| Main > Main Forum |
| How tall is your marquee? |
| << < (2/2) |
| CrazyKongFan:
--- Quote from: Zobeid on April 07, 2008, 02:40:37 pm ---An original Defender marquee was 24-1/4 X 7-3/4 inches. Keep in mind the marquee retainer pieces will hide a bit of the top and bottom. --- End quote --- Especially if the top piece is installed with alot of slop in it ;) I have a former Robotron cab that was converted to Final Fight. I believe it has the same dimensions at Defender, but the FF marquee was slightly taller, and they left the screws on top loose so it would hold it in. |
| NoOne=NBA=:
I'm not going to be much help here. Mine vary from 3-1/2" to 10". The 3-1/2" one is a replacement for the factory marquee on a Jaleco Pony cab. My dedicated cabs all have marquees around 5-1/2". The 10" is on a home-built. I made it that big because I needed the room for the art I wanted, and I always liked the oversized marquee on the Sega Star Trek machines. |
| Ginsu Victim:
23 5/8" x 7 1/4" Track and Field |
| phishpac:
the visible area between the marquee retainers is just under 6". |
| Navigation |
| Message Index |
| Previous page |