| Main > Main Forum |
| Software to design the control panel? |
| << < (3/3) |
| Encryptor:
--- Quote from: GinsuVictim on April 24, 2008, 08:37:33 pm --- --- Quote from: Encryptor on April 24, 2008, 07:18:32 pm ---How did you find it? Already have a link for it? You can't search their site and there is not a download section and the software section lists nothing. Encryptor --- End quote --- I just went to their site and navigated to the custom control panel section. Found it there. --- End quote --- The one I downloaded from their site with the link TelcoLou posted is over twice the size of the link you posted. Encryptor |
| Xb0x3r:
I used AutoCAD 2008 for my design mostly because I later had to import it into MasterCam 9 to draw out the path for the CNC Router. It looks great by the way ;D I am currently in the process of sanding everything down. I can give you my plans if you like. You can completely modify them to do what ever you want. The shape it pretty standard except it is curved at the bottom. It is 34" x 18" (at the middle of the curve) Xb0x3r |
| Jdurg:
I just used a ruler and pencil and drew out my design right on the plywood CP face. The unfortunate thing with this is that you have to go back and carefully re-measure EVERYTHING when designing your artwork. (I'm in the long, slow process of doing that right now). By designing everything on a computer and printing out a template, you'll have your exact measurements for the artwork later on. |
| Ginsu Victim:
I simply used a template I found here, edited it slightly, printed it off twice (for two players), cut it out, measured, and placed it on cardboard. Once I was happy with the mockup, I measured the distance from the sides and bottom to the template, then marked them on the wood. I placed the template on the wood and marked the drill points. For my start/admin buttons, made sure to just measure them all the same distance from the top and between each other. (I did an inch and half both ways) |
| Navigation |
| Message Index |
| Previous page |