Main > Main Forum

AVGA and Beston, out of range

Pages: (1/2) > >>

XtraSmiley:

Answer is 2nd post for future answer seekers!

Dang I finally did it, click the little galaga icon on a resolution the Betson can't display and now I've got a blank screen.

Any idea how to fix this?  I thought someone posted this before, but didn't see it using search.  Anyway, usually I would fix this by booting into Safe Mode and setting the resolution down, but that didn't do anything this time.

Several answers below!

XtraSmiley:

OK, I'll post my own answer since I figured it out!

Press and hold F8 to go into the screen to choose "Safe Mode" for Windows, but don't choose "Safe Mode".  Choose "VGA Mode" instead. 

If there is no "VGA Mode" option (it's up near the top with last known good boot) choose "Safe Mode" and under settings  change the display to something your monitor can display. 

Then on next boot choose, "VGA mode".

When in "VGA mode", set the setting using the windows display settings as the Galaga icon won't work.

There, now this is here for when I forget how to do this again in 6 months.

Anyone know how to remove resolutions your monitor can't support from the Galaga icon?

Xb0x3r:

I believe Quickres will still work though I have not tried. The best thing to do in my experience, is to remove the display drivers to force it back to default Windows ones. Then restart the computer and re-install the drivers.

EDIT: I don't know how to "remove resolutions your monitor can't support from the Galaga icon" (quickres.exe). Unfortunately.

divemaster127:

hello, I have the same exact setup you have, you do realize that the betson can only do 800 x 600 i would go into safe mode & check this, sounds like your resolution is set higher


Ummon:

You can't negate any of the resolutions available through the avga unless you hack the drivers. If the circumstance is checking 15 and 25khz resolutions via your desktop, I don't know why people decide to do this, when you can do it in Mame and easily back out.

Pages: (1/2) > >>

Go to full version