Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: The ARK Project - Lost? Not yet!  (Read 132283 times)

0 Members and 1 Guest are viewing this topic.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
The ARK Project - Lost? Not yet!
« on: February 03, 2008, 10:37:53 am »
We have top men working on it right now...

Who?

Top... men.

Well, I've finally decided it's time to begin what I think will be my last cabinet.  I'm basing the design on The Ark of The Covenant (with some creative license  ;)).  This was the first Shetchup design I've attempted so my skills aren't quite up to snuff yet.



The dimensions aren't to scale yet and I think this design is too long and narrow but it's a start.  Here's a few other ideas I have sorted out now:

22" CRT monitor turned long ways for vertical games only  
One stick (probably Mag Pluses) and three buttons for each player
Amber LED's tucked under the bottom to produce a glowing effect
Provision for two carrying poles, similar to what was used in the movie
Laminate the entire cabinet with Wilsonart gold Metalaminate

I have a sample on the way.  The stuff is expensive! $6.00 a square foot which puts a sheet at around $200.  :o  I estimate using two sheets so this will be the costliest single purchase for the project, by far.

The name is tentatively set as 'Raiders of the Lost Arcade'.  Not the most original name but I think it has a nice ring to it.

Wish me luck!  8)
« Last Edit: December 13, 2010, 12:32:08 am by somunny »

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38211
  • Last login:October 19, 2022, 12:01:54 pm
Re: We have top men working on it right now...
« Reply #1 on: February 03, 2008, 11:35:36 am »

Nice concept.  Have you seen the stuff in person yet?  Any idea if it will retain that shine with a little wear and tear?  Or if it's going to be a huge fingerprint magnet?

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: We have top men working on it right now...
« Reply #2 on: February 03, 2008, 11:42:21 am »
 :o :o :o :o

That's going to look sweet! :)  When do you start the build?  Do you have a computer already?

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: We have top men working on it right now...
« Reply #3 on: February 03, 2008, 11:52:01 am »

Nice concept.  Have you seen the stuff in person yet?  Any idea if it will retain that shine with a little wear and tear?  Or if it's going to be a huge fingerprint magnet?

I haven't held it in my hands just yet.  Hopefully this coming week.  I'll post picks and results of the fingerprinting test then.  I may have to invest in a velvet rope and pole setup, too! There is also a brushed style available that I'm looking at.  It may cut down on the visible surface marks.

:o :o :o :o

That's going to look sweet! :)  When do you start the build?  Do you have a computer already?

Thanks, H!  As soon as I get the laminate sample and check it out, I'm going to start cutting the wood.  As far as the pc goes, I figured since I'm only going to be using it for vertical games, I might be able to get away with using a 900mHz Celeron I have laying around. 

Anyone have thoughts or opinions on this choice?

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: We have top men working on it right now...
« Reply #4 on: February 03, 2008, 12:16:45 pm »
Any newer vertical games, such as shooters like Giga Wing, etc?

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: We have top men working on it right now...
« Reply #5 on: February 03, 2008, 12:21:17 pm »
Any newer vertical games, such as shooters like Giga Wing, etc?

Yeah, I suppose so.  May be time to upgrade.

bishmasterb

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 390
  • Last login:March 23, 2014, 09:27:47 pm
  • Pressing the limits of my wife's patience...
    • Bishopzone
Re: We have top men working on it right now...
« Reply #6 on: February 03, 2008, 12:58:51 pm »
The dimensions aren't to scale yet and I think this design is too long and narrow but it's a start.
Dude!? All the design work has already been done for you!

Make it a cubit and a half wide and high, and two and a half cubits long. And of course the frame should be made from acacia wood. Additionally, you're the only one allowed to play games on it, and only once a year.    ;)
"We have just enough religion to make us hate, but not enough to make us love one another." -Jonathan Swift

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: We have top men working on it right now...
« Reply #7 on: February 03, 2008, 01:35:09 pm »
Any newer vertical games, such as shooters like Giga Wing, etc?

Yeah, I suppose so.  May be time to upgrade.

I build computers...   ;D

aszurom

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:October 14, 2013, 05:00:14 pm
Re: We have top men working on it right now...
« Reply #8 on: February 03, 2008, 01:51:44 pm »
First game you play on it better be Indy Jones and the Temple of Doom.

Jimbo

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1014
  • Last login:March 06, 2024, 08:12:05 am
  • I have no idea what I'm doing.
    • Wood Finishes Direct
Re: We have top men working on it right now...
« Reply #9 on: February 03, 2008, 02:12:16 pm »
Man, that's such a sweet idea... it's one of those "now why didn't I think of that?" ideas :)

Nice one... I'll be watching this project closely!  Love the name too!  :applaud:

 :cheers:

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: We have top men working on it right now...
« Reply #10 on: February 03, 2008, 02:23:19 pm »
I build computers...   ;D

Hehe...  I built four in 2007.  Two for myself and two for family members.

First game you play on it better be Indy Jones and the Temple of Doom.

Sadly, Temple of Doom, the only Indiana Jones inspired video game IIRC, is horizontal.   :(

The one thing that may hang me up here is the artwork.  I feel pretty confident in my Photoshop skills (as fledgling as they are) but I'm more of an image manipulator than anything else.  My freehand skills are pretty lame and I really want this one to be special.  I was actually thinking about comissioning a fan-artist to produce something.  This could get pricey, though...  I'll most likely put something together to see how it comes out.




HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: We have top men working on it right now...
« Reply #11 on: February 03, 2008, 05:12:12 pm »
I build computers...   ;D
Hehe...  I built four in 2007.  Two for myself and two for family members.

Cool...  I built my first one about 1.5 years ago.  I'll never buy another store-built system.   :cheers:

golfboyusa

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 102
  • Last login:October 12, 2018, 12:44:25 pm
  • Kinda tired....think I'll go home now.....
    • Ted's Arcade
Re: We have top men working on it right now...
« Reply #12 on: February 04, 2008, 07:56:38 pm »
What a great name for a cab. Just in time for the new Indy movie! How about putting an image of a snake circling the monitor bezel?? ;D

Singapura

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 496
  • Last login:April 24, 2015, 08:43:05 pm
  • I, for one welcome our new insect overlords!
Re: We have top men working on it right now...
« Reply #13 on: February 04, 2008, 09:06:57 pm »
Eeehr, maybe it's a stupid remark but since it's a cocktail, why don't you put an extra CP on the side so you can at least play horizontal games as well?  ??? You might even make it detachable.
Wish list: Galaga, Pacman, Pooyan, Star Wars cockpit, Gauntlet, Tron

And the Lord spake, saying, 'First shalt thou take out the Holy Pin. Then, shalt thou count to three. No more. No less. Three shalt be the number thou shalt count, and the number of the counting shall be three. Four shalt thou not count, nor either count thou two, excepting that thou then proceed to three.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: We have top men working on it right now...
« Reply #14 on: February 04, 2008, 09:24:02 pm »
Eeehr, maybe it's a stupid remark but since it's a cocktail, why don't you put an extra CP on the side so you can at least play horizontal games as well?  ??? You might even make it detachable.

That's a valid suggestion.   However, the reason I'm doing a vertical game only design is that I believe it allows me to make the cabinet as "Ark-ish" as possible.  I also have two other scratch built uprights with monitors oriented to favor horizontal games so I can get my fix there.  :)

brandon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 807
  • Last login:October 19, 2023, 03:08:43 pm
  • I <3 arcade games.
Re: We have top men working on it right now...
« Reply #15 on: February 05, 2008, 12:35:46 am »
The name is tentatively set as 'Raiders of the Lost Arcade'. 

dude.. that's totally lame...

J/K  :D  I like it!  I'm actually surprised that nobody has thought of that before! There's tons of Indy pics you can find on the net from movie posters and such... maybe something like this:   ;)



RetroBorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 818
  • Last login:July 06, 2022, 09:22:13 am
  • Your arcade games will be assimilated!
Re: We have top men working on it right now...
« Reply #16 on: February 05, 2008, 02:54:19 pm »
J/K  :D  I like it!  I'm actually surprised that nobody has thought of that before!

Not quite.

OK well since you like movie spoof titles, how about:

Police Arcademy
Citizen Kade
Raiders of the Lost Arkade
It's a Wonderful Last Life
Lawrence of Arcadia
Arcadian Beauty
Arcadalypse Now
The Bridge Over River Kade
Arcadian History X
2001: A Space Invaders
Donnie Darcado
Kade Bill Vol 2
Cade Runner

ok now I'm getting silly...  ;D




brandon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 807
  • Last login:October 19, 2023, 03:08:43 pm
  • I <3 arcade games.
Re: We have top men working on it right now...
« Reply #17 on: February 05, 2008, 03:52:40 pm »
well.. he spelled arcade with a "C"  :P

MazzMn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 142
  • Last login:March 19, 2013, 12:38:19 am
  • chicken, fight like a robot
    • The IceBox Oak Cocktail Table
Re: We have top men working on it right now...
« Reply #18 on: February 06, 2008, 01:32:51 pm »
The name is tentatively set as 'Raiders of the Lost Arcade'.  Not the most original name but I think it has a nice ring to it.

Wish me luck!  8)


Good Luck! I like this design and I like the name/theme
I don't know how, but after a few googles I came up with this article...a Futurama episode by the same name...I love this show and this episode looks great for byoac-ers:  :laugh:

http://blog.wired.com/games/2007/12/video-games-fut.html

Ritalin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 148
  • Last login:May 07, 2015, 12:25:39 am
Re: We have top men working on it right now...
« Reply #19 on: February 07, 2008, 06:30:46 am »
This project sounds like a fantastic idea.
Can't wait to see the progress.

brandon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 807
  • Last login:October 19, 2023, 03:08:43 pm
  • I <3 arcade games.
Re: We have top men working on it right now...
« Reply #20 on: February 07, 2008, 11:17:10 am »
$400 seems VERY expensive for laminate...  Hell, you could gild that thing in real gold leaf for that!  You might want to check this out...  http://www.gildedplanet.com/compoleaf.asp

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: We have top men working on it right now...
« Reply #21 on: February 07, 2008, 10:45:17 pm »
The Samples of Doom...

So, the laminate samples arrived today from Wilsonart.  They're covered in a plastic, protective film, which is nice.  Both are 5" x 8", which is a pretty generous size considering what I've received in the past.  One is has a polished gold finish, the other is brushed.  This stuff is difficult to photograph so bear with.



Each style has several pros and cons as far as the project is concerned:

Polished:

Pros -

most closely resembles the finish of the screen used Ark
mirror-like finish is amazing
fingerprints don't show up as much as I would have thought

Cons -

mirror finish may reflect too much of the surroundings, thereby ruining the effect
fingerprints still show (see pro)
scratches are very noticeable

Brushed:

Pros:

No fingerprints
Scratches not as noticeable
Does not reflect

Cons:

Not even close to the movie Ark finish
Appears somewhat dull

This is going to be a hard decision.  The main factor worrying me is that the polished lam will reflect everthing in the room around it and turn it into a hodge-podge of colors (it's literally like having a golden mirror).  While the brushed sample appears dull (technically, I would call it satin) it also looks more "yellow-gold" in color due to it not reflecting anything around it. 

The durability aspect doesn't really bother me as the stuff it pretty tough.  I scratched both samples with a screwdriver but I think they will do just fine under normal indoor conditions.  Just keep your zipper tucked in!

$400 seems VERY expensive for laminate...  Hell, you could gild that thing in real gold leaf for that!  You might want to check this out...  http://www.gildedplanet.com/compoleaf.asp

I knew it was expensive going in and I think the laminate will prove to be far more durable than the gilding.  I'll probably end-up having some parts gold electro-plated, though.

J/K  :D  I like it!  I'm actually surprised that nobody has thought of that before!

Not quite.

Like I said in my first post, I knew the name wasn't the most creative but I like it.  Hopefully Ray B. won't see this thread.  I'd hate to have to pay him royalties.  ;D

Everyone else, thanks for the kind words.  I'll be cutting some templates out this weekend.
« Last Edit: February 08, 2008, 11:29:19 pm by somunny »

Knievel

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 965
  • Last login:July 10, 2016, 10:29:09 pm
  • Who's up for a game of Stunt Cycle??
    • Knievel Kustoms
Re: We have top men working on it right now... Laminate samples are in!
« Reply #22 on: February 08, 2008, 04:21:22 pm »

Cool project, I'm a big Indy fan. :)

I'll throw my 2 cents in here as I work with laminates all the time including the metal ones.
I would go for the brushed one, for the reasons you have mentioned. Fingerprints on the polished one will drive you mad.

It will also be a miracle if you don't scratch a piece or 2 during the build.
They won't be noticeable on the brushed but will stick out like a whip-scar on the shiny stuff.

Also are you purchasing the laminate from a distributor? Home Depot, etc can have quite a mark-up on this stuff.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: We have top men working on it right now... Laminate samples are in!
« Reply #23 on: February 08, 2008, 06:44:02 pm »
Knievel, the more I think about it the more I lean towards the brushed.  My original vision was based around the polished finish which is why changing now is such a difficult decision.  I'm still toying with the idea of using some of both finishes as they do compliment each other pretty well.

Also are you purchasing the laminate from a distributor? Home Depot, etc can have quite a mark-up on this stuff.

The price I was quoted was from a Wilsonart distributor.  There's one near me in Tempe, AZ.
« Last Edit: February 08, 2008, 10:37:23 pm by somunny »

Knievel

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 965
  • Last login:July 10, 2016, 10:29:09 pm
  • Who's up for a game of Stunt Cycle??
    • Knievel Kustoms
Re: We have top men working on it right now... Laminate samples are in!
« Reply #24 on: February 08, 2008, 07:35:41 pm »

Didn't think about a mix of the 2, that could work.

Yea that price sounded right, just checking. :)

mccoy178

  • It's hard to work with a straight jacket on
  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3127
  • Last login:September 03, 2021, 10:23:42 am
  • Go Bucks!
Re: We have top men working on it right now... Laminate samples are in!
« Reply #25 on: February 08, 2008, 08:57:17 pm »
What the heck man?  Don't you know to edit photos? ::)

Nice idea on the cabinet btw, Somummy! :cheers:

EDIT:  Wanted to clarify that I was talking about the naked guy painted in gold that Brandon posted and nothing to do with the OP.
« Last Edit: February 09, 2008, 09:57:48 am by mccoy178 »

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: We have top men working on it right now... Laminate samples are in!
« Reply #26 on: February 08, 2008, 11:32:23 pm »
What the heck man?  Don't you know to edit photos? ::)

Nice idea on the cabinet btw, Somummy! :cheers:

Better now?  ;D  Okay, I'm an image posting moron.  But a quick google search has shown me the light.  Thanks!

brandon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 807
  • Last login:October 19, 2023, 03:08:43 pm
  • I <3 arcade games.
Re: We have top men working on it right now... Laminate samples are in!
« Reply #27 on: February 08, 2008, 11:41:44 pm »
What the heck man?  Don't you know to edit photos? ::)

Nice idea on the cabinet btw, Somummy! :cheers:

he was referring to my since deleted post which apparently wasnt nearly as humorous as I thought is was
Better now?  ;D  Okay, I'm an image posting moron.  But a quick google search has shown me the light.  Thanks!

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: We have top men working on it right now...
« Reply #28 on: February 12, 2008, 09:17:05 pm »
Well, I've got the templates drawn up.  Just need to cut them out.  I usually end up doing all the real design work when I'm drawing the pieces on the wood so it takes awhile.  I'm trying to keep it simple enough while still conveying a the general shape of The Ark.  I started to add some fancier curves but decided against it.  I think in the end, a simple design will be better.

I also received the gold t-mold sample in the mail from tmolding.com.  It's a slightly different gold than the laminate but I think it will contrast nicely.  One interesting note;  I never knew this but gold t-mold is actually clear molding with gold tape over the visible surfaces.  Seems durable enough.  Go figure.   :dunno


RetroACTIVE

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1429
  • Last login:January 28, 2024, 04:27:52 pm
  • Gramps
Re: The ARK Project...
« Reply #29 on: February 13, 2008, 04:04:32 pm »
Hey... when you turn that thing on... or somewhere in your FE software... you gotta play that low frequency humm the ark puts out in the movie... eeerrie and totally cool.  :D
Happy Gaming!

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project...
« Reply #30 on: February 13, 2008, 05:41:16 pm »
Hey... when you turn that thing on... or somewhere in your FE software... you gotta play that low frequency humm the ark puts out in the movie... eeerrie and totally cool.  :D

I like this idea.   :cheers:   I'll see if I can capture and loop that sound effect.  I'm also planning on having an amber glow coming from the underside.  LED strips or a couple of "neon" speaker rings.  I haven't decided which yet.

EDIT:  I captured the humming sound from the Raiders dvd and turned it into a ten minute loop.  I'm pretty happy with the way it came out.  I'd put a smple up but I have no idea how to link to audio files.
« Last Edit: February 13, 2008, 10:49:02 pm by somunny »

RetroACTIVE

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1429
  • Last login:January 28, 2024, 04:27:52 pm
  • Gramps
Re: The ARK Project...
« Reply #31 on: February 14, 2008, 11:49:53 am »
EDIT:  I captured the humming sound from the Raiders dvd and turned it into a ten minute loop.  I'm pretty happy with the way it came out.  I'd put a smple up but I have no idea how to link to audio files.

Nice... :applaud:

I'm thinking there are soooo many way cool FE themes with this one...  8)
Happy Gaming!

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project...
« Reply #32 on: February 14, 2008, 01:40:02 pm »
Awesome's  8)

This is gonna look scha-weeeet!  :)

The chrome t-moulding is the same as the gold in that its clear plastic with a chrome layer. I used the chrome on my last cab and it its plenty durable so you should be fine there.

