Main > Monitor/Video Forum
How to use SCART for our hobby
Paradroid:
--- Quote from: orchidius on November 19, 2011, 02:27:57 pm ---Any ideas what this could be?
--- End quote ---
I used the cable type documented here: http://experts.windows.com/frms/windows_entertainment_and_connected_home/f/14/t/39520.aspx
This cable has worked with all the various video cards and TVs I've tested so far.
Maybe worth a try?
orchidius:
I currently have the following cable setup:
VGA -----------> SCART
1 15
6 13
2 11
7 9
3 7
8 5
9 100ohm 16
5 18
13 1000ohm 20
14 1000ohm 20
10 17
But this setup is not working. Here's the picture I'm getting: http://imageshack.us/photo/my-images/39/img0788d.jpg/. Could the problem here be that the card is too "new" for the soft15khz tool? Are the drivers not right? Is the cable not right (again)? Could it be fixed with a dongle?
Please help!
apfelanni:
have u checked the vga pin 9 voltage ? there are only very old vga cables with pin 9 wired and some graphiccards may not put out the 5 volt. sailersat should know if the nvidia card needs a dongle .
Zebidee:
Yeah, ditto to apfelanni's comment. Only some video cards output 5v on VGA pin 9
ATI cards do (this includes Ultimarc ArcadeVGA cards, which are based on ATI), but many other manufacturers do not.
orchidius:
So a possible solution is to go back to the molex to add the 9v and the 12v?