| Main > Main Forum |
| U360 mounting question |
| (1/2) > >> |
| somunny:
I'm assuming that I could mount the U360's sideways and then reconfigure the inputs in the software. Is this correct? I'm trying to deal with a possible space issue. |
| nuka1195:
or just remove the base plate and turn it 90 degrees. |
| fixedpigs:
--- Quote from: nuka1195 on May 25, 2008, 08:18:08 pm ---or just remove the base plate and turn it 90 degrees. --- End quote --- indeed...just do this...super simple & effective... :cheers: |
| somunny:
Ok.. Let me preface this by saying that I don't have the sticks in hand yet (they're still on holiday with Franco ;)). The base plate and base end up being mounted perpendicular to each other. Am I understanding this correctly? Thanks for the tips, guys. |
| Zobeid:
--- Quote from: somunny on May 25, 2008, 09:21:38 pm ---Ok.. Let me preface this by saying that I don't have the sticks in hand yet (they're still on holiday with Franco ;)). The base plate and base end up being mounted perpendicular to each other. Am I understanding this correctly? --- End quote --- The joystick base, the plastic housing, is square. Only the metal mounting plate is rectangular. You can easily orient that plate either way, horizontal or vertical as you wish. I put mine vertical. |
| Navigation |
| Message Index |
| Next page |