Looking forward to seeing the progress :)

RetroACTIVE

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1429
  • Last login:January 28, 2024, 04:27:52 pm
  • Gramps
Re: The ARK Project...
« Reply #33 on: February 14, 2008, 01:49:06 pm »
I was thinking about what you said about only vertical games, so as not to detract from the original "ark-ness" of it...

Not sure if there would be a way to do this (space restrictions...complexity... etc), but if you could have the side tilt in and out, you may be able to incorporate horizontal games as well..

Of course its something that would have to come out real nice... you wouldn't want it to look crappy or be gimmicky... it would have to be flawless and flow with the whole thing.
Happy Gaming!

Xiaou2

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4098
  • Last login:November 12, 2023, 05:41:19 pm
  • NOM NOM NOM
Re: The ARK Project...
« Reply #34 on: February 14, 2008, 10:15:29 pm »

 You might want to experiment and try to use some sort of translucent airbrush paint over
the samples.  Maybe a yellow or orange.   That way it would look a bit more yellow, as well
as having a more solid color from all angles.  Ive never tried this before, but I suspect its
possible to do.

 The design is decent.  But, you may wish to consider getting someone with a lathe to cut you
some nice round legs for it.   Also,  where are the Arks 'Carrying bars' ?  :)

 Ive always loved the Jones series,  esp  TOD.  :)


somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project...
« Reply #35 on: February 14, 2008, 10:25:23 pm »
The design is decent.  But, you may wish to consider getting someone with a lathe to cut you
some nice round legs for it.   Also,  where are the Arks 'Carrying bars' ?  :)

I have considered adding legs, although I was thinking of using aluminum and having it anodized gold.  Funny you should mention the carrying bars as I have always though that they would be a cool addition.  I plan on adding cutouts for them once I have the templates finished.

I've always had a fondness for TOD, as well.  I think it gets a raw deal and is solidly my second favorite of the series.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project... Cutting templates
« Reply #36 on: February 21, 2008, 09:34:25 pm »
Well, I have one of the end templates cut out and am part way through the side template.  Here's the result:



Here's a pic of the wing piece drawn out and ready to be cut. 



Normally, I don't use templates but I wanted the sides to be perfectly symmetrical, plus I'm doing most of the real design work as I'm drawing the templates out anyway. 

In true Indy fashion, I'm making this up as I go...

DaOld Man

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5139
  • Last login:December 13, 2023, 12:03:14 am
  • Wheres my coffee?
    • Skenny's Outpost
Re: We have top men working on it right now... Laminate samples are in!
« Reply #37 on: February 21, 2008, 09:47:46 pm »
I'll throw my 2 cents in here as I work with laminates all the time including the metal ones.
I would go for the brushed one, for the reasons you have mentioned. Fingerprints on the polished one will drive you mad.

Maybe you could use the metal, tie it to the flyback transformer on the monitor. If anyone touches it... ZAPP!! Just like in the Bible!
This would take care of the fingerprints too..

(Jes kiddin)

BASS!

  • Just have fun.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 837
  • Last login:August 10, 2013, 03:12:33 am
Re: The ARK Project... Cutting templates
« Reply #38 on: February 21, 2008, 11:22:25 pm »
Hey there,
My first post in a project thread:)

Whats the dimension of the control panel and have you done a cad layout yet for the controls? I have quite a bit of design experience and have tracked down some high rez scans of some of the props used in indy, If you have a layout I'd love to throw my hat in to help with some design work (for free of course).

BASS!

  • Just have fun.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 837
  • Last login:August 10, 2013, 03:12:33 am
Re: The ARK Project... Cutting templates
« Reply #39 on: February 21, 2008, 11:23:27 pm »
oh and forgot to post, This coctail is going to be amazing!!!!!!

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project... Cutting templates
« Reply #40 on: February 22, 2008, 03:58:36 am »
Good work bud  :applaud:

Its looking awesome already from the templates alone, keep it up!  :applaud:

Im not normally one for templates either but as you said they are usfull when you want symetrical parts. Ive been using some templates for my CP ends and they have come out spot on.

Looking forward to some more updates.  :)

ErikRuud

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1709
  • Last login:March 05, 2021, 10:20:27 am
  • I'll build a cab for only 99.99.99!!!
    • Erik's humble video game page
Re: The ARK Project... Cutting templates
« Reply #41 on: February 22, 2008, 12:50:23 pm »
This project is looking better all the time. Keep up the good work!

I'd suggest adding a fog machine, but the glycol residue would probably be a problem. :)
Real Life.  Still a poor substitute for video games!       
American Laser Games Wrapper
O2em Rom Utility

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project... Cutting templates
« Reply #42 on: March 02, 2008, 09:34:24 pm »
Well, after one failed attempt and a slight redesign, I have finally finished the templates.  :)  Here's pics of the end and side templates as well as the one for the "wings" which will serve as the sides for the control panels.

The smaller end piece has a hump on each edge around the midsection that will serve as the holder for the carrying poles.  I haven't drilled the holes yet.





« Last Edit: March 03, 2008, 12:01:42 am by somunny »

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project... Templates complete!
« Reply #43 on: March 03, 2008, 10:23:45 am »
 :o

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project... Templates complete!
« Reply #44 on: March 04, 2008, 12:35:03 pm »
:o

 ;D

I'll be cutting the four sides out of 5/8 mdf this weekend.  With any luck, I'll be able to post some pics of the pieces put together to give a better idea of what this thing is going to look like.

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project... Templates complete!
« Reply #45 on: March 04, 2008, 01:11:53 pm »
Careful...  you may need to watch out for raiders of your ark...   >:D

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7901
  • Last login:Yesterday at 10:28:40 am
Re: The ARK Project... Templates complete!
« Reply #46 on: March 04, 2008, 01:51:07 pm »
This thing is going to be so sweet...

Ritalin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 148
  • Last login:May 07, 2015, 12:25:39 am
Re: The ARK Project... Templates complete!
« Reply #47 on: March 08, 2008, 08:36:11 pm »
(I posted this in the Artwork area too, but just in case you wanted it with your project thread)

Using the same/similar compass as uprightbass360, I was thinking of something maybe like this:



This would carry over the plane's path idea with the red lines, and if you added red buttons to this it would look SWEET. The joystick would be in the center of the compass. The country names give the red line an added effect of being the flight path, and you can change the country names to anything you wish.

Just to note, the background image was some stock image that is only 72dpi, so depending on the final size of the layout, I may need to use as alternate background image or re-create it completely.

As for the Raiders logo, I just created that from scratch using a free Raiders font found online. The "R" of that font isn't exact. Thus, if you have the actual Raiders (with gradient) in a high resolution format, let me know and I can replace it.

Let me know what you think, cheers!

-Ritalin


somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project... The art of atomizing MDF
« Reply #48 on: March 08, 2008, 11:08:46 pm »
I was finally able to start cutting out the cabinet pieces today.  Geez!  What a huge freakin' mess routering mdf makes.  Just oblierated into a fine powder.  It's everywhere!  Anyway, I got three of the four sides cut out before the sun started to set.  Still need to cut the last side and do a little clean up on them.  I should have the four sides cut out and test fit tomorrow.





Must be quittin' time.  :)


somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project... and the art of atomizing MDF
« Reply #49 on: March 09, 2008, 09:54:06 pm »
Got the sides slotted and test fit today.  There's a host of minor problems so I'm considering re-cutting all the sides.  I'd rather spend $20 on a sheet of MDF than have an area I can't fix once it's laminated.  I'd be out $200 then.

Overall, I'm really digging the way it came out.





After I got it all put together and took some pics, I went inside and watched Raiders.  Man, I've got Lost Ark fever!   ;D

Ritalin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 148
  • Last login:May 07, 2015, 12:25:39 am
Re: The ARK Project - Cue ARK theme...
« Reply #50 on: March 09, 2008, 09:59:33 pm »
Let me officially go on record and say I love this cab design/theme.
Awesome!

weisshaupt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
  • Last login:August 19, 2021, 04:00:18 pm
    • The Ghost in the Machine Project Thread
Re: The ARK Project... Templates complete!
« Reply #51 on: March 09, 2008, 10:10:46 pm »
(I posted this in the Artwork area too, but just in case you wanted it with your project thread)

This artwork is sweet. (I wouldn't have thought of that in a million years, but its perfect! This thing is going to be so cool...

I Volunteer to be in the first raiding party!


“A government ... cannot have the right of altering itself. If it had, it would be arbitrary. It might make itself what it pleased; and wherever such a right is set up, it shews there is no constitution” - Thomas Paine, Rights of Man

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project... Templates complete!
« Reply #52 on: March 09, 2008, 10:32:53 pm »
I Volunteer to be in the first raiding party!

I know where he lives...   ;)  >:D

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #53 on: March 09, 2008, 11:32:47 pm »
Hmmm...  I may have to invest in some snakes.    ;)

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Cue ARK theme...
« Reply #54 on: March 09, 2008, 11:41:14 pm »
Hmmm...  I may have to invest in some snakes.    ;)

That won't work, we have a pet red-tailed boa.  :)

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7780
  • Last login:February 02, 2024, 01:02:45 pm
  • Worthless button pusher!
Re: The ARK Project - Cue ARK theme...
« Reply #55 on: March 10, 2008, 10:51:25 am »
 :applaud: :applaud: :cheers: :cheers:
Working: Not Enough
Projects: Too Many
Progress: None

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #56 on: March 10, 2008, 05:47:23 pm »
Thanks for the compliments, guys!

I ordered the laminate today and was happily surprised to learn that the brushed gold is about 30% cheaper than the polished version.  $4.16 per square foot.  I ordered two 4x10 sheets.  Total - $360.97.  Less than I was expecting but still  :o

ETA for the laminate is March 19th. 

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7901
  • Last login:Yesterday at 10:28:40 am
Re: The ARK Project - Cue ARK theme...
« Reply #57 on: March 10, 2008, 05:57:02 pm »
Thanks for the compliments, guys!

I ordered the laminate today and was happily surprised to learn that the brushed gold is about 30% cheaper than the polished version.  $4.16 per square foot.  I ordered two 4x10 sheets.  Total - $360.97.  Less than I was expecting but still  :o

ETA for the laminate is March 19th. 

Wow!  $400 for the laminate is pretty serious stuff.  I have to say though that it will be well worth it when you are finished with what has the makings of an awesome and totally unique cab...  Besides, what's a couple of bucks over the long term enjoyment this will bring?   :cheers:

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #58 on: March 10, 2008, 08:21:11 pm »
...what's a couple of bucks over the long term enjoyment this will bring?   

That's my mantra!  ;D

Ritalin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 148
  • Last login:May 07, 2015, 12:25:39 am
Re: The ARK Project - Cue ARK theme...
« Reply #59 on: March 11, 2008, 06:49:47 pm »
Worth every penny as far as I'm concerned.  :applaud:
Can't wait to see more when it's laminated.

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Cue ARK theme...
« Reply #60 on: March 13, 2008, 02:37:52 pm »
 :applaud:

What a great theme!  Totally dig it!  Mr. Jones himself would be most proud.

I just hope it won't make your face melt the first time you fire it up!

Awesome work so far....keep the pics comin

danny_galaga

  • Grand high prophet of the holy noodle.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 8441
  • Last login:Yesterday at 09:42:50 pm
  • because the mail never stops
    • dans cocktail lounge
Re: The ARK Project - Cue ARK theme...
« Reply #61 on: March 14, 2008, 08:48:44 pm »

this is going to be brilliant (",)

quite a conundrum you have with choice of finish though.

oh, and when you're done be careful where you place it...



or you may never see it again...


ROUGHING UP THE SUSPECT SINCE 1981

danny_galaga

  • Grand high prophet of the holy noodle.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 8441
  • Last login:Yesterday at 09:42:50 pm
  • because the mail never stops
    • dans cocktail lounge
Re: The ARK Project - Cue ARK theme...
« Reply #62 on: March 14, 2008, 09:44:17 pm »

ooh, for the attract mode, you could just have it on full contrast, white. that would look pretty sweet in the dark, all the light blasting upwards (",)

would you believe i don't have a copy of raiders? fixing that today...

edit: bugger. its actually gone out of print! but the shops tell me its being re-released in may. hmmm, do i get one off ebay now, or wait and see if the new one has more features...
« Last Edit: March 15, 2008, 02:30:41 am by danny_galaga »


ROUGHING UP THE SUSPECT SINCE 1981

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #63 on: March 15, 2008, 09:56:08 pm »
edit: bugger. its actually gone out of print! but the shops tell me its being re-released in may. hmmm, do i get one off ebay now, or wait and see if the new one has more features...

The new version does have an extra featurette or two.  The movies will also be available individually where before only the trilogy + bonus disc was for sale.  The current versions will be dropping in price (on ebay, at least) here pretty quick, I'd think.


As far as progress on the project is concerned...  Really more like a lack of progress, but no shortage of work to be sure.  I went ahead a re-cut all four sides today and am much happier with the result this time around.  Still not 100% perfect but 99% will have to do.  :)

Tomorrow, I'm going to cut the slots in the sides (accurately, this time  :angry:) and cut the wing pieces out so I can get the control panels going.  I'll post pics of that tomorrow.
« Last Edit: March 16, 2008, 12:23:34 pm by somunny »

dfmaverick

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 343
  • Last login:July 03, 2016, 11:17:27 am
  • I want to build my own arcade controls!
Re: The ARK Project - Cue ARK theme...
« Reply #64 on: March 16, 2008, 12:04:30 pm »
would you believe i don't have a copy of raiders? fixing that today...

edit: bugger. its actually gone out of print! but the shops tell me its being re-released in may. hmmm, do i get one off ebay now, or wait and see if the new one has more features...

If you like cereal, Kelogg's has an offer on specially marked boxes for the Raiders movie. Buy 1 specially marked box and get the movie for something like 12.99with special POP or free with something like 10-12 special POPs from marked Kellogg's boxes. Saw it at the grocery store yesterday.

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Cue ARK theme...
« Reply #65 on: March 16, 2008, 05:08:26 pm »
Looking awesome mate! Really impressive work!

I can understand you doing the panels again. I can see your putting a lot of work and moolah into this so you want it to be as perfect as possible, you will only regret it if you dont so respect to you  :applaud:

Btw, incidentally, the film has just been on over here on BBC3. Had to watch it  :)

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4522
  • Last login:October 22, 2023, 09:14:44 pm
  • Insufficient facts always invite danger.
Re: We have top men working on it right now...
« Reply #66 on: March 19, 2008, 08:59:56 pm »
The dimensions aren't to scale yet and I think this design is too long and narrow but it's a start.
Dude!? All the design work has already been done for you!

Make it a cubit and a half wide and high, and two and a half cubits long. And of course the frame should be made from acacia wood. Additionally, you're the only one allowed to play games on it, and only once a year.    ;)

Haha - good one! I'm surprised no one else commented on that, maybe they don't get it?

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: We have top men working on it right now...
« Reply #67 on: March 20, 2008, 09:57:41 pm »
The dimensions aren't to scale yet and I think this design is too long and narrow but it's a start.
Dude!? All the design work has already been done for you!

Make it a cubit and a half wide and high, and two and a half cubits long. And of course the frame should be made from acacia wood. Additionally, you're the only one allowed to play games on it, and only once a year.    ;)

Haha - good one! I'm surprised no one else commented on that, maybe they don't get it?

I assumed it was info from the Bible, yes?  First and second statements I get.  The third, not so much.

Anyway, on with the update...

Picked up the two 4x10 sheets of brushed gold laminate from Wilsonart today.  80 square feet of golden goodness!  They rolled it up so it was easy to get home.



Now I'm Jonesing to get the pieces laminated!  ;) ;D  With it being Easter weekend, I'm not sure there will be much time for working in the backyard.

billpa

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 250
  • Last login:October 01, 2017, 11:25:31 pm
Re: The ARK Project - Cue ARK theme...
« Reply #68 on: March 20, 2008, 10:46:41 pm »
oooooooooooh shiny!   ;D

Cant wait to see it applied!

BASS!

  • Just have fun.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 837
  • Last login:August 10, 2013, 03:12:33 am
Re: The ARK Project - Cue ARK theme...
« Reply #69 on: March 21, 2008, 03:06:20 am »
Yeah I don't think the missus would like the roar of a router while they are sitting around the dinner table ;). Aw who cares, there is always saturday night :)

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4794
  • Last login:April 10, 2022, 09:48:19 pm
Re: The ARK Project - Cue ARK theme...
« Reply #70 on: March 23, 2008, 09:51:21 pm »
I've been toying with the idea of an Indiana Jones theme for my upright.  I'm a huge fan and with the new movie coming out it seems like good timing.  But after seeing your project I'm not so sure.  Mine might look kinda lame in comparison.  Very original idea! I'm anxious to see the laminate applied.

BTW - The History Channel is running a new documentary on the Ark.  It is a little slow at times but still interesting.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #71 on: March 23, 2008, 11:08:52 pm »
Well, contrary to my lamenting, I was able to find time to work on the Ark this weekend (thanks to my wife for running interference with the house guests  ;)). 

Anyway, the dang laminate has curled up on me and, as you can see,  I had a heck of a time flattening it out for application.



With enough clamps and some strategically placed heavy objects, I was able to get it to lay flat and the wood and laminate were forever wed.  ;D  Beware, there is an inherent problem with trimming this stuff.  The "gold" is actual metal foil attached to the laminate material.  When the router comes into contact with the foil, it is turned into tiny metal bits.  These bits have a habit of making their way underneath the router and gouging up the plastic protective film.  In a few spots, the film has been scraped away completely.  I'll have to remove the film to see if there's any visible damage.  Once I notice this was happening, I took extra care and cleaned the router and wood surface often.  The problem was greatly reduced.

