| Main > Main Forum |
| FIXED-Coin mech help. (Coin gets stuck) |
| (1/1) |
| Ginsu Victim:
EDIT: I fixed the problem. Seems the first arm that catches the coin was slightly bent, so the coin just shot through. I bent it back with a pair of pliers and now it's working great! I just received two new coin mechs from Mikesarcade (http://www.mikesarcade.com/cgi-bin/store.pl?sku=COINMECHS) today and one of them is giving me trouble. The coin gets stuck here: It works fine on the other. What do I need to adjust to get the coin to pass through? Thanks. |
| Thenasty:
Let the coin get stuck then, try to tighten that PHILIP SCREW just a tad till coin falls. |
| Ginsu Victim:
Thanks, I'll give that a shot. (At work, so it's hard to try at the moment) |
| Ginsu Victim:
Alright, I tried adjusting the screw and no matter how I do it, it either catches in the first arm and doesn't release it, or it falls straight down past the arm and gets caught under it and I have to reject it out. Any suggestions? |
| Navigation |
| Message Index |