| Main > Main Forum |
| [paint] need some serious help |
| (1/9) > >> |
| clickhea:
iam on about the 10th coat now because no matter what i try the paint is not coming out right.. you can see roller marks and whatever other marks the paint is leaving.. i tried everything i could possibly think of. so now after this coat drys its time to sand it down again and try again..... iam using eggshell black. |
| HaRuMaN:
Are you sanding between coats with finer and finer grit sandpaper? Is the paint you're applying too thick (need to be thinned)? Oil or water base? |
| clickhea:
i should of added some more information iam sorry, iam very annoyed. paint : latex eggshell black method: white roller made for very smooth applications. i tried thinning the paint its still giving me horrible results. as for sanding between coats, i been using 220. |
| lanman31337:
What kind of wood, and did you put primer down? |
| clickhea:
mdf, yes 2 coats of primer, sanded the primer down till it was smooth. |
| Navigation |
| Message Index |
| Next page |