Here's the nearly completely trimmed piece:



Not very exciting with the film still on.  I won't be removing it until both sides have been laminated.

I've been toying with the idea of an Indiana Jones theme for my upright.  I'm a huge fan and with the new movie coming out it seems like good timing.  But after seeing your project I'm not so sure.  Mine might look kinda lame in comparison. 

Pshh...  If I thought like that I would have never built cabinet number one.  Build it.  I'd like to see another IJ inspired project.   :cheers:

mountain

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1205
  • Last login:March 26, 2024, 11:42:28 am
    • Mountain Jukeboxes
Re: The ARK Project - Cue ARK theme...
« Reply #72 on: March 23, 2008, 11:28:42 pm »
Looking good! I hope that you don't find any damage when you remove the film. You might want to try applying masking tape 6" - 8" inside of your cut line. A little extra protection couldn't hurt.

I am anxiously awaiting to see this thing come to life. Very unique design  :cheers:

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #73 on: March 24, 2008, 12:01:56 am »
You might want to try applying masking tape 6" - 8" inside of your cut line. A little extra protection couldn't hurt.

That's a good idea.  I'll do that when I laminate the other side.  The good news is that I can almays make this first side the inside of the piece.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #74 on: March 24, 2008, 12:45:00 am »
wp34,

If you do decide to go with an IJ theme, let me know.  I've been pulling sound effects from the dvd's to use in my front end.

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4794
  • Last login:April 10, 2022, 09:48:19 pm
Re: The ARK Project - Cue ARK theme...
« Reply #75 on: March 24, 2008, 09:57:39 am »
wp34,

If you do decide to go with an IJ theme, let me know.  I've been pulling sound effects from the dvd's to use in my front end.

I appreciate the offer.  I see where you looped the "hum" of the Ark.  That should be really cool.  You could do something with the theme played when they show the Ark on screen (or talk about it as I recall) as well.  Not sure the name but they go back to it when Indy sees the drawing of the Ark in the Venetian underground in Crusade.

Your quote to kick off this thread is great by the way.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #76 on: March 24, 2008, 09:46:50 pm »
Got a box full of gold t-molding (50 ft.) today courtesy of t-molding.com.   :)


HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Cue ARK theme...
« Reply #77 on: March 25, 2008, 07:35:47 am »
 :o

I'm pretty sure your project will fit in the back of my Honda...   >:D

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #78 on: March 25, 2008, 09:13:33 am »
:o

I'm pretty sure your project will fit in the back of my Honda...   >:D

I'd feel a lot safer if you had a BMW.  The Ark hates Germans.  ;)

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7901
  • Last login:Yesterday at 10:28:40 am
Re: The ARK Project - Cue ARK theme...
« Reply #79 on: March 25, 2008, 09:23:12 am »
Got a box full of gold t-molding (50 ft.) today courtesy of t-molding.com.   :)



That is awesome.

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Cue ARK theme...
« Reply #80 on: March 27, 2008, 11:41:17 am »
I'm finding myself checking this project out on a daily basis...Love everything!

Keep up the great work!
« Last Edit: April 01, 2008, 11:29:34 am by Jetson »

Ritalin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 148
  • Last login:May 07, 2015, 12:25:39 am
Re: The ARK Project - Cue ARK theme...
« Reply #81 on: March 28, 2008, 03:36:38 am »
Got a box full of gold t-molding (50 ft.) today courtesy of t-molding.com.   :)


Absolutely sick, I love it!

Please be sure to put a cup holder on there and fabricate a holy grail while you're at it! :D

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #82 on: March 28, 2008, 07:24:23 pm »
I'm finding myself checking this project out on a daily basis...Love everything!

Do you have any plans or pics that you're working from that you can post? 

I would love to see what you have as your concept that you're working towards.

Keep up the great work!

Thanks!  The only design I have is the pic in the very first post.  All the changes have been made on the fly.  I've done the same with my past projects.  I'll start with a basic design and then change it (a little or a lot) as I go along.

Rit, I have a Fertility Idol but, sadly, no grail.   :'(  On a side note, your avatar was interesting enough until I (recently) saw No Country.  Now it just creeps me out.   ;D

This weekend is an "All Ark" weekend.  Pics forthcoming...

Kaytrim

  • I'm too nice a guy
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2095
  • Last login:September 22, 2015, 04:11:30 pm
Re: The ARK Project - Cue ARK theme...
« Reply #83 on: March 28, 2008, 07:53:18 pm »
You have some real Bling going on here.  :dizzy: (pretty, pretty, shiny, shiny) :dizzy: That t-molding is killer.  Can't wait to see what you are able to accomplish this weekend.

TTFN
Kaytrim

IA1NY

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 61
  • Last login:April 17, 2008, 06:32:20 pm
Re: The ARK Project - Cue ARK theme...
« Reply #84 on: March 31, 2008, 02:09:01 pm »
Hey, I just caught your thread in the Artwork section and perused on over.  First I think you've got a great cab going.  Great theme idea.    It looks like you're gonna have one kick-ass cab.  I also like your ideas for the one/two men buttions being written out in the same font as the other lettering.  Before I saw your latest post, though I had a thought that might work out pretty well.  Vector the Indy silhouette in your footer pict and see how that works for the labels.

The other thought that I had while looking in this thread, was about your laminate conundrum.  If you haven't ordered it yet, there is a trick that is used in the scenic art trades for the entertainment industry.  For a cheap gold leaf effect, use the gold "potato" foil that you can get in restaurant supply places.  Use the gold side out, tear off the edges and spray glue it down with something like 3M Super 77.  Burnish it down to create a very flat surface, then seal it with a few coats of clear lacquer.

You will be able to cover T-molding with it so that the panel looks like a solid piece.  The lacquer will protect well and is easy to repair.

Looking forward to seeing more as it progresses! :cheers:

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #85 on: March 31, 2008, 11:12:26 pm »
I managed to get one side piece completly laminated and trimmed over the weekend.  I have another piece laminated on one side waiting to be routered.  This process has been far more time consuming that I had anticipated.  I've used laminate on two other cabinets but the gold needs to be handled somewhat carefully so I'm taking it slow.

I still need to rout the t-mold slot on the laminated piece.  As soon as that is done I'll be able to remove the protective film and take some decent pics.




somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #86 on: April 07, 2008, 11:00:00 am »
More progress, less pics...

I now have both of the longer side pieces completed.  Finished laminating and routing the t-mold slots this past weekend.  I also was able to get the wing pieces cut out using the template I made. 

My focus now has to shift to getting the cp's put together.  I need to have them completed so I can determine the placement on the end pieces before they're laminated.  A couple of admin button holes and a hole for the control wires need to be cut out on the end pieces.  This is much easier to do when you're working with bare wood as opposed to laminated wood.

I also picked up a mobo/proc combo at Fry's last week for the Ark.  It's an Athlon X2 4200+ and an ECS GeForce 6100PM mobo.  Not exactly high performance but it will be more than enough to run what I need it to.  Both items set me back $59.  No too shabby.

Sorry for the lack of pics.  I'll take some this evening and get 'em posted.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #87 on: April 07, 2008, 08:56:57 pm »
Here's some pics:

Side 1 - This stuff is really difficult to photograph adequately.  In person, it shines very well, even through the plastic film.



Matching pair



The control panel wing pieces.  These are going to stick out too far, I think.  I plan to trim two inches off.


Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Cue ARK theme...
« Reply #88 on: April 17, 2008, 01:17:52 pm »
Found this in an email and thought of your project

Plans for the Ark of the Covenant
Exodus 25:1-22

The Ark of the Covenant

They shall make an ark of acacia wood; it shall be two and a half cubits long, a cubit and a half wide, and a cubit and a half high. You shall overlay it with pure gold, inside and outside you shall overlay it, and you shall make a molding of gold upon it all around. You shall cast four rings of gold for it and put them on its four feet, two rings on the one side of it, and two rings on the other side. You shall make poles of acacia wood, and overlay them with gold. And you shall put the poles into the rings on the sides of the ark, by which to carry the ark. The poles shall remain in the rings of the ark; they shall not be taken from it. You shall put into the ark the covenant that I shall give you.

Then you shall make a mercy seat of pure gold; two cubits and a half shall be its length, and a cubit and a half its width. You shall make two cherubim of gold; you shall make them of hammered work, at the two ends of the mercy seat. Make one cherub at the one end, and one cherub at the other; of one piece with the mercy seat you shall make the cherubim at its two ends. The cherubim shall spread out their wings above, overshadowing the mercy seat with their wings. They shall face one to another; the faces of the cherubim shall be turned toward the mercy seat. You shall put the mercy seat on the top of the ark; and in the ark you shall put the covenant that I shall give you. There I will meet with you, and from above the mercy seat, from between the two cherubim that are on the ark of the covenant, I will deliver to you all my commands for the Israelites.

wbassett

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 424
  • Last login:March 12, 2023, 04:34:49 am
Re: The ARK Project - Cue ARK theme...
« Reply #89 on: April 17, 2008, 08:42:33 pm »
EXCELLENT!

I deal with Wilsonart all the time too...  the metals are a bit expensive but it is a great company.  We actually use their laminates for high end Home Theater projector screens!


somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #90 on: April 17, 2008, 09:31:39 pm »
Jetson,

Thanks for posting that.  It's a cool read that I had not seen though bits have been posted in this thread.  :cheers:

EXCELLENT!

I deal with Wilsonart all the time too...  the metals are a bit expensive but it is a great company.  We actually use their laminates for high end Home Theater projector screens!


I do like their stuff.   :)  Out of curiosity, what kind of laminate do you use for a theater screen?

Also, work on the ARK has been a little spotty as of late.  I'm getting ready to show off a great addition to this project from a fellow BYOAC'er.  Details forthcoming...

wbassett

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 424
  • Last login:March 12, 2023, 04:34:49 am
Re: The ARK Project - Cue ARK theme...
« Reply #91 on: April 17, 2008, 10:01:00 pm »
I do like their stuff.   :)  Out of curiosity, what kind of laminate do you use for a theater screen?

Also, work on the ARK has been a little spotty as of late.  I'm getting ready to show off a great addition to this project from a fellow BYOAC'er.  Details forthcoming...

Depends on your setup, for a white screen Designer White, and for a gray screen around the shade of a GrayHawk, Fashion Grey.  Both in the -60 matte finish... and much less expensive than the specialty laminate you're using.

Looking forward to your additions and to see this puppy when it's finished! :)

Jdurg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1127
  • Last login:October 04, 2020, 09:26:27 pm
  • A young guy feeling older than sin......
Re: The ARK Project - Cue ARK theme...
« Reply #92 on: April 23, 2008, 02:12:27 pm »
Man, I can't wait to see this thing completed.  AWESOME job so far!
Donkey Kong High Scores:
1): 49,500
2): 35,600
3): 30,100
4): 29,400
5): 28,200

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Cue ARK theme...
« Reply #93 on: April 25, 2008, 04:34:16 pm »
 :pics   Hope you get some more time soon to work on this.  I know my next cab is at a standstill with all the yardwork I have to get done.  :pics

btw....adding this so you can stay on the front page...lol

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #94 on: April 26, 2008, 01:36:38 am »
Thanks Jetson.  I'll have some kind of update this weekend.  I do have a pic of something to post.  I just have to find the time to do it.

 :cheers:

Jdurg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1127
  • Last login:October 04, 2020, 09:26:27 pm
  • A young guy feeling older than sin......
Re: The ARK Project - Cue ARK theme...
« Reply #95 on: April 26, 2008, 03:26:03 am »
Thanks Jetson.  I'll have some kind of update this weekend.  I do have a pic of something to post.  I just have to find the time to do it.

 :cheers:

Looking forward to it.  Your cab thus far has been INCREDIBLY awesome.  Can't wait to see the finished project.   :cheers:
Donkey Kong High Scores:
1): 49,500
2): 35,600
3): 30,100
4): 29,400
5): 28,200

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Cue ARK theme...
« Reply #96 on: May 16, 2008, 10:29:41 am »
How's it comin?  Haven't seen any updates for a while now.   Hope you get some time to post some progress pics soon.

weisshaupt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
  • Last login:August 19, 2021, 04:00:18 pm
    • The Ghost in the Machine Project Thread
Re: The ARK Project - Cue ARK theme...
« Reply #97 on: May 16, 2008, 06:49:41 pm »
How's it comin?  Haven't seen any updates for a while now.   Hope you get some time to post some progress pics soon.

Second this.. I am reallt looking forward to see the end result .. Its just a brilliant idea, especially since the new movie is coming out :>)
“A government ... cannot have the right of altering itself. If it had, it would be arbitrary. It might make itself what it pleased; and wherever such a right is set up, it shews there is no constitution” - Thomas Paine, Rights of Man

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Cue ARK theme...
« Reply #98 on: May 16, 2008, 10:55:14 pm »
Well, I have been making some progress on the control panels.  Nothing too exciting which is why I haven't posted any pics.

However...!  ;D

One of the reasons I have been working on the cp's is this:







These are polished brass shafts and dust washers, courtesy of Franco B, on Ultimarc 360's.  I have to say that these sticks are quite possibly going to be the coolest feature of this project.  It was his idea to use the polished brass and I couldn't imagine a more perfect fit.

Franco, please take a bow.  You truly are The Man!  :applaud:  :notworthy:


« Last Edit: May 16, 2008, 11:53:39 pm by somunny »

mountain

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1205
  • Last login:March 26, 2024, 11:42:28 am
    • Mountain Jukeboxes
Re: The ARK Project - Behold, the GOLD!
« Reply #99 on: May 16, 2008, 11:41:03 pm »
Wow, those are incredible!

Franco is the Man  :notworthy:

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Behold, the GOLD!
« Reply #100 on: May 17, 2008, 01:20:08 am »
(^_^') Awe, thanks you guys!

They do look nice in the 'flesh' so to speak.

Now get them in that cab!  :)


BUCKETHEAD

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 937
  • Last login:February 27, 2022, 07:48:06 am
  • Don't hate the player .... Hate the Game
Re: The ARK Project - Behold, the GOLD!
« Reply #101 on: May 17, 2008, 06:43:24 am »
Franco B

 :notworthy:

weisshaupt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
  • Last login:August 19, 2021, 04:00:18 pm
    • The Ghost in the Machine Project Thread
Re: The ARK Project - Cue ARK theme...
« Reply #102 on: May 18, 2008, 10:14:43 am »

These are polished brass shafts and dust washers, courtesy of Franco B, on Ultimarc 360's.  I have to say that these sticks are quite possibly going to be the coolest feature of this project.  It was his idea to use the polished brass and I couldn't imagine a more perfect fit.

Franco, please take a bow.  You truly are The Man!  :applaud:  :notworthy:


Franco - That is fantastic! Someone told me I would have a problem getting a cool lighted effect from the 360s-- I guess I know who I should bug if/when I try to do that... Those are SOOO sweet.

Somunny - I think its great you pursued getting such an effect. I can't wait to see this thing completed!
“A government ... cannot have the right of altering itself. If it had, it would be arbitrary. It might make itself what it pleased; and wherever such a right is set up, it shews there is no constitution” - Thomas Paine, Rights of Man

Stub

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 155
  • Last login:Yesterday at 02:42:33 pm
  • Sensory Overload
Re: The ARK Project - Behold, the GOLD!
« Reply #103 on: May 18, 2008, 11:05:13 am »
Can you please show a pic of the wires leaving the base of the stick?

I am interested in how you handled rotation.

Timstuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 648
  • Last login:April 16, 2014, 02:24:29 am
  • I feel asleep !!
Re: The ARK Project - Behold, the GOLD!
« Reply #104 on: May 18, 2008, 03:06:52 pm »
This thing is going to be awesome! But will my face melt if I play it?

weisshaupt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
  • Last login:August 19, 2021, 04:00:18 pm
    • The Ghost in the Machine Project Thread
Re: The ARK Project - Behold, the GOLD!
« Reply #105 on: May 18, 2008, 06:15:12 pm »
Can you please show a pic of the wires leaving the base of the stick?

I am interested in how you handled rotation.

While now defunct (and in trouble) - slikstik used to offer a lighted  ball top. They used a typical mini-plug mono connector at the base to allow the wire to rotate any which way was needed...

“A government ... cannot have the right of altering itself. If it had, it would be arbitrary. It might make itself what it pleased; and wherever such a right is set up, it shews there is no constitution” - Thomas Paine, Rights of Man

Timstuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 648
  • Last login:April 16, 2014, 02:24:29 am
  • I feel asleep !!
Re: The ARK Project - Behold, the GOLD!
« Reply #106 on: May 18, 2008, 08:40:13 pm »
BTW, maybe you've answered this before, but have you considered calling your machine "Raiders of the Lost Arkade?" ;D
« Last Edit: May 18, 2008, 10:03:14 pm by Timstuff »

dmworking247

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 305
  • Last login:February 19, 2024, 01:05:24 am
Re: The ARK Project - Behold, the GOLD!
« Reply #107 on: May 18, 2008, 09:54:24 pm »
You have awesome golden balls Gold Member!

"He had the Midas touch, and he touched it too much... he's Gold Member, he's Gold Member!"

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4522
  • Last login:October 22, 2023, 09:14:44 pm
  • Insufficient facts always invite danger.
Re: The ARK Project - Behold, the GOLD!
« Reply #108 on: May 19, 2008, 12:09:38 am »
Can you please show a pic of the wires leaving the base of the stick?

