Main > Buy/Sell/Trade - non-retail
WTF 32MB 72 pin SIMM EDO 60NS Memory
(1/3) > >>
SteveJ34:
I found a Brother HL 1440 15PPM monochrome laser with plenty of life left in its drum.

I would like to max its memory and need a single stick of 32MB 72 pin SIMMs to do it.

Found a bunch of 16mb sticks in my junk pile, anyone have a 32MB stick?

(This is Pentium I era memory and some last generation 486s).

Steve
Encryptor:
Unfortunately I dumped most of that stuff a while ago but let me see if I can find any at work. It may take me a day or two but I'll let you know.

Encryptor
Hoopz:
And it used to cost a fortune!  I remember 16 or 32 megs costing $100+.  I'll dig too in case Encryptor can't find any. 
gonzo90017:
Well if there's any left over after SteveJ34 is done. Hopefully I can get in on the action (if that's ok). I have an old p1 that i'm trying to put some games in but with only 16mb it's a no go.
SteveJ34:

--- Quote from: gonzo90017 on February 20, 2008, 02:08:06 am ---Well if there's any left over after SteveJ34 is done. Hopefully I can get in on the action (if that's ok). I have an old p1 that i'm trying to put some games in but with only 16mb it's a no go.

--- End quote ---

You can have one or more of my 16mb modules but with likely (4) slots that would only get you to 64mb. Most old boards that use these will have a 128k limit.

I had 2k loaded on the old box that these came out of quietly running an FTP server till I finally decommissioned it about 24 months back.

Not sure what games you are trying to get up and running....

Navigation
Message Index
Next page

Go to full version