Arcade Collecting > Miscellaneous Arcade Talk

Getting past coin door locks

<< < (2/4) > >>

SirPeale:
Single bitted locks are pretty easy to pick.  Double not so much.  Tube, forget about it.

Lutus:

--- Quote from: newkillergenius on April 03, 2008, 12:06:26 pm ---I got a machine (through legitimate means!)
--- End quote ---

Could you expound on why "through legitimate means" was necessary?

SithMaster:

--- Quote from: csa3d on April 03, 2008, 12:14:44 pm ---If you can get in the back, you could climb through and unscrew the latch and loosen the bolt holding on the lock, and remove it that way.  If you do end up having to drill, you'd only have to do the back one to get to the coin door one.

-csa

--- End quote ---

You make it sound like hes breaking into a building via the air ducts (climbing and all).


--- Quote from: Lutus on April 03, 2008, 01:57:41 pm ---
--- Quote from: newkillergenius on April 03, 2008, 12:06:26 pm ---I got a machine (through legitimate means!)
--- End quote ---

Could you expound on why "through legitimate means" was necessary?

--- End quote ---

He's trying to trick you.  He most likely doesnt want us thinking he means to break into cabs in an establishment.

Lutus:
Ah, didn't make the connection.

As you were soldier... (as I slowly slip out the back, quietly closing the door behind me...)

Jeff AMN:
What kind of cab is it?

With many cabs you can take off the marquee, reach to the back, and unscrew the bolt to the lock to the back door. From there you'll be inside and can reach forward and unscrew the lock to the coin door and you should be just fine and dandy.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version