Main > Main Forum

24 gauge wire questions

Pages: << < (3/4) > >>

Ginsu Victim:

What I like about the solid wire is if I need to move it out of the way, I can bend it how I want (not too much), or I can wrap it around an ink pen and make it coil. No problems with crimping here either. I just expose a little more wire, then bend it back into a tight loop, put the connector on and crimp. Holds great.

Wade:

There really is no debate.  Sure, there are people who have used solid wire "with no problems", but the fact is that crimp connectors weren't designed for solid wire, and solid wire necessarily breaks more easily than stranded wire, which is designed to be flexible.

We bend a lot of rules on this forum.  Also, I'm sure that being cheap is often a factor, but I think most people use solid wire just because they don't know better.  There's a lack of a trustworthy repository for basic building questions on this forum.

I guess if you have to do something wrong electrically, use the wrong wire for CP... rather than use too small of wire for your AC lines, which is far more dangerous.

Wade

ids:

My house is wired with solid, not stranded.  If anything were to break, I'd rather it be the low power, low voltage button connectors on my CP than house wires leading to a disastrous fire.  The rumours of solid breaking, I assume, are somewhat exagerated.  Perhaps if one were to keep messing with it, but otherwise, what really are the odds?  Not to give too much credit to those who make the rules, but I would suspect those making the electrical codes in my area understand that fools like me are going to start wiring stuff in their homes.  If solid could break, than stranded would be the code, or at least recommended by some wiring-for-dummeze book.  I cannot find any such recommendation.  Now, I don't mean any dissenting opinions are wrong.  In fact, I would be very happy if someone could provide a more serious read on the subject.  I dont think solid core wires are bending any rules.  And where I shop, it tends to be more expensive.  I guess the problem with a forum is that it comes down to opinions of people we dont know - some out there may be veteran electrical engineers for all I know.  But without some documentation from a more trustworthy source.....

my $0.02 fwiw  ;)

Wade:

The wiring in your house doesn't move or get bent once it's installed, and it also doesn't have crimp connectors on the end.  Your extension cords are stranded.  Noticing a pattern?

I agree with your sentiment about not having documentation from a trustworthy source... like I said, this forum doesn't really have an expert/trustworthy section.  How can newbies know who to believe?

Wade

ids:


--- Quote from: Wade on March 25, 2008, 07:48:56 am ---The wiring in your house doesn't move or get bent once it's installed, and it also doesn't have crimp connectors on the end.  Your extension cords are stranded.  Noticing a pattern?

I agree with your sentiment about not having documentation from a trustworthy source... like I said, this forum doesn't really have an expert/trustworthy section.  How can newbies know who to believe?

Wade

--- End quote ---

Good point about extension cords.  I guess my thinking is that a CP is carefully wired, one time, and left alone, more like house wiring.  Looking at some of the really good examples of wiring on these forums, the wire is well laid out, tied down, etc.  If one were to keep bending the wires, then I could see them breaking eventually.  I don't know how much it takes to break a wire, but anyone who has tried to break metal would likely have just bent it back and forth until it snapped.

I would consider myself a newbie when it comes to wiring (I'm a software guy, not a hardware guy  ;D).  Maybe thats why I chose solid.  But I have also taken care to lay out the wire once, and not keep bending it.

Pages: << < (3/4) > >>

Go to full version