| Main > Main Forum |
| Using real coins as MAME credits |
| << < (3/3) |
| danp:
--- Quote from: MameMaster! on May 05, 2008, 03:07:46 pm ---see the tutorial on retroblast.com--- http://www.retroblast.com/Articles/RetroBlast-Article-Converting-to-Token-Operation.php that's how I wired mine. Good luck...it's actually pretty easy. :applaud: --- End quote --- This is exactly what I needed! Thank you very much for referring me to the site. :applaud: |
| GAJoe:
If you don't have or want to get coin mechs, or you want to use any kind of coin/slug/token, you can add an extension to the coin chute that directs all coins across the microswitch lever. I couldn't find the project where I'd seen this done, so no pictures to share, but I believe the guy just bent some thin sheet metal into a kind of tube and glued it to the chute. You could probably do it even easier and cheaper with some tin foil, carboard, or paper. |
| protokatie:
--- Quote ---If you don't have or want to get coin mechs, or you want to use any kind of coin/slug/token, you can add an extension to the coin chute that directs all coins across the microswitch lever. I couldn't find the project where I'd seen this done, so no pictures to share, but I believe the guy just bent some thin sheet metal into a kind of tube and glued it to the chute. You could probably do it even easier and cheaper with some tin foil, carboard, or paper. --- End quote --- Odd that you bring that up, that is exactly the thing I was going to do before thenasty offered the coin door/mech/etc thingy I bought off of him. I was planning on using cardpaper myself. It seemed the best suited for such a hack (also it is "free" since once you go through a lined paper pad you have the card paper backing). As per the seperate coin inputs for player one and player two, there are a good number of 2 player games out there that do rely on which coin slot you activate. I will actually have to do a little modding of the coin system I got from thenasty as it is wired up for a game that didnt care which slot the coin went into and I intend on having it support 2 seperate coin inputs. (BTW, thenasty, any idea what game that system came out of? Just curious) |
| Fozzy The Bear:
--- Quote from: GAJoe on May 06, 2008, 07:59:32 pm ---If you don't have or want to get coin mechs, or you want to use any kind of coin/slug/token, you can add an extension to the coin chute that directs all coins across the microswitch lever. I couldn't find the project where I'd seen this done, so no pictures to share, but I believe the guy just bent some thin sheet metal into a kind of tube and glued it to the chute. You could probably do it even easier and cheaper with some tin foil, carboard, or paper. --- End quote --- Yeah..... That was me..... but the tubes are made from cardboard. The only downside is that you get no coin reject and it'll take anything. At home that's not a problem. The reject pushes are also connected to the microswitch lever via a piece of coat hanger wire, so you can get a credit by pushing reject as well. I've got a lot of mechs hanging about, but I'm just too lazy to be bothered with them. Best Regards, Julian (Fozzy The Bear) |
| protokatie:
--- Quote ---I've got a lot of mechs hanging about, but I'm just too lazy to be bothered with them. --- End quote --- Im much more of a newb than you! And Atleast I will be dealing with coin mechs! * protokatie takes away your ticket to the next showing of Yahtzee-on-ice. |
| Navigation |
| Message Index |
| Previous page |