I am interested in how you handled rotation.

While now defunct (and in trouble) - slikstik used to offer a lighted  ball top. They used a typical mini-plug mono connector at the base to allow the wire to rotate any which way was needed...



Which method you can't do with a U360 stick, due to the magnet on the bottom of the shaft. I'd like to see how you did the wire too. Can you show us some pics of that?

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Behold, the GOLD!
« Reply #109 on: May 19, 2008, 03:58:47 am »
Yeah unfortunately I dont see how you can get round the rotation issue without pretty much re-designing the the stick.

All I did was to mill a 2mm wide slot into the e-clip groove:



The wires then fit into the gap between the ends of the e-clip. I used small gauge wire so that the wires fit snuggly and allows the magnet to fit all the way onto the shaft so it sits at stock height. Obviously brass isn't ferrous and hence inst magnetic so I machined the shafts so that the magnets are a push fit.



Obviously if the joysticks are twisted alot the wire(s) will break. I suppose you could fit some inline connectors that would disconnect before the wires break but you would still have to open the CP to reconnect them. If any one can think of a solution I would like to know  :)

weisshaupt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
  • Last login:August 19, 2021, 04:00:18 pm
    • The Ghost in the Machine Project Thread
Re: The ARK Project - Behold, the GOLD!
« Reply #110 on: May 19, 2008, 06:28:52 am »
If any one can think of a solution I would like to know  :)

You might want to read my post above.. Connecing the LED wires to a standard audio mini jack at the bottom of the shaft allows a miniplug connector to rotate freely - 360 degrees, as many times as someone thought it would be cool.. the wire will never break because it never gets any significant stress on it.. SlikStik was using this design for its lighted ball tops , so for all I know it may be patented, but it sure works nice.
“A government ... cannot have the right of altering itself. If it had, it would be arbitrary. It might make itself what it pleased; and wherever such a right is set up, it shews there is no constitution” - Thomas Paine, Rights of Man

Kaytrim

  • I'm too nice a guy
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2095
  • Last login:September 22, 2015, 04:11:30 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #111 on: May 19, 2008, 10:18:45 am »
If any one can think of a solution I would like to know  :)

You might want to read my post above.. Connecing the LED wires to a standard audio mini jack at the bottom of the shaft allows a miniplug connector to rotate freely - 360 degrees, as many times as someone thought it would be cool.. the wire will never break because it never gets any significant stress on it.. SlikStik was using this design for its lighted ball tops , so for all I know it may be patented, but it sure works nice.

The problem is the magnet and circuit board at the bottom of the stick.  What you are suggesting won't work because these components get in the way.



Looking Good sommuny.
Franco, your skills never cease to amaze.  Cool modification to the stick there.

Stub

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 155
  • Last login:Yesterday at 02:42:33 pm
  • Sensory Overload
Re: The ARK Project - Behold, the GOLD!
« Reply #112 on: May 19, 2008, 11:20:21 am »
Yes but Bender is working on a miniplug with the magnet attached to to back of the plug but. which solves the problem, but I have made on of these myself and I don't have room to install a restricter plate. I do like the feel of the circular restricter.

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Behold, the GOLD!
« Reply #113 on: May 19, 2008, 12:04:13 pm »
I imagine you will have to lower the PCB as the shaft/jack/magnet will be longer than the standard shaft/magnet?

I don't know exactly how the U360s work but you may have to compensate for the extra travel of the magnet due to the increased distance from the pivot.

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Behold, the GOLD!
« Reply #114 on: May 19, 2008, 01:01:49 pm »
Franco...Awesome work!  Truly amazing  :notworthy:

Thanks for the update.  I can't help but think of seeing the finished project due to all of the marketing for the new movie.

Every where I look there's Indiana Jones...and not to mention they've been playing the hell out of the first three movies lately.

Keep up the great work...can't wait to see the completion.  Somunny you're as good as Spielberg building up the excitement...lol

Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Behold, the GOLD!
« Reply #115 on: May 19, 2008, 05:06:29 pm »
Yes but Bender is working on a miniplug with the magnet attached to to back of the plug but. which solves the problem, but I have made on of these myself and I don't have room to install a restricter plate. I do like the feel of the circular restricter.
I imagine you will have to lower the PCB as the shaft/jack/magnet will be longer than the standard shaft/magnet?

I don't know exactly how the U360s work but you may have to compensate for the extra travel of the magnet due to the increased distance from the pivot.


without restrictor

with restrictor

I am working on this. This is not the final but you get the idea, You do have to increase the distance of the PCB to compensate for the mini plug, and with a small modification those SICK, SICKly awesome gold joysticks could be retrofited. The last thing I need for that project are custom shafts and actually I think Franco is going to save the day on that too!
Just Stunning, Stunning, work on those sticks Franco! :notworthy:

Fantastic Project somunny! :applaud:
« Last Edit: May 19, 2008, 07:55:29 pm by Bender »

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Behold, the GOLD!
« Reply #116 on: May 20, 2008, 01:13:53 am »
Nice work bender!

Does the U360 function the same with/without the restrictor plate? Im guessing it doesnt really matter how close the magnet is to the sensor then?

Where did you get your miniplugs from? I was looking for some a while ago but couldnt find anything suitable.

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Behold, the GOLD!
« Reply #117 on: May 20, 2008, 09:56:04 am »
I was thinking if the magnet thing doesn't work out for you, you could use a regular shaft and put a brass sleeve on it instead of using the solid brass shaft.

Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Behold, the GOLD!
« Reply #118 on: May 21, 2008, 09:57:51 am »
Nice work bender!

Does the U360 function the same with/without the restrictor plate? Im guessing it doesnt really matter how close the magnet is to the sensor then?

Where did you get your miniplugs from? I was looking for some a while ago but couldnt find anything suitable.

You do have some play as to how far the magnet should be from the PCB, but in my final design the distance will be the same with or without the restrictor, and the same as the original

I got the mini plugs for a place called vetco the harder part was finding the jack, I'm using  the tiny 2.5mm ones and I could only find either panel mount or PCB mount and they wouldn't fit into the shaft, so I bought some cables and took the jack side out of those. Some are better than others I was able to find one that had a 6mm(outside diameter) jack that works perfectly, unfortunatly it's from radio shack and discontinued. So long story short trying to find a small jack is the trick

Did you find any jacks that would fit in the shaft?
« Last Edit: May 21, 2008, 10:01:00 am by Bender »

Stub

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 155
  • Last login:Yesterday at 02:42:33 pm
  • Sensory Overload
Re: The ARK Project - Behold, the GOLD!
« Reply #119 on: May 21, 2008, 11:53:04 am »
At around having the magnet an inch away from the pcb ( in center position ) it seems to lose tracking at the outside of its travel. We should be able to compensate for different distances by creating custom restrictor profiles.

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7780
  • Last login:February 02, 2024, 01:02:45 pm
  • Worthless button pusher!
Re: The ARK Project - Behold, the GOLD!
« Reply #120 on: May 21, 2008, 12:13:17 pm »
Wow!

 :notworthy: :notworthy:

 :applaud:
Working: Not Enough
Projects: Too Many
Progress: None

Stub

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 155
  • Last login:Yesterday at 02:42:33 pm
  • Sensory Overload
Re: The ARK Project - Behold, the GOLD!
« Reply #121 on: May 21, 2008, 02:18:47 pm »
I tested with a 3.5mm 2 conductor plug. A 90 deg plug of what looks to be aluminum. I nabbed it from my buddy's shop and I cant find anything like it on line.

He has a guitar repair and restoration shop and also does amp repair. I am going to look in his paper audio parts catalogs. They are half the size of a sears catalog and a lot of things in there I cant find on line.

Also I never got the test to fully work. I was testing the magnet mainly. I never drilled my shaft all the way end to end.

arcadefever

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 795
  • Last login:June 03, 2009, 09:45:05 pm
  • Miami Beach Florida
Re: The ARK Project - Behold, the GOLD!
« Reply #122 on: May 22, 2008, 12:22:25 pm »
 :o

What a great project ! I just read the 5 pages, what a journey  :notworthy:

SUPERBE  :applaud:

Jakobud

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1940
  • Last login:March 11, 2024, 04:45:38 am
Re: The ARK Project - Behold, the GOLD!
« Reply #123 on: May 22, 2008, 03:44:24 pm »
This is going to be very interesting and unique.  Looking forward to seeing the finished project.

amadama

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 201
  • Last login:September 29, 2019, 04:44:52 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #124 on: May 23, 2008, 09:43:16 pm »
Wow, this is freakin' awesome! Keep up the great work!
Alex

Santoro

  • Purveyor of Shiny Arcade Goodness
  • Santoro
  • Trade Count: (+32)
  • Full Member
  • *
  • Offline Offline
  • Posts: 3051
  • Last login:December 23, 2023, 07:05:04 pm
  • Boycott Quarters!!!
    • ArcadeReplay!
Re: The ARK Project - Behold, the GOLD!
« Reply #125 on: May 24, 2008, 07:23:24 pm »
Awesome.  Nothing else to say really. 

I can't wait to see the finished product.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #126 on: May 24, 2008, 09:26:08 pm »
Thanks everyone.  I'm really stoked about the sticks and have been dilligently working on the cp's.  I'll have the holes drilled tomorrow and hopefully have one of them mocked up.  I should be able to post some new pics tomorrow evening.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #127 on: May 28, 2008, 11:17:26 pm »
I was able to get the cp tops put together and drilled over the weekend.  I still need to install the t-nuts for the joysticks and prime them.  I've pretty much settled on a cpo so I'll be putting in my order shortly.




BASS!

  • Just have fun.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 837
  • Last login:August 10, 2013, 03:12:33 am
Re: The ARK Project - Behold, the GOLD!
« Reply #128 on: May 29, 2008, 12:19:15 am »
I'm so happy about your progress. This is by far my favorite movie, next to star wars, and is equally my most anticipated project on the forums atm. Anything I can help ya with somunny id be happy to.

Timstuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 648
  • Last login:April 16, 2014, 02:24:29 am
  • I feel asleep !!
Re: The ARK Project - Behold, the GOLD!
« Reply #129 on: May 30, 2008, 11:32:21 pm »
So, have you put any thought into how you'll handle the cherubs on top?

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4522
  • Last login:October 22, 2023, 09:14:44 pm
  • Insufficient facts always invite danger.
Re: The ARK Project - Behold, the GOLD!
« Reply #130 on: May 31, 2008, 12:35:07 am »
Did both panels need what looks to be Player 1 and 2 buttons? Normally most cocktails only have it on one side - or do you plan to do something different with the player 2 side?

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7906
  • Last login:March 19, 2024, 06:19:27 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #131 on: May 31, 2008, 01:09:39 am »
Did both panels need what looks to be Player 1 and 2 buttons? Normally most cocktails only have it on one side - or do you plan to do something different with the player 2 side?

Oh! Good question...

Lets hear it somunny!  :)

BASS!

  • Just have fun.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 837
  • Last login:August 10, 2013, 03:12:33 am
Re: The ARK Project - Behold, the GOLD!
« Reply #132 on: May 31, 2008, 01:29:57 am »
just a wild guess but I think its just a start 1 and Coin 1

Timstuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 648
  • Last login:April 16, 2014, 02:24:29 am
  • I feel asleep !!
Re: The ARK Project - Behold, the GOLD!
« Reply #133 on: May 31, 2008, 02:02:16 am »
That'd have been my guess as well.

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4522
  • Last login:October 22, 2023, 09:14:44 pm
  • Insufficient facts always invite danger.
Re: The ARK Project - Behold, the GOLD!
« Reply #134 on: May 31, 2008, 02:33:48 am »
Then how do you select a 2 player game?

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #135 on: May 31, 2008, 03:49:54 pm »
Hmmm...

Well, I hope I haven't bunged this up but my intent was to have a player coin and a player start on each side.  Will that not work?  I'm thinking that player 2 can start his own game.  In hidsight, I suppose I didn't need a coin button on that side...  Oh well, it makes the cpo design easier.  ;)

Damn all your critical eyes!  :angry: ;D

BASS!

  • Just have fun.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 837
  • Last login:August 10, 2013, 03:12:33 am
Re: The ARK Project - Behold, the GOLD!
« Reply #136 on: May 31, 2008, 08:54:35 pm »
Bah who cares, I think its a fine concept, player 2 should be able to start their own game.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #137 on: May 31, 2008, 09:55:01 pm »
Here's a couple of pics of the cp semi put together:




Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4522
  • Last login:October 22, 2023, 09:14:44 pm
  • Insufficient facts always invite danger.
Re: The ARK Project - Behold, the GOLD!
« Reply #138 on: May 31, 2008, 11:55:00 pm »
Remember the 6 P rule:

Proper Planning Prevents Piss Poor Performance!

 :cheers:

arcadefever

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 795
  • Last login:June 03, 2009, 09:45:05 pm
  • Miami Beach Florida
Re: The ARK Project - Behold, the GOLD!
« Reply #139 on: June 01, 2008, 12:10:14 am »
Quote
Proper Planning Prevents Piss Poor Performance!

 :applaud:

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #140 on: June 01, 2008, 12:27:52 am »
Remember the 6 P rule:

Proper Planning Prevents Piss Poor Performance!

 :cheers:

My high school football coach used to preach that mantra (20 years ago!).  So...  I think I might have missed your point there.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7906
  • Last login:March 19, 2024, 06:19:27 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #141 on: June 01, 2008, 12:59:54 am »
Very cool. That should be more than enough support to hold up the CP's.

miles2912

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 706
  • Last login:October 31, 2019, 05:30:24 pm
  • My first Home Game. Fairchild System F.
Re: The ARK Project - Behold, the GOLD!
« Reply #142 on: June 02, 2008, 10:35:11 pm »
What a great theme and idea.  It all just works.  Can't wait to see the final build!
  Scratch built upright MAME Cab

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7906
  • Last login:March 19, 2024, 06:19:27 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #143 on: June 02, 2008, 11:23:35 pm »
I have player 1 and player 2 on one side because I use an Ipac and to exit out of the games I press player 1 and player 2 at the same time.

You going to have admin buttons somewhere?

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #144 on: June 02, 2008, 11:46:48 pm »
You going to have admin buttons somewhere?

I'm planning to have an escape and pause on player one's side.  I'm going to mount them on the side of the cabinet facing the player, one on each side of the cp.  There's about two inches clearance on each side so the buttons will be mostly hidden from view and out of the way of accidental pressing.

The cp's really aren't much to look at yet and I can't finish the laminate until I have the overlays completed (working on finishing them up now).

Can't wait to see the final build!

That makes two of us!  ;)

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Behold, the GOLD!
« Reply #145 on: June 03, 2008, 01:05:16 am »
Good work as always buddy :)

If you want to plug the extra holes its easy enough to do (I had an extra three holes in my vertical CPs so I win that one!  :P  :)) I just used some high performance wood filler to plug the holes and then sanded them flush.

Keep up the good work  :applaud:

thatitalian

  • Don't worry about the chicken, I feed my friends human all the time...
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 887
  • Last login:March 27, 2018, 10:52:37 am
  • The Revolution Is Coming...
Re: The ARK Project - Behold, the GOLD!
« Reply #146 on: June 03, 2008, 09:43:58 am »
OK OK. Here is the ball...........

WHAM!

Somunny just whacked it out of the park!

What a theme! What a project! Great innovation! This is why I come back and back and back to this forum. There is just no limit on what can be achieved!

miles2912

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 706
  • Last login:October 31, 2019, 05:30:24 pm
  • My first Home Game. Fairchild System F.
Re: The ARK Project - Behold, the GOLD!
« Reply #147 on: June 03, 2008, 05:25:10 pm »
The 2 most used buttons on my cab are the credit button (gets presses a lot - and I mean a LOT).  Second is pause - cell rings and it sure is handy.  If you only have 2 buttons I might think about putting the esc button on a shifted key.  Just a thought ...


Miles

ps.  Had to pop in raiders last night and watch it again after reading this thread!
  Scratch built upright MAME Cab

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #148 on: June 03, 2008, 11:07:11 pm »
If you only have 2 buttons I might think about putting the esc button on a shifted key.  Just a thought ...

That's how I have it on the first machine I built.  I also have a dedicated esc key on the 3/4 scale machine I built for my son.  I think I like the dedicated key best.  The additional buttons won't be very noticeable where I'm planning to put them.

Thanks for the encouragement, everyone!  :)

Ummon

  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5244
  • Last login:June 09, 2010, 06:37:18 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #149 on: June 05, 2008, 09:56:57 pm »
If any one can think of a solution I would like to know  :)

You might want to read my post above.. Connecing the LED wires to a standard audio mini jack at the bottom of the shaft allows a miniplug connector to rotate freely - 360 degrees, as many times as someone thought it would be cool.. the wire will never break because it never gets any significant stress on it.. SlikStik was using this design for its lighted ball tops , so for all I know it may be patented, but it sure works nice.

The problem is the magnet and circuit board at the bottom of the stick.  What you are suggesting won't work because these components get in the way.

Since there's a slot in the shaft, perhaps there could be a slot in the base around it and  then a small rod screwed in to lock it in. The wires can come out through the rod. Of course next time around, rounded and tapped slots might be optimal.
« Last Edit: June 05, 2008, 10:00:06 pm by Ummon »
Yo. Chocolate.


"Theoretical physics has been the most successful and cost-effective in all of science."

