Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: First pinball. cleaning the playfield. UPDATED: pictures added  (Read 16577 times)

0 Members and 1 Guest are viewing this topic.

shardian

  • Saint is the evil mastermind
  • Trade Count: (+23)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9218
  • Last login:August 21, 2015, 03:11:31 pm
  • Friends don't let friends build frankenpanels...
Re: First pinball. cleaning the playfield. UPDATED: pictures added
« Reply #40 on: June 20, 2008, 04:25:14 pm »
Get ready to have lots of fun when figuring out a good method for pulling pins too.  ;)

I used the small jewelers flat head, and ground down the sides to make it a bit thinner. Then I wrapped the handle in some fabric for padding. Those pins are a complete ---smurfette---!

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: First pinball. cleaning the playfield. UPDATED: pictures added
« Reply #41 on: November 17, 2014, 12:56:08 am »
Updating this old thread. Great Plains sells the correct removal tool # 11-03-0016 for pulling out the system 1 terminals from the connector housings:

https://www.greatplainselectronics.com/products.asp?cat=140