Main > Main Forum
Ipac slow button response?
DeLuSioNal29:
I also have a PS2 version and have not encountered this problem.
However, here's something to try to rule out the PS2 port on the motherboard. Plug in a USB adapter into the ipace and then plug in a USB cable from there to the computer's USB port. See if still has the lag then. If it doesn't then it's a faulty PS2 port on your motherboard.
~ D
Turnarcades:
Ditto. This was gonna be my next suggestion.
Being a VIA chipset should be irrelevant, as I've not had problems on similar chipsets.
pressthebutton:
Thanks for the suggestions.
I've connected a USB keyboard to the mobo (usb port) and the lag is still there.
Man, should I give up on this one? Both pIII mobos display the same problem either in ps2 or USB keyboard port.
Guess I'm going to have to buy a new pc just because of this...
It sucks....! I had the cab almost ready except for this unexpected :badmood: problem.
PB
pressthebutton:
A friend suggested to delete the windows pagefile (virtual memory) as it is known to influence this type of behaviour but no luck. The problem persists.
PB
protokatie:
--- Quote ---A friend suggested to delete the windows pagefile (virtual memory) as it is known to influence this type of behaviour but no luck. The problem persists.
--- End quote ---
DL a copy of Knoppix, burn it onto a CD (or a DVD if you DL that version). Boot off of the knoppix disc and see if you still have the lag. If the lag is still present, then it is a hardware thing, not an OS thing... If not, you may need to reinstall windows or look for better drivers...