Stephen Hawking


People often confuse expressed observations with complaint, ridicule, or - even worse - self-pity.

brock.sampson

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 379
  • Last login:May 31, 2018, 10:11:41 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #150 on: June 05, 2008, 10:28:42 pm »
You should abandon this project and make a Kingdom of the Crystal Skull cabinet instead. ;)  Looks amazing keep up the good work.  I have to stop looking at the projects page it fills my head with too many ideas.
DOC! YOU HAVE A TABLE OVER THERE WITH A SIGN THAT SAYS, "LASER DEATH RAY BARGAIN BIN!"

thefuture

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • Last login:February 09, 2016, 11:40:31 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #151 on: June 06, 2008, 09:23:03 am »
You should abandon this project and make a Kingdom of the Crystal Skull cabinet instead. ;)  Looks amazing keep up the good work.  I have to stop looking at the projects page it fills my head with too many ideas.

If you do decide to abandon it, please send me the unfinished pieces!

mcfreak

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 282
  • Last login:March 01, 2021, 01:55:04 pm
  • Asteroids moving along...
    • Hobby Blog
Re: The ARK Project - Behold, the GOLD!
« Reply #152 on: June 07, 2008, 09:38:41 am »
You should abandon this project and make a Kingdom of the Crystal Skull cabinet instead. ;)  Looks amazing keep up the good work.  I have to stop looking at the projects page it fills my head with too many ideas.

Or he could abandon it and make a Dude Where's my Car theme while we are picking bad movies to theme after.  Even ToD is better than Crystal Skulls.

Raiders is great and still holds up today, the kids love it...

Favorite quote:
Indiana: Give me the whip.
Satipo: Throw me the idol. No time to argue. Throw me idol, I'll throw you the whip.
Indiana: [throws the idol] Give me the whip.
Satipo: Adiós, señor.

Speaking of that, you should integrate a real bull whip on the side of the cabinet and get yourself an Indy hat you can keep on top when you arn't using the machine...  Like Indy was just there playing and forgot his hat...  ;)

Ummon

  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5244
  • Last login:June 09, 2010, 06:37:18 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #153 on: June 07, 2008, 05:59:48 pm »


Favorite quote:
Indiana: Give me the whip.
Satipo: Throw me the idol. No time to argue. Throw me idol, I'll throw you the whip.
Indiana: [throws the idol] Give me the whip.
Satipo: Adiós, señor.


"....plane...boat...anything."
"What are you going to do, Indy?"
"I'm going after that truck."
"How?"
"I dunno...I'm making it up as I go."

Or

"SALA."
"....OH, my good friend....I am so glad you are not dead!"
« Last Edit: June 07, 2008, 06:07:12 pm by Ummon »
Yo. Chocolate.


"Theoretical physics has been the most successful and cost-effective in all of science."

Stephen Hawking


People often confuse expressed observations with complaint, ridicule, or - even worse - self-pity.

Timstuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 648
  • Last login:April 16, 2014, 02:24:29 am
  • I feel asleep !!
Re: The ARK Project - Behold, the GOLD!
« Reply #154 on: June 14, 2008, 01:55:28 am »
NEDE MOAR PIX plz :pics

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4522
  • Last login:October 22, 2023, 09:14:44 pm
  • Insufficient facts always invite danger.
Re: The ARK Project - Behold, the GOLD!
« Reply #155 on: June 14, 2008, 02:21:09 am »
And finish already!

 ;D

miles2912

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 706
  • Last login:October 31, 2019, 05:30:24 pm
  • My first Home Game. Fairchild System F.
Re: The ARK Project - Behold, the GOLD!
« Reply #156 on: June 21, 2008, 07:03:08 pm »
Yes plz.  More progress and pix!!


  :)
  Scratch built upright MAME Cab

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #157 on: June 21, 2008, 10:28:05 pm »
Well, it's been to dang hot to work outside so I've been finishing up the control panel overlays.  I hope to have them done this weekend and then off to the printer!

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #158 on: June 22, 2008, 05:36:10 pm »
So, these control panel overlays are prtty close to final.  I haven't decided which way to go as far as the "button circles" go, but I'm leaning toward NO.  I'm also thinking about doing away with the P2 coin button and patching it up.  Opinions?

Player One, no circles.  I added the subtext to "player One" on a whim, but I like it.



Player Two, with circles.  I think it makes it a little too busy.



Player Two, no coin button, no circles.


leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7906
  • Last login:March 19, 2024, 06:19:27 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #159 on: June 22, 2008, 08:05:16 pm »
looks good. I like it with the circles, but I might go for the no circles just to make applying the art easier.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #160 on: June 22, 2008, 09:08:16 pm »
looks good. I like it with the circles, but I might go for the no circles just to make applying the art easier.

Yeah, I've been on the bad side of that situation.   Easy is good.   :)

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Behold, the GOLD!
« Reply #161 on: June 23, 2008, 06:38:22 am »
looks good. I like it with the circles, but I might go for the no circles just to make applying the art easier.

Same here.

What buttons are you using by the way.

I do love the CP art though, there gonna look sweeeeet  8)

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #162 on: June 23, 2008, 09:19:14 am »

What buttons are you using by the way.

I do love the CP art though, there gonna look sweeeeet  8)

Thanks!

I'm planning on using translucent - yellow, orange and red.  Lit up, of course.

Kaytrim

  • I'm too nice a guy
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2095
  • Last login:September 22, 2015, 04:11:30 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #163 on: June 23, 2008, 11:08:55 am »
I'd keep the coin button for player two.  Some games need the separate coin signal.  Otherwise go without the circles.

weisshaupt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
  • Last login:August 19, 2021, 04:00:18 pm
    • The Ghost in the Machine Project Thread
Re: The ARK Project - Behold, the GOLD!
« Reply #164 on: June 25, 2008, 11:16:38 am »
I must say, I miss the red  Map lines/circles you had in the original concepts..

I would suspect if you showed one of the map scenes from the movie (sans music) they would immediately know it was Raiders.. they are iconic..





“A government ... cannot have the right of altering itself. If it had, it would be arbitrary. It might make itself what it pleased; and wherever such a right is set up, it shews there is no constitution” - Thomas Paine, Rights of Man

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #165 on: June 25, 2008, 07:27:26 pm »
I must say, I miss the red  Map lines/circles you had in the original concepts..

I would suspect if you showed one of the map scenes from the movie (sans music) they would immediately know it was Raiders.. they are iconic..

I felt that the map-based designs with the travel lines, airplanes and the like, were getting too complicated so I decided to go with a much more simple design.  It was a tough choice as I had already put in a ton of time in on those designs but, in the end, I think it was the right one.

I suppose we'll see once I get it all together...

weisshaupt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
  • Last login:August 19, 2021, 04:00:18 pm
    • The Ghost in the Machine Project Thread
Re: The ARK Project - Behold, the GOLD!
« Reply #166 on: June 27, 2008, 09:41:31 am »
I felt that the map-based designs with the travel lines, airplanes and the like, were getting too complicated so I decided to go with a much more simple design.  It was a tough choice as I had already put in a ton of time in on those designs but, in the end, I think it was the right one.

I suppose we'll see once I get it all together...

The designs you have now look awesome - and they will certainly be easier to implement.  I was just partial to the other ones (especially since I was not doing the work)  Keep up the great work- this thing is going to be soo cool when you are done..
“A government ... cannot have the right of altering itself. If it had, it would be arbitrary. It might make itself what it pleased; and wherever such a right is set up, it shews there is no constitution” - Thomas Paine, Rights of Man

Ed_McCarron

  • Nothing worse than Picard issuing the self destruct order and the next thing you know it your apartment blows up.
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2404
  • Last login:June 20, 2022, 02:33:39 pm
  • Get your mind out of the gutter. THIS is a dongle.
Re: The ARK Project - Behold, the GOLD!
« Reply #167 on: June 28, 2008, 10:19:32 pm »
Speaking of that, you should integrate a real bull whip on the side of the cabinet and get yourself an Indy hat you can keep on top when you arn't using the machine...  Like Indy was just there playing and forgot his hat...  ;)

Indy NEVER forgets his hat.
But wasn't it fun to think you won the lottery, just for a second there???

Timstuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 648
  • Last login:April 16, 2014, 02:24:29 am
  • I feel asleep !!
Re: The ARK Project - Behold, the GOLD!
« Reply #168 on: June 29, 2008, 01:34:05 am »
Speaking of that, you should integrate a real bull whip on the side of the cabinet and get yourself an Indy hat you can keep on top when you arn't using the machine...  Like Indy was just there playing and forgot his hat...  ;)

Indy NEVER forgets his hat.

Does Indy never forget his hat... or does the HAT never forget HIM? :o

rockin_rick

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 495
  • Last login:May 27, 2017, 09:20:20 am
Re: The ARK Project - Behold, the GOLD!
« Reply #169 on: June 30, 2008, 12:48:13 am »
Hi,

Cool project, can't wait to see it done.

As for the CP, maybe you could go without the button rings on the CPO (for ease of install), and kinda get the look by replacing the button housings/bezels with black housings, and have your translucent colored button plungers.  Sorta like the Wizard of Wor CP (pic attached).

Rick
If I do not respond to your post in a timely manner, feel free to PM me.

Timstuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 648
  • Last login:April 16, 2014, 02:24:29 am
  • I feel asleep !!
Re: The ARK Project - Behold, the GOLD!
« Reply #170 on: June 30, 2008, 12:58:28 am »
The thing about "guide rings" on the CPO, is IMO they're kind of useless at the end of the day. Unless you cut out your button holes absolutely perfectly on the MDF, there's a high probability that the "guide rings" aren't even going to line up spot-on anyway. It's for this reason that I also advocate cutting plexiglass overlays using a flush-trim router bit rather than a circle saw-- it's better to assume that your button holes are slightly off and base everything on the holes in the wood, than it is to cut everything around the original exact plan.

newkillergenius

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 426
  • Last login:September 21, 2013, 03:48:35 pm
  • A mind is a terrible thing to taste.
    • The Mystery Revealed!
Re: The ARK Project - Behold, the GOLD!
« Reply #171 on: August 01, 2008, 03:07:36 pm »
So...........how's it coming?   :cheers:



Don't ---steaming pile of meadow muffin--- where you eat, my friend.

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Behold, the GOLD!
« Reply #172 on: August 01, 2008, 05:37:16 pm »
So...........how's it coming?   :cheers:

Too hot to work on it here in AZ

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #173 on: September 09, 2008, 07:47:50 pm »
Well, it's almost time to get outside and go back to work on this monstrosity.

I've posted my "final" cpo designs here but I recently picked this up on ebay and was thinking what a cool cpo background it would make.

Opinions?


Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Behold, the GOLD!
« Reply #174 on: September 09, 2008, 08:22:22 pm »
That print is an amazing find! :applaud:
you HAVE to incorporate that somewhere on/in the cab

can't wait till you get back to work on this
I've been Jonesn' for some updates (sad pun, I Know, but I just couldn't help myself)

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #175 on: September 09, 2008, 11:31:23 pm »
That print is an amazing find! :applaud:
you HAVE to incorporate that somewhere on/in the cab

can't wait till you get back to work on this
I've been Jonesn' for some updates (sad pun, I Know, but I just couldn't help myself)

Yeah, I know.  Back to the drawing board.   :-\ ;D

The prints were sold on ebay by McQuarrie's website.  I think they were limited though I don't know the number.

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Behold, the GOLD!
« Reply #176 on: September 10, 2008, 03:44:32 pm »
Glad to see the train is rolling again.  Looking forward to the complete. 

Love that print too...that would make an awesome background....very fitting

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38211
  • Last login:October 19, 2022, 12:01:54 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #177 on: September 10, 2008, 05:09:13 pm »
Whoa.  That print will really put this thing over the top.  Try scanning it as a true two colour b/w image.  Then you can take that and use a vector tracer or maybe by hand with the magic wand in Illustrator to get something you can scale for CP or blackline art.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #178 on: September 10, 2008, 08:41:47 pm »
That's exactly what I did today.  Here's portion of the image that I scanned to a 600dpi b&w pdf (would there be a better image format for something like this?).



Here's screen caps of the picture from the movie.  I remembered that the beams emitting from the ark were yellow but I didn't realize there was this much coloring done to the image.





I may try coloring it though, admittedly, this is not my strong suit.  If anyone thinks they'd like to have a go at giving the pic a screen accurate color job, let me know and I'll send you the full scan.

I've put quite a bit of work into my other cpo designs but I really think this is the image I need.

Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Behold, the GOLD!
« Reply #179 on: September 11, 2008, 12:22:21 am »
send me a scan
I'll play with it and see what I can come up with
no grantees though :)


Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Behold, the GOLD!
« Reply #180 on: September 11, 2008, 02:57:33 am »
Sweeeeeeet  8)

As you know I still have your U360's buddy. I will get them sent out to you soon. As your not in a rush for them I thought I would hold on to them to sort out this tangle free solution. Ive got all the hardware and I have come up with a solution. Im going to get a prototype made shortly and then ill make you a pair of brass shafts with the audio jacks in. Hope thats ok bud, sorry for hanging onto them for so long.

Just a bit of proof I am actually doing something!:





ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38211
  • Last login:October 19, 2022, 12:01:54 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #181 on: September 11, 2008, 09:13:15 am »
That's exactly what I did today.  Here's portion of the image that I scanned to a 600dpi b&w pdf (would there be a better image format for something like this?).


Really depends on your final objective... but I'd probably scan it higher than 600dpi.  That will make it easier for the vector generators or magic wand to get accurate straight lines with less oddness you have to clean up.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #182 on: September 11, 2008, 09:23:30 am »
Sweeeeeeet  8)

As you know I still have your U360's buddy. I will get them sent out to you soon. As your not in a rush for them I thought I would hold on to them to sort out this tangle free solution. Ive got all the hardware and I have come up with a solution. Im going to get a prototype made shortly and then ill make you a pair of brass shafts with the audio jacks in. Hope thats ok bud, sorry for hanging onto them for so long.

Just a bit of proof I am actually doing something!:






Hey, at least someone's been busy this summer!  ;)  No problem, Franco.  It looks like it's going to be incredible!

Kaytrim

  • I'm too nice a guy
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2095
  • Last login:September 22, 2015, 04:11:30 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #183 on: September 11, 2008, 10:37:20 am »



That is just too cool Franco.  Sent you a PM.

somunny this is going to be one heck of a machine when you get it completed.  Glad to see you back in action.

TTFN
Kaytrim

Spyridon

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1480
  • Last login:April 30, 2021, 02:47:05 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #184 on: September 11, 2008, 01:47:06 pm »
Not sure how I missed this therad originally, but just read through it all.  Fantastic idea and it looks like it is coming along nicely. 

 :applaud: :applaud: :applaud:
My current collection:  Arkanoid^3, Asteroids Deluxe, Centipede, Donkey Kong w/DIIK, Frenzy w/Berzerk multi, Galaga, Galaxian, Gyruss, Mappy,  Missile Command, Multi-Williams, O'Boyles Arcade (Mame), Pac-man,  Sinistar, Star Wars, Tempest, War Gods

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #185 on: September 11, 2008, 03:23:28 pm »
That's exactly what I did today.  Here's portion of the image that I scanned to a 600dpi b&w pdf (would there be a better image format for something like this?).


Really depends on your final objective... but I'd probably scan it higher than 600dpi.  That will make it easier for the vector generators or magic wand to get accurate straight lines with less oddness you have to clean up.

I'm not sure if the scanner I have access to will scan above 600dpi but I'll look into it.

Not sure how I missed this therad originally, but just read through it all.  Fantastic idea and it looks like it is coming along nicely. 

 :applaud: :applaud: :applaud:

Thanks!  I appreciate the encouragement from all of the members here.  It's a great motivator.  :)

koolmoecraig

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1433
  • Last login:April 05, 2014, 07:07:20 pm
    • My Intervention
Re: The ARK Project - Behold, the GOLD!
« Reply #186 on: September 29, 2008, 11:53:23 pm »
Looks pretty sweet.

You gotta set your screen saver to be that mass of swirling clouds with blue lightning underneath like the final scene in Raiders.  That would look awesome!

I'm restoring an Indiana Jones pinball machine right now in the "pinball" area of these boards.  Unfortunately the only thing that I can do to "ark" that out is to brass plate all of the metal.

Nice work.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #187 on: October 06, 2008, 10:37:18 pm »
"An army which carries the Ark before it...  is invincible."

Got a pm from Waveryder last week in which he expressed interest in adding color to the sketch/print of the Ark from Jones's big ol' school book.  Well, as you can see, he kicked some major ass on it.



The result speaks for itself but I have to give a big public 'Thank you!' to Waveryder.  He treated it as if he were putting it on his own cabinet and I couldn't ask for more than that.  Thanks again, man.

Next, I'll be incorporating the image into my cpo's (I'm on about the 4th or 5th iteration, I think).  This will be the final cpo re-design.  So as soon as I'm done, it's off to the printers.  Stay tuned...
« Last Edit: October 07, 2008, 01:03:10 am by somunny »

Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Behold, the GOLD!
« Reply #188 on: October 07, 2008, 08:55:44 am »
Damn that is AWSOME!

Nice work Waveryder!

I'd love to know how you got those wartercolor effects in Photoshop

Kaytrim

  • I'm too nice a guy
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2095
  • Last login:September 22, 2015, 04:11:30 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #189 on: October 07, 2008, 08:57:12 am »
Damn that is AWSOME!

Nice work Waveryder!


DITTO!!!! 

lettuce

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1900
  • Last login:December 31, 2021, 01:46:10 pm
  • Make It So!
Re: The ARK Project - Behold, the GOLD!
« Reply #190 on: October 07, 2008, 12:20:11 pm »
Damn that is AWSOME!

Nice work Waveryder!


DITTO!!!! 


