Main > Main Forum
Which Coin Reject buttons do I need (or Can I modify the Happ ones?)
BradC:
I bought two of these for my coin door:
But they don't fit. The coin door I have looks like this. I don't know if you can see from the pictures:
The problem is the little metal piece that holds the post onto the button won't fit through the opening in the coin door bracket to push the reject lever on the coin mech. Anyone know which reject buttons I need and where I can get them? I can take some pics of my door and the problem if that would help.
Xb0x3r:
I'm having the same problem with mine...mine was made by a company called "Coin Controls" I believe they went bankrupt but any info would be helpful. (Looking to buy a new reject button with a 25 cent insert and properly sized)
And also Brad, it would be good if you also said your coin door manufacturer (if you can figure it out)
grbgemen:
looks like the same coin mech. in my williams coin door. if so then check out lizardlick.com
http://www.lizardlickamusements.com//pages/coin_doors_parts.shtml
Xb0x3r:
OH WOW this helps me out so much! Thanks a lot.
BradC:
I don't know the manufacturer of my door, but thanks a ton grbgemen because I have a feeling that this:
is exactly what I need (along with the springs there.) Those bezels are the ones that I have so I think that's it. The reason I think these are the one is because the coin slot on the side of the button is needed. The Happ ones are blocking that slot on my door.
Thanks a bunch!