Main > Main Forum

**Tron Joystick Solution** Happ Triggerstick to Tron conversion

Pages: << < (9/10) > >>

GaryMcT:

Most excellent Bender, as usual.

DeLuSioNal29:


--- Quote from: Bender on August 21, 2009, 10:56:29 am ---And with RandyT's New handles.... Perfect!

--- End quote ---
Hmm, a year later and I've finally re-read this.  Didn't realize his handles fit the Happ sticks.  Thought they were exclusively for the Tron stock sticks.

D

Bender:

I'm pretty sure the happs were molded(or modeled) after the Tron sticks so I'm pretty sure they fit, I'll double check and post back for you

chiLLbiLLy:


I'm currently installing the Tron restrictor from Encryptor (very fast service, btw...thanks, Encryptor!) and just wanted to clarify that, although I'm not sure why, as it all seems pretty uniform to me, the side stamped "Top" should face away from the mounting plate and should be in one of the two topmost corners of the stick...either the left or right upper corner, correct?  (see photo below)

The "top of the stick" being defined as when mounted, you're pushing away from your body, of course.

Just wanted to doublecheck, as I'm notorious for ripping things apart and then putting them back together, only to discover that I either oriented something incorrectly or forgot something else entirely.    :P



Bender:


--- Quote from: chiLLbiLLy on July 09, 2011, 10:23:20 pm ---
I'm currently installing the Tron restrictor from Encryptor (very fast service, btw...thanks, Encryptor!) and just wanted to clarify that, although I'm not sure why, as it all seems pretty uniform to me, the side stamped "Top" should face away from the mounting plate and should be in one of the two topmost corners of the stick...either the left or right upper corner, correct?  (see photo below)

The "top of the stick" being defined as when mounted, you're pushing away from your body, of course.

Just wanted to doublecheck, as I'm notorious for ripping things apart and then putting them back together, only to discover that I either oriented something incorrectly or forgot something else entirely.    :P



--- End quote ---

I don't believe it matters as long as the "top" printing is facing up toward the handle

Pages: << < (9/10) > >>

Go to full version