| Main > Main Forum |
| 7/8" tmolding..is black the only option? |
| (1/3) > >> |
| muffin man:
i got a hold of a cab and im looking to give it a new look the width of wood is 7/8" now ive looked and looked and black is the only tmolding i can find i want a green colored one to match happy any ideas on how i can either paint a black one or get a hold of green 7/8" tmolding? |
| SirPeale:
You must not have looked very far. http://www.tmolding.com |
| muffin man:
the only thing i see is black textered and smooth :/ no green in 7/8" http://www.t-molding.com/store/home.php?cat=13 |
| SirPeale:
I have to apologize. I didn't see the 7/8" when I read your post this AM. I haven't been feeling well and I snapped at you (in Internet fashion, of course). I was speaking generally regarding color. |
| DeLuSioNal29:
I had the same problem myself and here's what I found: I believe you can only fine 7/8" t-molding in black. It is also sometimes referred to as 14/16". I scoured the web and called up places and they either had black or black leather. No other colors. :( The closest that you can get to the size that you want is 13/16". The good news is that you can get other colors besides black. The bad news is that it is just shy of 14/16". But if you are using a router to cut the slot, you can off set it by 1/16" and then paint the bottom black (or use a black Sharpee) and chances are that no one will notice. ~ DeLuSioNaL |
| Navigation |
| Message Index |
| Next page |