Same Again, his doing some designs for me atm, and his work is fantastic  :applaud:

waveryder

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 585
  • Last login:July 14, 2011, 04:26:17 am
  • I Troop, therefore I am
    • BubbleGum Custom Art
Re: The ARK Project - Behold, the GOLD!
« Reply #191 on: October 07, 2008, 02:20:41 pm »
Don't want to distract from the amazing cabinet on this thread but thanks for the kudos and a big thanks to somunny for letting me paint this piece for him. Its great to see a project that really is "custom" and that pushes the boundries of what we think a arcade cab should look like.  :cheers:
When pixelated clipart just wont do, just call for Betty

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7901
  • Last login:Yesterday at 10:28:40 am
Re: The ARK Project - Behold, the GOLD!
« Reply #192 on: October 07, 2008, 03:18:29 pm »
Don't want to distract from the amazing cabinet on this thread but thanks for the kudos and a big thanks to somunny for letting me paint this piece for him. Its great to see a project that really is "custom" and that pushes the boundries of what we think a arcade cab should look like.  :cheers:

I agree.  This cab is turning out great.  Sick job on the art waveryder, as usual.   :cheers:

padstack

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 265
  • Last login:February 03, 2024, 12:54:24 pm
  • I want to build my own arcade controls!
Re: The ARK Project - Behold, the GOLD!
« Reply #193 on: November 01, 2008, 11:40:33 pm »
I'm jonesing for an update!  Any progress?

Definitely the most watched cab on here for me!

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Behold, the GOLD!
« Reply #194 on: November 02, 2008, 09:26:53 am »
I'm jonesing for an update!  Any progress?

Definitely the most watched cab on here for me!

I stole the ark from him...

I used Simon as a distraction...   (My 7ft red-tailed boa)

miles2912

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 706
  • Last login:October 31, 2019, 05:30:24 pm
  • My first Home Game. Fairchild System F.
Re: The ARK Project - Behold, the GOLD!
« Reply #195 on: November 09, 2008, 02:35:27 pm »
More ark plz. 
  Scratch built upright MAME Cab

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Behold, the GOLD!
« Reply #196 on: November 21, 2008, 05:08:39 pm »
 :burgerking: I'm just gonna stand here at your door looking creepy until you post more pics  :burgerking:

Kaytrim

  • I'm too nice a guy
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2095
  • Last login:September 22, 2015, 04:11:30 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #197 on: November 21, 2008, 05:37:02 pm »
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:

Think I'll join you.   :laugh2:

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #198 on: November 21, 2008, 06:06:50 pm »
 :laugh2:

I've had too many pressing houshold projects (outdoor & attic) that built up over the summer to do anything on the Ark.  Thankfully, there's a light at the end of the tunnel and it looks like this weekend I'll be able to finish up that crap so I get back to what's important!  ;)

Seriously though, I've been dreading seeing this thread bumped back to the top knowing I'd have to do some 'splainin' about what a slacker I've been.  ;D

Kaytrim

  • I'm too nice a guy
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2095
  • Last login:September 22, 2015, 04:11:30 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #199 on: November 21, 2008, 06:21:29 pm »
somonny, I've been a slacker too for the same reasons as you. :'(  You are welcome to crash my thread some time as well.  ;)

BASS!

  • Just have fun.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 837
  • Last login:August 10, 2013, 03:12:33 am
Re: The ARK Project - Behold, the GOLD!
« Reply #200 on: November 21, 2008, 06:40:57 pm »
So does that mean if we post here youll end up feeling guilty enough to finish your machine for us? ;D

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #201 on: November 21, 2008, 07:17:32 pm »
That's pretty much it.  :)

XeviouS

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • Last login:March 11, 2016, 08:38:20 am
    • Noah's Arkade
Re: The ARK Project - Behold, the GOLD!
« Reply #202 on: November 22, 2008, 12:21:51 am »
When you finish this project and turn it on for the first time, a thousand ghost like creatures are going to swarm from the screen and consume the flesh of everyone who is watching. I think the wisest thing to do would be to warehouse your project......... :scared

SNAAKE

  • Trade Count: (+29)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3546
  • Last login:January 11, 2024, 12:21:50 pm
  • my joystick is bigger than your joystick !
Re: The ARK Project - Behold, the GOLD!
« Reply #203 on: November 26, 2008, 03:23:46 pm »
:burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:
 :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking: :burgerking:

Think I'll join you.   :laugh2:

"wake up....with the king"

that might be the gayest ad EVER. its seriously disturbing  :laugh2:

system01

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 283
  • Last login:March 04, 2023, 08:06:55 pm
  • System Idle Processes are the Devil's Playthings
Re: The ARK Project - Behold, the GOLD!
« Reply #204 on: November 27, 2008, 10:15:10 pm »

SpamGuy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:July 02, 2009, 09:17:19 am
  • Fighting terror with Jay Leno since 19Dickety2
Re: The ARK Project - Behold, the GOLD!
« Reply #205 on: December 03, 2008, 12:43:18 pm »
Bumping this thread up.

I'm jonesing here for some updates.

/begin creepiness
 :burgerking:
/end creepiness

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Behold, the GOLD!
« Reply #206 on: December 22, 2008, 10:21:58 am »
Just when you thought it was safe....

Kaytrim

  • I'm too nice a guy
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2095
  • Last login:September 22, 2015, 04:11:30 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #207 on: December 22, 2008, 10:44:15 am »
That is just too creepy. :scared :scared :scared :scared :scared

SpamGuy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:July 02, 2009, 09:17:19 am
  • Fighting terror with Jay Leno since 19Dickety2
Re: The ARK Project - Behold, the GOLD!
« Reply #208 on: December 22, 2008, 01:07:44 pm »
Because of that picture, this smiley :pics should be forever removed.

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Behold, the GOLD!
« Reply #209 on: December 22, 2008, 01:33:12 pm »
You should see the website this came from...I will have nightmares for weeks.  Its promoting their cologne that smells like flame broiled whoppers.

Please SoMunny...can we have some Arkcade update pics for Xmas???

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #210 on: December 22, 2008, 08:56:31 pm »
Please SoMunny...can we have some Arkcade update pics for Xmas???

I've made a small bit of progress.  I'll try and get a pic tomorrow.   I'll also work on getting the final cpo designs up.

Unfortunately, I had some problems with the laminate.  I'm going to need to pony up for two new sheets to the tune of about $350.  It's kinda taken the wind out of my sails.   :P

Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Behold, the GOLD!
« Reply #211 on: December 22, 2008, 10:59:44 pm »
oh man I'm so sorry, that sucks!!

buck up though, a project of this magnitude is bound to have a couple setbacks
I'm working on a very small project and I can't believe how many set backs I've had
one cost me just about what that laminate cost you

when you feel up to it let us know what went wrong with the laminate, let me guess... it had something to do with bending it?  That stuff can be pretty tricky to work with
I remember on Mountain's first cab he had a laminate disaster too, but man did that thing turn out fantastic in the end!

keep at, I know I'm not the only one waiting to see some updates on this build

« Last Edit: December 22, 2008, 11:07:26 pm by Bender »

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #212 on: December 23, 2008, 10:43:28 am »

when you feel up to it let us know what went wrong with the laminate, let me guess... it had something to do with bending it?  That stuff can be pretty tricky to work with


Ding, ding!  You're exactly right.  That suff has some memory and once it's been rolled, it's like working with spring steel.  The stuff will snap before it flattens.  Oh well, won't make that mistake again...

Anyway here's the cpo's.  My one question is;  should I go with the text for the Start and Coin buttons or leave it out.  I'm thinking that leaving it out will reduce the possibility of problems lining everthing up.  Opinions?





Again, big thanks to Waveryder for all his work and to everyone who offered to help.  :notworthy:

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Behold, the GOLD!
« Reply #213 on: December 23, 2008, 10:57:11 am »
I'd leave it out.  If truly necessary, you could add some sort of vinyl label to the button itself.

Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Behold, the GOLD!
« Reply #214 on: December 23, 2008, 11:06:54 am »
I'd leave it out.  If truly necessary, you could add some sort of vinyl label to the button itself.

Ditto!



when you feel up to it let us know what went wrong with the laminate, let me guess... it had something to do with bending it?  That stuff can be pretty tricky to work with


Ding, ding!  You're exactly right.  That suff has some memory and once it's been rolled, it's like working with spring steel.  The stuff will snap before it flattens.  Oh well, won't make that mistake again...



yeah, the only way to even try to bend that stuff is with the thinner vertical kind and a lot of time with a heat gun. Trying to get the shape pretty close before you apply the contact cement and then still it's a crap shoot


Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Behold, the GOLD!
« Reply #215 on: December 23, 2008, 11:49:23 am »
Looks better without

SpamGuy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:July 02, 2009, 09:17:19 am
  • Fighting terror with Jay Leno since 19Dickety2
Re: The ARK Project - Behold, the GOLD!
« Reply #216 on: December 23, 2008, 03:05:17 pm »
I'd leave it out.  If truly necessary, you could add some sort of vinyl label to the button itself.

Completely agree here as well.

The text below the buttons really doesn't add anything to the CPO.  If anything it takes away from the incredible design behind it.

XeviouS

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • Last login:March 11, 2016, 08:38:20 am
    • Noah's Arkade
Re: The ARK Project - Behold, the GOLD!
« Reply #217 on: December 23, 2008, 05:27:10 pm »

I love the way the "coin" and "start" logo's contrast to the horrific death imagery. You must leave them there! >:D

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #218 on: January 11, 2009, 05:50:34 pm »
I was able to make some progress today.  Got the other two "wing" pieces trimmed.  I have to laminate the inboard side of one more before I can start putting the second control panel together.  I attached one control panel to take some measurements and mocked up the progress so far.





The cpo's are ready to send to the printer.  I think that will be my next step.

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Behold, the GOLD!
« Reply #219 on: January 11, 2009, 08:41:25 pm »
Damn, that is awesome!  Nice work!  :o

padstack

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 265
  • Last login:February 03, 2024, 12:54:24 pm
  • I want to build my own arcade controls!
Re: The ARK Project - Behold, the GOLD!
« Reply #220 on: February 01, 2009, 12:47:27 am »
Any updates?  This is definitely my most anticipated cab.  Absolutely genius so far.

subedriver

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 91
  • Last login:June 27, 2009, 02:19:05 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #221 on: February 19, 2009, 04:45:38 pm »
yes please update this!

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Behold, the GOLD!
« Reply #222 on: February 19, 2009, 04:58:10 pm »
I'm not really helping matters, I still need to get somunny's U360s sent out. I PROMISE I'll get them sent out on monday. Sorry I've been dragging my heels, things have just been manic the last couple of months  :-[

thatitalian

  • Don't worry about the chicken, I feed my friends human all the time...
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 887
  • Last login:March 27, 2018, 10:52:37 am
  • The Revolution Is Coming...
Re: The ARK Project - Behold, the GOLD!
« Reply #223 on: February 21, 2009, 09:51:56 am »
Seriously, imagine this when it is completed! This will looks so bonkers it is unreal! The innovation is simply astounding!

The 80s Man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 125
  • Last login:March 21, 2019, 03:20:56 pm
  • I'm working on a Crystal Castles MAME Cab
Re: The ARK Project - Behold, the GOLD!
« Reply #224 on: March 03, 2009, 10:32:02 pm »
This is one of the most anticipated arcade projects ever. If you only watch one person's progress this year, make it this one.    Over at Big Bad Toy Store you might find some Indiana items that you might like.    http://www.bigbadtoystore.com/bbts/search.aspx?search=gentle+indiana
Over Four Years and I'm still under 150 Posts (Date Registered:  January 27, 2005, 10:17:25 PM )

Kaytrim

  • I'm too nice a guy
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2095
  • Last login:September 22, 2015, 04:11:30 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #225 on: March 10, 2009, 10:22:59 am »
Don't make me bring out Mr. Creepy........... :burgerking:

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38211
  • Last login:October 19, 2022, 12:01:54 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #226 on: March 16, 2009, 12:44:13 pm »

I've had issues with laminate that has been rolled too long, too.  Big sheets are definitely troublesome.  I've found that some have so much spring that you pretty much have to waste as much as you use... when the contact cement is ready just slap a way oversized piece down, cut most of the excess, and then route the rest.  Costly but with some of the pieces I've done it was the only way.

What are you going to do on some of those inner corners where laminated edges are going to meet at 90 degrees?  I'm thinking where the decorated trim pieces meet.  There could end up being a slight gap there that most would not see but may bug you as the builder.

padstack

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 265
  • Last login:February 03, 2024, 12:54:24 pm
  • I want to build my own arcade controls!
Re: The ARK Project - Behold, the GOLD!
« Reply #227 on: March 25, 2009, 05:15:46 pm »
lack of updates may cause small babies to cry...  :)

fixedpigs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 627
  • Last login:June 05, 2022, 04:56:10 pm
  • warning: drew can't handle my avatar...
Re: The ARK Project - Behold, the GOLD!
« Reply #228 on: March 25, 2009, 08:15:30 pm »
lack of updates may cause small babies to cry...  :)

may...?

system01

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 283
  • Last login:March 04, 2023, 08:06:55 pm
  • System Idle Processes are the Devil's Playthings
Re: The ARK Project - Behold, the GOLD!
« Reply #229 on: March 25, 2009, 10:28:43 pm »
   all wait and no update mmmakes system a dull boy all wait and no update makes system a dull boy all wait and no update mkes system a dull boy all wait and no update makes system a dull boy boy all wait and no update makes system a dull boy all wait and no update makes system a dull boy
   all wait and no update makes system a dull boy
   all wiat and no update make system a dull boy
   all wait and and no update makes system a dull boy
   all wait and no updateee makes system a dull boy
   all wait and no update makes system a dull boy
   all wait and no update makes system a dull boy all wait and no update makes system a dull boy
   all wait and no update makss system a dull boy

   all wait and no uppdate makes system a dull boy all wait and no update makes system a dull boy

all wait and and no update makes system a dull boy dull boy all wait and no update makes system a dull boy all wait and no update makes system a dull boy all wait and no update makes systemm a dull boy

Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Behold, the GOLD!
« Reply #230 on: March 26, 2009, 11:02:51 am »
no time for Love Dr. Jones

get to work!

Just kidding, I haven't updated mine in awhile either

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38211
  • Last login:October 19, 2022, 12:01:54 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #231 on: March 26, 2009, 12:51:50 pm »
[youtube]http://www.youtube.com/watch?v=lUkt5XEN1IE[/youtube]

 :afro:

dstone

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 176
  • Last login:January 14, 2021, 01:03:52 pm
    • Vectorcade
Re: The ARK Project - Behold, the GOLD!
« Reply #232 on: March 26, 2009, 11:50:54 pm »
I'm going to have to go get that game, now.  :D

Hornpipe2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 82
  • Last login:December 07, 2014, 02:09:52 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #233 on: March 27, 2009, 11:54:12 am »
I wish this project had gotten off the ground:
http://forum.arcadecontrols.com/index.php?topic=82868.0

Jetson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 22, 2019, 03:12:19 pm
  • Anger is our real enemy
Re: The ARK Project - Behold, the GOLD!
« Reply #234 on: April 21, 2009, 03:24:13 pm »
Did this project meet an untimely demise?   ???

Spyridon

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1480
  • Last login:April 30, 2021, 02:47:05 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #235 on: April 23, 2009, 12:53:18 pm »
Did this project meet an untimely demise?   ???

I think the builder made the mistake of opening the ark!

My current collection:  Arkanoid^3, Asteroids Deluxe, Centipede, Donkey Kong w/DIIK, Frenzy w/Berzerk multi, Galaga, Galaxian, Gyruss, Mappy,  Missile Command, Multi-Williams, O'Boyles Arcade (Mame), Pac-man,  Sinistar, Star Wars, Tempest, War Gods

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Behold, the GOLD!
« Reply #236 on: April 23, 2009, 02:02:48 pm »
Maybe the same thing happened when he opened his package with the polished brass U360s I sent him ;D

I know he was waiting on them so I hope he will post some more Indy goodness soon.  :)

I forgot to mention, I found my old Indiana Jones and the Lost Ark hardback comic when I moved house, I didn't know if it would be useful to you if I scanned any of the pages?




drventure

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4152
  • Last login:June 25, 2023, 02:23:57 pm
  • Laser Death Ray Bargain Bin! Make me an offer!
Re: The ARK Project - Behold, the GOLD!
« Reply #237 on: April 23, 2009, 03:44:17 pm »
Polished brass u360's? Now I'm really wanting to see this project come together.


somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #238 on: May 03, 2009, 08:40:21 pm »
Well, I really appreciate the interest in the project and it has motivated me to get it back on track.  I finally had Scott at Mame Marquees print out the P1 and P2 overlays and I got my U360's in the mail with the polished brass shafts (also wired for lighting) from Franco B.  Major props to hime for the awesome job as well as Waveryder for the work he did coloring the McQuarrie Ark Bible sketch.

So here's the progress on the player one cp so far...

I added the t-nuts for the U360's



Bondo'd and sanded - I also ended up filling one of the admin button holes on the P2 cp



Applied the P1 cpo and installed the U360





I haven't decided whether to use all translucent yellow buttons or a combination of yellow, orange, red.  I wish Happ made brown.  I'd like those for the admin buttons.  So there it is...


I forgot to mention, I found my old Indiana Jones and the Lost Ark hardback comic when I moved house, I didn't know if it would be useful to you if I scanned any of the pages?


That looked so cool I went ahead and picked one up on ebay!  Thanks again for the sticks Franco.  They really are beautiful!

