Main > Main Forum
Hacking a Dualshock PSOne pad, good 411
vanRijn:
Hi Armand,
First off, THANKS VERY MUCH for documenting this!!
armad1ll0:
this is what I do,
That's about the best I can help you with. Either you can handle the soldering or it'll be a struggle.
I also charge for the service so that's another way you can get it done.
http://www.geocities.com/armad1ll0/images/Tutorials/Dualshock_H.jpg
albert_c:
Scrape the black stuff off the PCB and and wire directly to that. It's easy and solid. Why make it difficult? EB sells original PSone dual shocks for 3.99 Wires don't cost anything. You can do this yourselfs for under 5.00 I've hacked about ten of these.
alundra:
ive try both way, they both have the same respond and have no difference..if you have diffcult in soldering, i recommend scrape off the black paint and solder direct into them..unless you want yours to look neat..actually i think the way you did your is way harder than the way armadillo did..
albert_c:
--- Quote from: alundra on March 28, 2005, 05:10:28 pm ---ive try both way, they both have the same respond and have no difference..if you have diffcult in soldering, i recommend scrape off the black paint and solder direct into them..unless you want yours to look neat..actually i think the way you did your is way harder than the way armadillo did..
--- End quote ---
That doesn't make sense? You say it's easy, then you say it's harder...
Scraping off the black stuff is easier. You have much more room to work with. And if you screw up you can scrape off more of the black stuff. I'll post a tutorial later.