols.com/index.php?topic=80053.msg836238#msg836238 |
| Turnarcades:
Just buy a big roll of wire and splice in the length you need to each connection. Cut, strip, twist and wrap with insulation tape. |
| Havok:
--- Quote from: Turnarcades on June 08, 2008, 04:40:45 pm ---Just buy a big roll of wire and splice in the length you need to each connection. Cut, strip, twist and wrap with insulation tape. --- End quote --- A better way of doing it would be to cut the wire, and join with butt connectors - much better and more durable than electrical tape: http://www.crowbarelectricalparts.com/Butt_Connectors.htm |
| Jdurg:
Or solder the wires together, and cover in electrical tape. (The wet, paint-on type of tape is even better). |
| Navigation |
| Message Index |
| Next page |