Main > Main Forum
Key Switch
(1/3) > >>
QuarterJunkie:
I want to incorporate a key switch on my cab to switch from credit button/coin door to coin credit only. Does anyone have any recommendations as to a good source for this type of switch? I would prefer a tube type switch that will mount in my 3/4" mdf.

Thanks!
somunny:
I have one that I believe is made by Allen Bradley.  It's BIG.  I'll post a pic of it when I get home.
brock.sampson:
I would think this should work.  http://www.amazon.com/Key-Switch-with-2-Keys/dp/B0002BA3PE.  I have some toggle switches mounted inside the coin door where the test switches were originally to do the same thing.
mountain:

--- Quote from: brock.sampson on February 15, 2008, 02:12:34 pm ---I would think this should work.  http://www.amazon.com/Key-Switch-with-2-Keys/dp/B0002BA3PE.  I have some toggle switches mounted inside the coin door where the test switches were orginally to do the same thing.

--- End quote ---

I have this exact switch. It will work but it will not fit in a 3/4" hole. You might be able to modify a button and drop it in the button casing.
shardian:
You can pick up a cheap keyed ignition switch at Autozone/Advance Auto.

Your coin door already has a keyed entry though, so just put a toggle inside there.
Navigation
Message Index
Next page

Go to full version