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Behold, the GOLD!
« Reply #239 on: May 04, 2009, 07:39:45 am »
 :applaud: :applaud: :applaud: :cheers:

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38211
  • Last login:October 19, 2022, 12:01:54 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #240 on: May 04, 2009, 08:22:16 am »
I wish Happ made brown. 


That might be the first time anyone has ever said that!

drventure

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4152
  • Last login:June 25, 2023, 02:23:57 pm
  • Laser Death Ray Bargain Bin! Make me an offer!
Re: The ARK Project - Behold, the GOLD!
« Reply #241 on: May 04, 2009, 10:45:40 am »
Looks like you got brass plate on the inside areas of the cp? Are you planning on doing more of the cab like that or just those inside panels?

Either way, it's looking really good :applaud:

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #242 on: May 06, 2009, 12:12:28 am »
Looks like you got brass plate on the inside areas of the cp? Are you planning on doing more of the cab like that or just those inside panels?

Either way, it's looking really good :applaud:

Thanks Dr.!

If you're referring to what I think you're referring to, the entire unit will be laminated in the same gold "Metalaminate".

What are you going to do on some of those inner corners where laminated edges are going to meet at 90 degrees?  I'm thinking where the decorated trim pieces meet.  There could end up being a slight gap there that most would not see but may bug you as the builder.

You may be right about this (the gap, that is.  You're definitely right that it will bother me if it's there.  :)).  I won't know for sure until I get the other two sides laminated.

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: The ARK Project - Behold, the GOLD!
« Reply #243 on: May 06, 2009, 02:54:30 am »
Quote

It's nice to see them installed  :afro: The artwork looks awesome, bet you are happy with that!

Have you tried lighting the LEDs yet? I used clear bubble tops in the previous pics, I would like to see them with your yellow bubble tops. I bet they will cast a nice glow over your artwork :)

boogieman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 141
  • Last login:January 19, 2019, 05:35:48 pm
  • advancedspuds.com
    • advancedspuds - your source for spudgun information
Re: The ARK Project - Behold, the GOLD!
« Reply #244 on: June 23, 2009, 11:12:12 pm »
<awkward silence>
 :burgerking:
</awkward silence>

Any updates?  Love the CP artwork, it turned out great!

padstack

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 265
  • Last login:February 03, 2024, 12:54:24 pm
  • I want to build my own arcade controls!
Re: The ARK Project - Behold, the GOLD!
« Reply #245 on: July 07, 2009, 03:26:24 pm »
updates! updates updates!  :)

Benevolance

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 602
  • Last login:August 10, 2019, 03:13:59 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #246 on: July 07, 2009, 03:36:25 pm »
This project is fantastic and I want to see it finished. *nudge nudge*

On a clearly unrelated note, the Canadian mint misplaces about 15 million dollars of boullion just as somunny is covering his cocktail cabinet in gold. Sure, he says it's just metalaminate, but it looks a little too good if you ask me. Mere coincidence, or the perfect cover story...?

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4522
  • Last login:October 22, 2023, 09:14:44 pm
  • Insufficient facts always invite danger.
Re: The ARK Project - Behold, the GOLD!
« Reply #247 on: July 08, 2009, 11:57:36 pm »
Flame on!

Can't get into that control panel artwork - a picture of people suffering and dying. Great idea.  :dunno

Pinball Wizard

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • Last login:June 04, 2021, 03:47:13 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #248 on: July 09, 2009, 07:27:13 am »
I have to to say, the gold is got to be a different approach. I personally like different but I am not much of a cocktail person in  the first place much less a that color on one.
Where's my gold star :P

system01

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 283
  • Last login:March 04, 2023, 08:06:55 pm
  • System Idle Processes are the Devil's Playthings
Re: The ARK Project - Behold, the GOLD!
« Reply #249 on: July 19, 2009, 01:37:10 am »
Where's the progress?!?

Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Behold, the GOLD!
« Reply #250 on: July 19, 2009, 05:40:11 pm »
Flame on!

Can't get into that control panel artwork - a picture of people suffering and dying. Great idea.  :dunno

Aren't thoes the bad guy's dying?....
ummm....... video games and the bad guys dying works for me :)

kronic24601

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 285
  • Last login:June 24, 2014, 03:08:54 pm
  • Evil Arcade Monkey Strikes Again!
Re: The ARK Project - Behold, the GOLD!
« Reply #251 on: August 06, 2009, 11:50:04 am »
Well ... I guess it depends on if you were Jewish or not. Notice there are no German Nazi's in that photo, not guns & rocket launchers. It's swords, spears, and shields. Historically the Jewish Nation would take the Ark with them to battles and such (although they never pop-ed the top to destroy their enemies or anything). I'm Jewish myself, so I don't feel to bad for those guys ... But I don't know that I would call them "Bad Guys", unless you were a Jew yourself. (reading wayyy too much into this ...) All the same, love the artwork.

Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Behold, the GOLD!
« Reply #252 on: August 06, 2009, 06:26:27 pm »
what.....

a robot can't be Jewish? ;)

system01

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 283
  • Last login:March 04, 2023, 08:06:55 pm
  • System Idle Processes are the Devil's Playthings
Re: The ARK Project - Behold, the GOLD!
« Reply #253 on: August 16, 2009, 06:32:51 pm »
what.....

a robot can't be Jewish? ;)

Pffff, It's called Druish!
 :laugh2:

kronic24601

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 285
  • Last login:June 24, 2014, 03:08:54 pm
  • Evil Arcade Monkey Strikes Again!
Re: The ARK Project - Behold, the GOLD!
« Reply #254 on: September 17, 2009, 03:06:04 pm »
Actually, for the SouthPark viewers there ARE.

but they are called Jewbots...

EightBySix

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 523
  • Last login:April 25, 2021, 01:50:16 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #255 on: September 30, 2009, 07:53:24 am »
New here, but I feel compelled to point out an obvious design flaw... Surely, you'll have to close your eyes whilst playing it, or it'll kill you!

Seriously though - that's an amazing concept!

Mr.Ian

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:August 21, 2013, 09:28:37 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #256 on: February 25, 2010, 03:19:42 am »
Please, Im hanging for an update on this masterpiece

XeviouS

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • Last login:March 11, 2016, 08:38:20 am
    • Noah's Arkade
Re: The ARK Project - Behold, the GOLD!
« Reply #257 on: February 25, 2010, 08:07:06 am »

Please, Im hanging for an update on this masterpiece


It was too dangerous - I think it ended up in storage  :scared


Timstuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 648
  • Last login:April 16, 2014, 02:24:29 am
  • I feel asleep !!
Re: The ARK Project - Behold, the GOLD!
« Reply #258 on: March 12, 2010, 06:49:29 pm »
I want an update! It's been forever, and we're still waiting to see this thing covered in lovely gold laminate and T-molding! :cry:

uolarethian

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 100
  • Last login:October 22, 2021, 11:09:53 pm
  • Should I eat'em or what?
Re: The ARK Project - Behold, the GOLD!
« Reply #259 on: May 18, 2010, 03:43:29 pm »
Any updates on this project?  I really hope the "Top Men" didn't get ahold of this one.

R0UNDEYEZ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
  • Last login:March 16, 2015, 03:39:15 am
Re: The ARK Project - Behold, the GOLD!
« Reply #260 on: May 18, 2010, 04:52:08 pm »
This is the first time I've come across this project, pretty incredible so far. Was it ever finished? I know how responsibilities of "real life" tend to put these sort of projects on hold (especially since i read earlier in the thread he dropped almost 300 on laminate he ended up spoiling and had to replace)  anyway, I just wanted to congratulate you on what you have shared this far.It looks amazing.

deepblue

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:December 12, 2018, 07:39:28 pm
  • Billy vs. Steve
Re: The ARK Project - Behold, the GOLD!
« Reply #261 on: August 03, 2010, 02:04:03 pm »
Bumping this up as it's one of my hands down favorite projects. As someone who is 2+ years deep in my own cab, I know how these things can be on again, off again...but UPDATE PLEASE! :)

Thanks.

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Behold, the GOLD!
« Reply #262 on: August 20, 2010, 08:22:30 am »
Bumping this up as it's one of my hands down favorite projects. As someone who is 2+ years deep in my own cab, I know how these things can be on again, off again...but UPDATE PLEASE! :)

I am calling the OP out.  Somunny visited the site on August 4, 2010 (yes, DAYS AGO) and didn't update this thread?  OMG, dude.  Do you have any idea how many people are hanging on this one???  What's up?

opt2not

  • Trade Count: (+15)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:February 15, 2024, 07:31:21 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #263 on: August 20, 2010, 02:17:15 pm »
Bumping this up as it's one of my hands down favorite projects. As someone who is 2+ years deep in my own cab, I know how these things can be on again, off again...but UPDATE PLEASE! :)

I am calling the OP out.  Somunny visited the site on August 4, 2010 (yes, DAYS AGO) and didn't update this thread?  OMG, dude.  Do you have any idea how many people are hanging on this one???  What's up?
I'm sure the guy has been busy with life...these projects aren't streamlined productions, so there are delays. No need to stalk the dude.

I also don't get why you're calling out people to finish their projects when you haven't even started yours...just saying.

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Behold, the GOLD!
« Reply #264 on: August 20, 2010, 02:18:57 pm »
somunny's dead.  He's locked in my basement. 

opt2not

  • Trade Count: (+15)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:February 15, 2024, 07:31:21 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #265 on: August 20, 2010, 02:21:48 pm »
Does he fit down there?

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Behold, the GOLD!
« Reply #266 on: August 20, 2010, 02:30:54 pm »
Does he fit down there?

Zing!

After I installed the code for noisy, yes, yes he did.

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Behold, the GOLD!
« Reply #267 on: August 20, 2010, 02:36:35 pm »
I'm sure the guy has been busy with life...these projects aren't streamlined productions, so there are delays. No need to stalk the dude.

If I was stalking him, I'd PM him a bunch of times, show up at his house, etc. etc.  Or send some Germans for the Ark.  I'm just interested, that's all.  Usually, when I check the threads with no replies after months, I find that the OP hasn't been around either.  In this case, I noted he'd been online recently, and thought it was odd that there wasn't an update to what is, in all respects, an epic build.  Even a 'life has been kicking my butt' is more than helpful.

 ;D

I also don't get why you're calling out people to finish their projects when you haven't even started yours...just saying.

Ouch, dude.  Harsh.

 ;)

If my Wife would let me start, I would start.  Right now, cash is tough, and other projects are on the go.  (I'd like at least ONE of my bathrooms to be 100% functional, personally.)  I can, of course, plan and ramp up, and my home PC is all ready to go...  So far.  There's always stuff to do.

 :D

Roo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 99
  • Last login:October 15, 2010, 09:17:03 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #268 on: August 20, 2010, 03:56:25 pm »
I'm really glad y'all decided to raise this post from the dead.  I had never seen it before, and I'm glad I have.  What a great concept!!!

I hope he returns to finish it!

Santoro

  • Purveyor of Shiny Arcade Goodness
  • Santoro
  • Trade Count: (+32)
  • Full Member
  • *
  • Offline Offline
  • Posts: 3051
  • Last login:December 23, 2023, 07:05:04 pm
  • Boycott Quarters!!!
    • ArcadeReplay!
Re: The ARK Project - Behold, the GOLD!
« Reply #269 on: August 24, 2010, 08:43:23 pm »
Does he fit down there?

Zing!

After I installed the code for noisy, yes, yes he did.

Wait, confused. :)

Stingray

  • Official Slacker - I promise to try a lot less
  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10463
  • Last login:April 08, 2021, 03:43:54 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #270 on: August 24, 2010, 08:51:32 pm »
Wait, confused. :)

Happens to most people your age.

-S
Stingray you magnificent bastard!
This place is dead lately.  Stingray scare everyone off?

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Behold, the GOLD!
« Reply #271 on: August 24, 2010, 08:52:24 pm »
Happens to most people your age.

GET OFF MY LAWN!!!

 :laugh:

Santoro

  • Purveyor of Shiny Arcade Goodness
  • Santoro
  • Trade Count: (+32)
  • Full Member
  • *
  • Offline Offline
  • Posts: 3051
  • Last login:December 23, 2023, 07:05:04 pm
  • Boycott Quarters!!!
    • ArcadeReplay!
Re: The ARK Project - Behold, the GOLD!
« Reply #272 on: August 25, 2010, 03:06:38 pm »
Wait, confused. :)

Happens to most people your age.

-S

I'm honored that you broke a four month posting lull just to take a jab at me  :)

Also, I'm not old damnit!

jtslade

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 746
  • Last login:January 11, 2023, 11:34:45 am
  • Keep it looking originallish!
Re: The ARK Project - Behold, the GOLD!
« Reply #273 on: August 25, 2010, 05:39:04 pm »
this needs a bump every hour on the hour. I'm on the other side of the world so I can help with the bumps over here to keep this thread at the top of the heap...


Raiders of the Lost Arcade..


Speaking of old, did anyone else here see Raiders of the Lost Ark.. In the theater.. If so how many times.. I drug my dad six times to see it and the face melting Nazi scene scared the ---steaming pile of meadow muffin--- out of me..
Ms. Pacman Original Cocktail with Non destructive mod to Groovy Arcade Linux with All 4way Vertical Cocktail capable 2 button or less games.


Neo Geo MVS Mame Cab Running Hyperspin, 25" Nanao Arcade Monitor, Mini-pac, ATI Radeon HD 4850 (ATOM-15), IL 8 Way Euro-Sticks from Paradise Arcade, Win XP 64bit, and tons of other junk.


deepblue

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:December 12, 2018, 07:39:28 pm
  • Billy vs. Steve
Re: The ARK Project - Behold, the GOLD!
« Reply #274 on: August 25, 2010, 05:58:03 pm »
Speaking of old, did anyone else here see Raiders of the Lost Ark.. In the theater.. If so how many times.. I drug my dad six times to see it and the face melting Nazi scene scared the ---steaming pile of meadow muffin--- out of me..

I saw it in theaters a bunch of times - always loved Indiana Jones, partly why i dug this thread up :)

opt2not

  • Trade Count: (+15)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:February 15, 2024, 07:31:21 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #275 on: August 25, 2010, 06:48:27 pm »
Speaking of old, did anyone else here see Raiders of the Lost Ark.. In the theater.. If so how many times.. I drug my dad six times to see it and the face melting Nazi scene scared the ---steaming pile of meadow muffin--- out of me..
I was drugged while watching it in the theater too.  Wait, what?  :lol

XNIF

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 133
  • Last login:January 18, 2017, 04:40:32 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #276 on: August 27, 2010, 02:40:08 am »
this needs a bump every hour on the hour. I'm on the other side of the world so I can help with the bumps over here to keep this thread at the top of the heap...

bumb..

maybe someone who knows him "for real"  should contact him, saying that his fanbase is getting angry!   :D

Spyridon

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1480
  • Last login:April 30, 2021, 02:47:05 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #277 on: August 30, 2010, 09:30:10 am »

Speaking of old, did anyone else here see Raiders of the Lost Ark.. In the theater.. If so how many times.. I drug my dad six times to see it and the face melting Nazi scene scared the ---steaming pile of meadow muffin--- out of me..


I went three days in a row to see it at the Drive-In when it was out.  Yeah, they still had those back then.

---back on topic:

Nice work on this and a great idea.  Hope it gets finished at some point.
My current collection:  Arkanoid^3, Asteroids Deluxe, Centipede, Donkey Kong w/DIIK, Frenzy w/Berzerk multi, Galaga, Galaxian, Gyruss, Mappy,  Missile Command, Multi-Williams, O'Boyles Arcade (Mame), Pac-man,  Sinistar, Star Wars, Tempest, War Gods

XeviouS

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • Last login:March 11, 2016, 08:38:20 am
    • Noah's Arkade
Re: The ARK Project - Behold, the GOLD!
« Reply #278 on: September 04, 2010, 07:05:44 am »
maybe someone who knows him "for real"  should contact him, saying that his fanbase is getting angry!   :D

The guy might be dead for all we know, is there any next of kin here that can confirm yay or nay?

XNIF

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 133
  • Last login:January 18, 2017, 04:40:32 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #279 on: September 08, 2010, 07:11:18 am »
maybe someone who knows him "for real"  should contact him, saying that his fanbase is getting angry!   :D

The guy might be dead for all we know, is there any next of kin here that can confirm yay or nay?

Do not think he is very dead:

Last Active:  September 03, 2010, 09:52:16 AM

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Behold, the GOLD!
« Reply #280 on: September 08, 2010, 10:36:23 am »
maybe someone who knows him "for real"  should contact him, saying that his fanbase is getting angry!   :D

The guy might be dead for all we know, is there any next of kin here that can confirm yay or nay?

Do not think he is very dead:

Last Active:  September 03, 2010, 09:52:16 AM

That's just me.  Before I killed him, I tortured him for his BYOAC login...  >:D

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Behold, the GOLD!
« Reply #281 on: November 26, 2010, 04:07:19 pm »
Just giving this my bi-monthly bumping.  Where are we on this one?

 :'(

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10327
  • Last login:March 27, 2024, 07:37:53 pm
  • boom
    • Arcade Madness
Re: The ARK Project - Behold, the GOLD!
« Reply #282 on: November 27, 2010, 04:23:06 pm »
Just giving this my bi-monthly bumping.  Where are we on this one?

 :'(

I keep telling you...  he's dead, locked in my basement loft...

Benevolance

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 602
  • Last login:August 10, 2019, 03:13:59 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #283 on: November 27, 2010, 07:03:35 pm »
Maybe he built this Ark a little too well, and when he opened it back up again to tinker with some wiring, it had turned into the real Ark of the Covenant and it melted his face off? That would be pretty embarassing and righteously awesome at the same time.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7906
  • Last login:March 19, 2024, 06:19:27 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #284 on: November 27, 2010, 11:07:00 pm »
I know what happened, and you'll all be surprised to learn that ...

