| Main > Main Forum |
| Control Panel Slope |
| (1/2) > >> |
| weisshaupt:
So what is the generally accepted slope for the Control Panel surface? Anybody know what Knievel generally uses? |
| Jdurg:
My CP is about 16" deep and I have it sloping from 6" at the back to 4.5" at the front. This seems to give it a good slope that i'm comfortable with. |
| Kajoq:
You don't really need a whole lot. 1-2" down from back to front is going to be plenty for most "normal" sized CPs. |
| javeryh:
Knievel uses exactly a 5 degree slope. 5-1/4" in the back to 4-1/4" in the front. |
| Hoopz:
--- Quote from: javeryh on February 10, 2008, 12:16:50 pm ---Knievel uses exactly a 5 degree slope. 5-1/4" in the back to 4-1/4" in the front. --- End quote --- Sounds like info only a stalker would have. ;) ;D |
| Navigation |
| Message Index |
| Next page |