Main > Main Forum

Easiest way to hook up Dreamcast to Arcade cabinet

Pages: (1/3) > >>

falcons7:

Hello I am somewhat stuck on what route to go in order to get my dreamcast running in my cps2 cabinet. I have a Wells Gardner monitor inside the cabinet. I currently purchased a naki dreamcast vga box and a vga to RGB/H/V cable.... Please help :(

abzman2000:

http://www.gamesx.com/wiki/doku.php?id=av:dreamcastav

this seems to say that the dreamcast does 15kHz stock, so I think you would have to hack that cable or something

falcons7:

I knew that part although I wanted to know once i cut the ends off of the cable that I have what do i plug the wires into?

abzman2000:

oh, well you should need the RGB ground h-sync, and v-sync lines

and jump pin 6, or 7 but not both to ground

falcons7:

i have taken pictures of what seems to be the molex connector on the back of my monitor that contains RGB/H/V. Does anyone know which wire is which, cause if seems to me that the red, green, are the first two, then it seems like a brown? grey and yellow. what is the brown one for?
 




Pages: (1/3) > >>

Go to full version