| Main > Main Forum |
| How are Happ Competitions supposed to be mounted in a metal CP? |
| << < (2/2) |
| TheShanMan:
Obviously mine didn't come with an extra spacer either. Maybe you'll get lucky and the hardware store will have a spacer that fits the shaft perfectly, rather than spacing at the mounting points. Too bad the guy didn't offer to send you some extra spacers to cut so you could avoid cutting the ones that came with the sticks. While their oversight on this is disappointing, it's hard to complain too much about an $8 joystick! Let us know what your solution ends up being. |
| NoOne=NBA=:
I've custom trimmed the spacers on mine to adjust the Groovy Game Gear shafts I have to exactly the height I wanted. They are very easy to Dremel, or you can grind them down on a belt sander. Just watch your fingers. I don't want to be resposible for you missing parts of them. The other option is to cut your own E-clip grooves with a Dremel. You just need to make them straight, and the same depth as the existing ones. Using tape to mark the space off an existing groove will let you know where you need to be. |
| Navigation |
| Message Index |
| Previous page |