Main > Main Forum
Putting a bezel over a 20" TV, or making one
unit416:
I did the spray paint approach. I took a piece of plexiglass and had it cut to the right dimensions. I covered the area where the screen would be viewed and sprayed away. It turned out great! When viewed from the opposite side it is a beautiful, glossy black. I secured it using velcro at the top along the piece of MDF that supports the marquee.
Timstuff:
I'm now starting to gravitate towards the arcade builder's secret weapon (velcro) to hold my monitor glass in place. Four pieces holding the glass against the TV casing seems like it ought to do the trick.
Turnarcades:
Copied from another thread by me:
Depending on how your cabinet is assembled, the bezel can simply be bonded to the plexi at the top and bottom edges (non-visible), then the plexi bonded to the rear of the lower marquee section and a couple of wood blocks at the bottom;