| Main > Main Forum |
| wiring illuminated button |
| (1/1) |
| vertygo:
Ok, I already tried with no result, so I'm going to ask here. I have a small illuminated pushbutton, the contacts on the bottom are L+ L- C NO and NC How do I wire my 5v from gpwiz to this thing ? I have one wire from the ground to the C, and one from the 5v to the L+ and then tried a few combos with no result, so I'm sucking it up and asking here :) (I'm also pretty sure it's a 5v led, not a 12v) |
| NickG:
speculation here; but the NC, NO, and C are probably just for the switch, so the light probably should be L+ and L- (maybe Light+ and Light-). so your 0 Volt reference should probably be the L- |
| vertygo:
That was it exactly.. thanks so much! |
| Navigation |
| Message Index |