| Main > Main Forum |
| Coindoor/coinmech procurement questions |
| (1/2) > >> |
| protokatie:
My basic plan for making my cab always involved getting the guts out of the way first before making the actual cab (So I knew what clearances I was dealing with as well as sizes, etc) My next purchase will be for a complete coin door + coin mech unit for a 2 player cab. Which ones would you peeps recommend for a low cost but authentic looking complete coin acceptor system? Does DM have some good deals? Are there ones I should avoid (IE the cost vs quality ends up not being worth it)? |
| Thenasty:
cheapest one would be getting a used one. Check B/S/T. I can offer you one over/under complete with .25cents mech and buckets for $25 plus S/H in USA. Might need you to touch up the paint or you can do a pretty job by stripping it first before painting, but otherwise, its good enough. |
| protokatie:
--- Quote ---I can offer you one over/under complete with .25cents mech and buckets for $25 plus S/H in USA. Might need you to touch up the paint or you can do a pretty job by stripping it first before painting, but otherwise, its good enough. --- End quote --- Is it a 2 coin mech system or just a single? If it has two coin slots + 2 coin mechs you may have a deal. |
| Thenasty:
2 slots. |
| nuka1195:
if protokatie is not interested, i may be. I'm limited on height but am looking for a two slot with 25 cent mech. Do you have a picture and dimensions? |
| Navigation |
| Message Index |
| Next page |