Main > Project Announcements

PC Emulators + Gameconsole in original Arcade Cab the ultimate pc2jamma Solution

<< < (3/4) > >>

abzman2000:
I don't think the US does scart, but the pinout is readily available and is a useful set of outputs to have standardized, that's the US for ya, the cool standard that other people use isn't good enough ;)

TOK:

--- Quote from: abzman2000 on June 03, 2008, 09:27:08 pm ---I don't think the US does scart, but the pinout is readily available and is a useful set of outputs to have standardized, that's the US for ya, the cool standard that other people use isn't good enough ;)

--- End quote ---

Yea, but we'd also probably buy 10 times more of that device than the rest of the world.  ;)

pc2jamma:
Hi !

SCART is the only way to connect a RGB game console. There is no other way to have a game console picture on a real arcade display.

Regards,

Dirk

TOK:

--- Quote from: pc2jamma on June 06, 2008, 01:33:28 pm ---Hi !

SCART is the only way to connect a RGB game console. There is no other way to have a game console picture on a real arcade display.

Regards,

Dirk

--- End quote ---


I think I'm lost, perhaps I'm just confusing your definition of SCART. I thought it involved the physical connector and not just that fact that it's RGB and sync lines... Does Ulimarc's PS2 and XBox adapters have a SCART connector? I thought it was VGA connnector.

pc2jamma:
Ultimarc is using their own cable which fits into the consoles AV output. They are routing this with some electronics to their connector. PC2JAMMA does it in a similar way. Instead of using a special cable it uses the (in europe) common SCART cable from the game console to the pc2jamma.


Dirk

Navigation

[0] Message Index

[#] Next page

[*] Previous page