| Main > Main Forum |
| How do you secure your MAME PC inside your cabinet? |
| << < (2/4) > >> |
| HaRuMaN:
duck tape :D |
| lanman31337:
I hold it at knife point and tell it not to move :laugh2: |
| DaOld Man:
I placed my on a shelf, then ran a piece of mdf across the top. That baby aint going no where. I would have used duct tape, but I was all out, I used it all holding my cabinet together... |
| jasonbar:
--- Quote from: RoninEditor on May 12, 2008, 02:36:03 pm ---I just sandwiched it in with big L-brackets (almost like shelf supports)... and it doesn't slide around. Then I put an L-bracket on the top, to pinch it down, so it doesn't want to go 'up'. I did the same thing with my bass speaker. --- End quote --- Thanks, Ronin (and all you smartypants out there... :)) I secured my subwoofer in a similar fashion--stuck it in the bottom back right corner & screwed in a handful of small L-brackets & just trapped it in the corner, using a couple of layers of 1/8" foam double-sided tape to give it some shock absorption. My other idea, beyond L-brackets, was some thin-gauge strap steel (like a water heater strap system) across it in 2 directions. Thanks, -Jason |
| CrazyKongFan:
--- Quote from: RoninEditor on May 12, 2008, 02:36:03 pm ---I just sandwiched it in with big L-brackets (almost like shelf supports)... and it doesn't slide around. Then I put an L-bracket on the top, to pinch it down, so it doesn't want to go 'up'. I did the same thing with my bass speaker. --- End quote --- That's how I have my monitor supported ;) I have a 21" PC monitor, and it sticks out the back, so I just screwed a couple of shelf brackets on the inside to brace it...feels pretty solid and I don't think it's going anywhere. Probably not a permanent solution, but it'll do uuntil I come up with something better. |
| Navigation |
| Message Index |
| Next page |
| Previous page |