| Main > Main Forum |
| how much have you spent on your cab? |
| << < (12/13) > >> |
| ivwshane:
So far? Way more than I was planning but it's too late to turn back now! (damn you ggg!) I already had the wood and most of the tools and who knows how much paint and art will be:o (best viewed in firefox) --- Code: ---UltraStik 360 Oval Top with USB cable Color: Black 2x $59.00 $118.00 UltraStik Button / Encoder Harness 2x $8.00 $16.00 Electric ICE™ Lightable Horizontal Pushbutton - Microswitch None 14x $2.25 $31.50 RGB-Drive™ Pushbutton Lighting module - Configuration Installed RGB LED, Resistors and 24" 4-conductor cable 14x $3.95 $55.30 Micro-Leaf™ Arcade Pushbutton Switches 14x $2.75 $38.50 LED-Wiz™ 32-port USB Lighting and Output Controller - Device Number 1 (Use if FIRST or ONLY device of this EXACT type) 1x $44.95 LED-Wiz+GP™ 16 Output + 16 Input, Output and Gaming Controller - Device Number 2 1x $39.95 Electric ICE-T™ Deluxe RGB Arcade Trackball V2.0 - Trackball Size 3 inch - Default Port & Cable Type USB - USB Device Number 1 (Use if FIRST or ONLY of this EXACT controller) 1x $116.95 Electric ICE™ Lightable Horizontal Pushbutton - Microswitch Cherry™ w/ RGB-Drive and 2' cable 4x $6.49 $25.96 1.125 Inch Wood Boring Bit 1x $2.99 Samsung 27" HDTV 4:3 1x $399.99 40-0055-00 DOOR ASSY,SMALL, 2 SLOT, $.25 PLASTIC (HP) MECH 1x $68.20 42-0517-07 Reject Button Assembly - Red 2x $4.80 $9.60 49-1000-00 Retainer for Video Game Marquee 1x $13.35 Triple red leds 2x $3.49 $6.98 3/4" White T-Molding 40x $0.37 $14.80 Whiteside Slotting Cutter 1/16" 3-Wing 1x $17.95 Whiteside Slotting Cutter Arbor 1/4" Shank, 2-3/8"OL 1x $9.95 One day glass 25 5/8" x 23 7/8" Shape: Square/Rectangle Glass Type: Tempered Glass Thickness: 3/16" Glass Tint: Solar Gray (Light Gray) Edgework (Step 1): Seamed Edge 1x $51.67 Sub total $1069.24 --- End code --- |
| wbassett:
Where did you get the Samsung 27" HDTV 4:3 and what are the dimensions of it? I assume this has a VGA input in addition to the HDMI inputs. How do you like it so far and have you used any light guns with it yet? |
| ivwshane:
I bought it new at circuit city:o (it was $400). I would have preferred a real monitor but no one carried (as in had in stock) the one I wanted (billabs). I have not tried it with a light gun yet (I'm trying to avoid playing with it till I'm done). And no vga connectors. While the little tests I have done with it looked fine to me, I would highly recommend just getting an arcade monitor. You will have a much easier time mounting it. http://www.amazon.com/Samsung-TXS2782H-Slim-Fit-HDTV/dp/B000F2R5MY The moiring is due to the camera not the tv. |
| wbassett:
I don't want to take this thread off track... but could you take a closeup shot of the inputs? I'd like to be able to connect a PS2 as well as a Mame PC. As far as mounting, I like what you did but I most likely would keep it in the case and set it in the cab that way. |
| Namco:
Cab - $200 Controls - $60 iPac - $50 Artwork - $300 Paint, Wood, Tools - $200 Monitor - Free Computer - Was free, until I upgraded it - $100 ===================================== $901, but that's a rough estimation. Maybe it was more, maybe it was less. I spent a lot on artwork and tooling up. If I were to build another one, I could do it for around maybe $400 or $500. However by the time I build another one, the US dollar will be nearly useless, so make that $1600 in future US monopoly worthless paper, or $120 in Euros ;D |
| Navigation |
| Message Index |
| Next page |
| Previous page |