Hello All,
Newbie here to site... I have a Rowe AMI jukebox with the jump conversion kit using the Rowelink Controller 40955703 and the orange w/black strip wire is connected to the "mute amp".
lilshawn quoted... back in 2012, see below... My question is... Do you simply ground this orange w/black wire to the ground point close to the top of the box to keep the amp working at all times from the audio input player?
Thank you all, I like this site, very informative.
Re: Advice on Rowe Ami jukeboxes
« Reply #218 on: November 11, 2012, 07:23:33 pm »
okay, it's basically like this
the orange w/black stripe wire runs from the computer to the amp (makes a stop at the light controller...irrespective.)
basically when the computer wants the cd player to play music through the amp, the computer grounds out (connects to ground) the orange w/black stripe wire and the amp "un-mutes" and allows anything playing through the audio input to play
when the song is done, the computer disconnects that wire from ground and the amp (is supposed to) mute again.