| Main > Main Forum |
| Easiest way to hook up Dreamcast to Arcade cabinet |
| (1/3) > >> |
| falcons7:
Hello I am somewhat stuck on what route to go in order to get my dreamcast running in my cps2 cabinet. I have a Wells Gardner monitor inside the cabinet. I currently purchased a naki dreamcast vga box and a vga to RGB/H/V cable.... Please help :( |
| abzman2000:
http://www.gamesx.com/wiki/doku.php?id=av:dreamcastav this seems to say that the dreamcast does 15kHz stock, so I think you would have to hack that cable or something |
| falcons7:
I knew that part although I wanted to know once i cut the ends off of the cable that I have what do i plug the wires into? |
| abzman2000:
oh, well you should need the RGB ground h-sync, and v-sync lines and jump pin 6, or 7 but not both to ground |
| falcons7:
i have taken pictures of what seems to be the molex connector on the back of my monitor that contains RGB/H/V. Does anyone know which wire is which, cause if seems to me that the red, green, are the first two, then it seems like a brown? grey and yellow. what is the brown one for? |
| Navigation |
| Message Index |
| Next page |