| Main > Main Forum |
| First Time Confusion - help! |
| << < (4/5) > >> |
| CheffoJeffo:
--- Quote from: RetroACTIVE on February 11, 2008, 01:34:19 pm ---Personally I agree with you 100% but for some its like... "cookie dough from a plastic tube" vs "recipe from the back of the toll-house bag" ;) --- End quote --- I really want to say something about the baking analogy, but all I can come up with is bork, bork, bork! To get back on topic -- I, as others have already mentioned, tend to solder with leafs and use QDs with microswitches. |
| BORIStheBLADE:
--- Quote from: ChadTower on February 11, 2008, 01:39:03 pm --- --- Quote from: BORIStheBLADE on February 11, 2008, 01:33:09 pm ---I would go with crimping because you can always disconnect and replace easier with a crimp. --- End quote --- Not once you're good at it. It only takes a couple of seconds to desolder from a lug. It takes just as much time to carefully work a tight QD off of the lug. The only time that would really make a difference is when you're far from an electrical outlet. As someone who mostly restores cabs I have to deal with other peoples' crimping "skills" all the time. Sure looks to me like most field ops couldn't work a proper crimp if they had 100 tries. I end up cutting the QDs off and soldering to the lugs more often than not. --- End quote --- What if I'm the crimp master? ;D |
| ChadTower:
--- Quote from: BORIStheBLADE on February 11, 2008, 04:34:08 pm ---What if I'm the crimp master? ;D --- End quote --- Then you have enough skills to not be asking questions about crimping. :cheers: |
| DeLuSioNal29:
You know, this topic just gave me a good idea. I think I am going to post a video on youtube of my control panel and how it connects to the computer. This should help beginners tremendously. Give me a week or so to get it captured and uploaded. I have an ipac connected to my PC with a pass thru keyboard attached to the ipac. ~ DeLuSioNaL |
| protokatie:
--- Quote ---Give me a week or so to get it captured and uploaded. --- End quote --- Laziness is unnacceptable! (Unless it is me who is being lazy, as I wrote the book on it.. Or rather I WILL once I get around to it!) Anyways, yes that is a good idea. In fact, maybe start a sticky thread with vids/pics showing how people wire up their CPs for others to peruse. This sort of thing is a good candidate for being stickied on this forum. |
| Navigation |
| Message Index |
| Next page |
| Previous page |