| Main > Main Forum |
| Versa Balltops, U360 Balltops, colors, threads, washers, HELP (please)! |
| << < (2/3) > >> |
| ids:
fwiw, I have installed the Seimitsu LB-39 bubble-tops on my U360's (from LizardLick). Not sure if that helps at all. |
| fatfingers:
For what it's worth, this site seems to claim LB-35s fit on U360. Also, I have ordered some from Akihibara Shop (sp) and they fit my U360s. Good luck. |
| arzoo:
Thanks for the replies. :cheers: I called Lizard Lick Amusements and they confirmed that the LB35 does fit the U360. If I go with the dark red, it should match the GGG Versa's. Now I just need a dust washer with a 3/8" I.D. hole. |
| Minwah:
Note that while the thread on the Sanwa/U360 is different to the GGG 'Versa' shaft, it will 'fit', as long as you don't mind the shaft cutting a new thread in the brass insert of the ball top. I did this as I wanted a bright red ball on my old 49-Way with stainless GGG shaft. While not 100% ideal, it did work fine. |
| arzoo:
--- Quote from: Minwah on April 08, 2008, 07:14:29 am ---Note that while the thread on the Sanwa/U360 is different to the GGG 'Versa' shaft, it will 'fit', as long as you don't mind the shaft cutting a new thread in the brass insert of the ball top. I did this as I wanted a bright red ball on my old 49-Way with stainless GGG shaft. While not 100% ideal, it did work fine. --- End quote --- Good to know - thanks Minwah! |
| Navigation |
| Message Index |
| Next page |
| Previous page |