Weird, I think I hear someone else here at this late hour. It sounds like they are headed straight for my offi

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Behold, the GOLD!
« Reply #285 on: November 27, 2010, 11:13:18 pm »
I know what happened, and you'll all be surprised to learn that ...

Weird, I think I hear someone else here at this late hour. It sounds like they are headed straight for my offi

Hmm. I think Lew was visited by ... Top .. Men.

newmanfamilyvlogs

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1694
  • Last login:June 15, 2022, 05:20:38 pm
    • forum.arcadecontrols.com/index.php/topic,103584.msg1096585.html#msg1096585
    • Newman Family Vlogs
Re: The ARK Project - Behold, the GOLD!
« Reply #286 on: November 28, 2010, 07:16:26 am »
Or candlejack

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Behold, the GOLD!
« Reply #287 on: November 28, 2010, 07:42:37 am »
Or candlejack

You're kidding. You know Candle Jack doesn't take you unless you SAY his name. I don't thi --

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Behold, the GOLD!
« Reply #288 on: December 13, 2010, 12:30:38 am »
So much for those "top men", eh?  Those lazy asses haven't done anything in months!   ;D

I think it's finally time to get this back on track.  Unfortunately, I'm going to have to re-cut the long sides and buy an additional 80 square feet of laminate to replace what was ruined.

My biggest hurdle this week will be getting the shed cleaned out and organised so I can get to work.

Thanks for the interest, everyone!


Pinball Wizard

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • Last login:June 04, 2021, 03:47:13 pm
Re: The ARK Project - Lost? Not yet!
« Reply #289 on: December 13, 2010, 05:36:34 am »
What happened to have it ruined?
Where's my gold star :P

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Behold, the GOLD!
« Reply #290 on: December 13, 2010, 08:14:47 am »
So much for those "top men", eh?  Those lazy asses haven't done anything in months!   ;D

The Prodigal Son returns!!!

 :applaud:

We've been waiting for you, Doctor Jones!  Can't wait to see more progress!

emphatic

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2008
  • Last login:Yesterday at 05:12:09 pm
  • -"Suck it, Donny!" -"No, YOU suck it.... more".
    • Emphatic's Video Game Collection
Re: The ARK Project - Lost? Not yet!
« Reply #291 on: December 13, 2010, 08:30:04 am »
 :applaud: to the coming back.  :cheers:

jipp

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 282
  • Last login:April 01, 2016, 07:29:49 pm
Re: The ARK Project - Lost? Not yet!
« Reply #292 on: December 13, 2010, 12:28:38 pm »
welcome back.. i see you are in the arizona desert..  like me..  its the perfect time to start working on the arc again. look forward to your progress. :D

chris.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:Yesterday at 10:58:57 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: The ARK Project - Lost? Not yet!
« Reply #293 on: December 13, 2010, 03:20:58 pm »
Do it before Thursday, though. We might get some rain by then! However, I'm enjoying the mild winter.
***Build what you dig, bro. Build what you dig.***

jipp

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 282
  • Last login:April 01, 2016, 07:29:49 pm
Re: The ARK Project - Lost? Not yet!
« Reply #294 on: December 13, 2010, 03:37:41 pm »
ooo thanks for the heads up on rain. ill go put the christmas lights timer under some cover.  been meaning to do so.. but like you the sun has distracted me from the fact its winter. LOL

chris.

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4794
  • Last login:April 10, 2022, 09:48:19 pm
Re: The ARK Project - Behold, the GOLD!
« Reply #295 on: December 13, 2010, 09:52:52 pm »
So much for those "top men", eh?  Those lazy asses haven't done anything in months!   ;D

I think it's finally time to get this back on track.  Unfortunately, I'm going to have to re-cut the long sides and buy an additional 80 square feet of laminate to replace what was ruined.

My biggest hurdle this week will be getting the shed cleaned out and organised so I can get to work.

Thanks for the interest, everyone!

Welcome back!

We've all set aside projects for months.  Just be proud you have a project cool enough that people feel the need to badger you into coming back.   :cheers:

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Lost? Not yet!
« Reply #296 on: December 14, 2010, 11:15:54 pm »
What happened to have it ruined?

I rolled it to take it home from the distributor.  This stuff can'r be rolled, even for a short time.  It has a "memory" and wanted to roll back up.  Made it impossible to laminate properly.

eds1275

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2157
  • Last login:Yesterday at 10:43:03 am
  • Rock and Roll!
Re: The ARK Project - Lost? Not yet!
« Reply #297 on: December 15, 2010, 12:07:45 am »
What happened to have it ruined?

I rolled it to take it home from the distributor.  This stuff can'r be rolled, even for a short time.  It has a "memory" and wanted to roll back up.  Made it impossible to laminate properly.

Ouch. Didn't they tell you not to do that? They should have. I wouldn't have known, but they sure as hell should have.

My fiance had never watched the indiana jones movies. We watched the first 3 over the last weekend. She has been taught.

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Lost? Not yet!
« Reply #298 on: December 15, 2010, 08:28:44 am »
My fiance had never watched the indiana jones movies. We watched the first 3 over the last weekend. She has been taught.

Don't you mean the first two?  You must, since there are only two in the series.  Raiders of the Lost Ark, and Indiana Jones and the Last Crusade.

eds1275

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2157
  • Last login:Yesterday at 10:43:03 am
  • Rock and Roll!
Re: The ARK Project - Lost? Not yet!
« Reply #299 on: December 15, 2010, 11:44:37 am »
I enjoyed temple of doom. Not as good as the other two, but enjoyable anyway. I hear that 4th one has aliens in it or some crap.

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Lost? Not yet!
« Reply #300 on: December 15, 2010, 01:35:32 pm »
I enjoyed temple of doom. Not as good as the other two, but enjoyable anyway. I hear that 4th one has aliens in it or some crap.

Temple of whatnow?  Alien what?  You're just talking crazy.

 ;)

Benevolance

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 602
  • Last login:August 10, 2019, 03:13:59 pm
Re: The ARK Project - Lost? Not yet!
« Reply #301 on: December 22, 2010, 07:27:20 pm »
Quote
I rolled it to take it home from the distributor.  This stuff can'r be rolled, even for a short time.  It has a "memory" and wanted to roll back up.  Made it impossible to laminate properly.

This is probably asking the obvious, but did you try rolling in the opposite direction to work out the natural desire to bend?

jtslade

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 746
  • Last login:January 11, 2023, 11:34:45 am
  • Keep it looking originallish!
Re: The ARK Project - Lost? Not yet!
« Reply #302 on: January 31, 2011, 10:39:56 pm »
 :) ;) :D ;D :( :o 8) ??? ::) :P :-[ :-\ :'( :laugh: >:D :angel: :angry: :applaud: :badmood: :banghead: :banghead: :cry: :blah: :notworthy: :censored: :dizzy: :cheers: :hissy: :laugh2: :soapbox: :tool: :timebomb: :dunno :afro: :burgerking: :embarassed: :lol

and @:o/

Ms. Pacman Original Cocktail with Non destructive mod to Groovy Arcade Linux with All 4way Vertical Cocktail capable 2 button or less games.


Neo Geo MVS Mame Cab Running Hyperspin, 25" Nanao Arcade Monitor, Mini-pac, ATI Radeon HD 4850 (ATOM-15), IL 8 Way Euro-Sticks from Paradise Arcade, Win XP 64bit, and tons of other junk.


Ground_Gainer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 30
  • Last login:April 20, 2013, 09:18:22 pm
Re: The ARK Project - Lost? Not yet!
« Reply #303 on: April 29, 2011, 04:40:14 pm »
Just read through this badboy and I must say, this is an awesome project!!!

Looking forward to seeing the rest.

Cheers  :cheers:

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Lost? Not yet!
« Reply #304 on: May 18, 2011, 12:14:19 am »
Ordered the replacement gold laminate today.  Should have it in hand sometime next week.  I'm planning on cutting new sides (long ones only) also.  Looks like this thing is finally getting back on track. 

Thanks for all the interest.   :cheers:

Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: The ARK Project - Lost? Not yet!
« Reply #305 on: May 18, 2011, 03:13:14 am »
yippee!!!! :applaud: :applaud: :applaud: :applaud:

Mr.Ian

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
  • Last login:August 21, 2013, 09:28:37 pm
Re: The ARK Project - Lost? Not yet!
« Reply #306 on: May 18, 2011, 07:40:34 am »
Feels like i have been waiting a lifetime for this to be complete

i cant wait to see this come together, im so glad that it all didnt end up on the scrap heap


One of my favorite projects on this forum.......................Bring it on

vivificus

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:May 20, 2011, 08:48:42 pm
Re: The ARK Project - Lost? Not yet!
« Reply #307 on: May 19, 2011, 10:09:59 pm »
I'm only new here but I'd love to see how things are coming along with your project! :applaud:

drventure

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4152
  • Last login:June 25, 2023, 02:23:57 pm
  • Laser Death Ray Bargain Bin! Make me an offer!
Re: The ARK Project - Lost? Not yet!
« Reply #308 on: May 19, 2011, 10:31:58 pm »
Those brass sticks have been an inspiration to me for a long time.

Glad to see this is back in action!

Tighe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 34
  • Last login:May 04, 2023, 10:19:57 pm
Re: The ARK Project - Lost? Not yet!
« Reply #309 on: June 14, 2011, 11:11:05 am »
I really want to see this done!  It is awesome!

Timstuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 648
  • Last login:April 16, 2014, 02:24:29 am
  • I feel asleep !!
Re: The ARK Project - Lost? Not yet!
« Reply #310 on: June 22, 2011, 11:30:31 pm »
Wow, I almost can't believe this project is still alive! I'm glad to hear it's still going, though! I cannot wait to see what this beast looks like when it is unveiled. :D

AlienInferno

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 515
  • Last login:March 12, 2024, 03:45:03 pm
Re: The ARK Project - Lost? Not yet!
« Reply #311 on: June 23, 2011, 02:26:20 am »
I just came across this.  Thanks for bumping it up.  Really great idea.  Love the artwork. 

syph007

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 598
  • Last login:June 24, 2014, 04:30:03 pm
  • With a router big enough, we can shape the world!
Re: The ARK Project - Lost? Not yet!
« Reply #312 on: June 23, 2011, 01:34:24 pm »
Was it special laminate or something?  Ive kept my home depot countertop laminate rolled for months and used it just fine.  It does stay curved, but the force of the contact cement is more then enough to hold it and keep it on and flat.

dfmaverick

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 343
  • Last login:July 03, 2016, 11:17:27 am
  • I want to build my own arcade controls!
Re: The ARK Project - Lost? Not yet!
« Reply #313 on: July 03, 2011, 11:48:50 am »
A couple companion pieces coming soon from acmearchivesdirect:

Ark of the Covenant Specplate



Power of the Ark

« Last Edit: July 03, 2011, 11:51:37 am by dfmaverick »

Neostalker

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 26
  • Last login:August 29, 2012, 01:51:08 pm
Re: The ARK Project - Lost? Not yet!
« Reply #314 on: March 08, 2012, 10:29:40 pm »
project dead? breath some life into it. :applaud:

muttieb

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:July 31, 2012, 04:34:53 pm
Re: The ARK Project - Lost? Not yet!
« Reply #315 on: April 16, 2012, 08:37:12 pm »
Did you ever make any progress on this cabinet. I have fallen in love with this idea and cant wait to see more!!!

jimfath

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 173
  • Last login:April 20, 2021, 02:58:31 am
  • IT consultant
Re: The ARK Project - Lost? Not yet!
« Reply #316 on: June 29, 2012, 03:53:50 am »
I have been selling people on the idea of building their own cabinet. When I try to explain that the cabinets can be whatever you want, I almost always bring up this project as an example. I hope it relaunches.

Maybe someone can make a terrible Crystal Skull themed cab to agitate the situation. It could be all "Labeouf'd" out.
@jimfath

swaffar

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 216
  • Last login:February 21, 2016, 03:34:15 pm
Re: The ARK Project - Lost? Not yet!
« Reply #317 on: June 29, 2012, 07:19:55 am »
I had completely given up on this project.  Hope to see it completed.
My projects:
 

dfmaverick

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 343
  • Last login:July 03, 2016, 11:17:27 am
  • I want to build my own arcade controls!
Re: The ARK Project - Lost? Not yet!
« Reply #318 on: June 29, 2012, 10:11:02 am »
I think we may need to wait for Indiana Jones to unearth this one in the next movie.

alfonzotan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 534
  • Last login:November 28, 2023, 08:39:45 am
    • The Cab With No Name
Re: The ARK Project - Lost? Not yet!
« Reply #319 on: June 29, 2012, 02:37:46 pm »
Maybe someone can make a terrible Crystal Skull themed cab to agitate the situation. It could be all "Labeouf'd" out.

That's not funny.

Okay, yeah it is...

NipRing

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 145
  • Last login:January 16, 2023, 11:40:05 pm
  • I love cats but i just cant eat a whole one myself
Re: The ARK Project - Lost? Not yet!
« Reply #320 on: January 13, 2013, 02:46:44 pm »
Watching this topic on and off for literally years. Life is busy, i know,  but this concept is too awesome to let slip by the wayside. I'll continue to wait.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7906
  • Last login:March 19, 2024, 06:19:27 pm
Re: The ARK Project - Lost? Not yet!
« Reply #321 on: January 13, 2013, 05:22:20 pm »
Watching this topic on and off for literally years. Life is busy, i know,  but this concept is too awesome to let slip by the wayside. I'll continue to wait.

yeah, he's cutting the LONG sides and they are really really long. I'd expect it might take another 18-24 months.

Yvan256

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1039
  • Last login:June 20, 2017, 08:35:41 am
    • Yvan256
Re: The ARK Project - Lost? Not yet!
« Reply #322 on: January 31, 2013, 11:22:33 am »
Any updates on this project?  :'(

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Lost? Not yet!
« Reply #323 on: March 22, 2013, 02:12:36 pm »
Watching this topic on and off for literally years. Life is busy, i know,  but this concept is too awesome to let slip by the wayside. I'll continue to wait.

yeah, he's cutting the LONG sides and they are really really long. I'd expect it might take another 18-24 months.

 :lol

That's a fair estimate.

Gamester

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 483
  • Last login:March 01, 2019, 03:00:10 pm
Re: The ARK Project - Lost? Not yet!
« Reply #324 on: March 22, 2013, 02:40:45 pm »
That's a fair estimate.

...and then he vanished back into the darkness...
Current Project:                                                       First Project:
  

Le Chuck

  • Saint, make a poll!
  • Wiki Contributor
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5509
  • Last login:March 26, 2024, 08:00:17 pm
  • <insert personal text here>
Re: The ARK Project - Lost? Not yet!
« Reply #325 on: March 22, 2013, 05:19:31 pm »
I heard he got it almost done and the spirit of the almighty occupied the build making it impossible to touch.  An eviction notice was drawn up but no agency will serve against an "act of God".  On the bright side Somunny's army is now impervious to defeat.  On the down side the build isn't likely to be finished until another ark of sufficient class and style is presented for the host of hosts to move into.   

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:September 05, 2018, 02:22:25 pm
  • Is it hot in here?
Re: The ARK Project - Lost? Not yet!
« Reply #326 on: March 22, 2013, 05:42:54 pm »
Not trying to be mysterious, but you know how life can be.

I hope to have more free time starting this summer than I've had during the past couple of years.  One of my top priorities is to get the ark project rolling again.  I can't believe it's been five years since I started it.  Wow, what a slacker I am!  All the materials are sitting in my shed just waiting to be rediscovered...


And LeChuck...  I don't think I've ever done anything in the spirit of the almighty.  :angel:

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2267
  • Last login:March 18, 2024, 11:41:19 pm
Re: The ARK Project - Lost? Not yet!
« Reply #327 on: March 22, 2013, 06:07:16 pm »
Not trying to be mysterious, but you know how life can be.

I hope to have more free time starting this summer than I've had during the past couple of years.  One of my top priorities is to get the ark project rolling again.  I can't believe it's been five years since I started it.  Wow, what a slacker I am!  All the materials are sitting in my shed just waiting to be rediscovered...


And LeChuck...  I don't think I've ever done anything in the spirit of the almighty.  :angel:

Heh, see I'm only 3rd slowest around here compared to you and PH.  Ahh just kidding and I do know how life can be.  This project inspired me when I was getting going on the Astro cab, and it still does.

Yvan256

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1039
  • Last login:June 20, 2017, 08:35:41 am
    • Yvan256
Re: The ARK Project - Lost? Not yet!
« Reply #328 on: March 22, 2013, 10:54:50 pm »
Heh, see I'm only 3rd slowest around here compared to you and PH.

My MVS-99-6 project was started around 3.5 years ago, what's my rank?  ;)

mgb

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3499
  • Last login:February 21, 2024, 06:18:13 pm
  • North East, US
The ARK Project - Lost? Not yet!
« Reply #329 on: March 22, 2013, 11:20:03 pm »
I'm glad to hear this project is still on. It was looking real good.
Life can be that way sometimes.

I know there are times when I'm full in and I frequent these forums everyday and them the next thing I know I'm so busy in other stuff that I'm out of here and the hobby for a few months

Sshado

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • Last login:January 04, 2024, 07:38:23 pm
  • Sshado's Club
    • Sshado's Club
Re: The ARK Project - Lost? Not yet!
« Reply #330 on: May 31, 2013, 10:53:00 am »
Memorial Day is over and it is Summer now, are you making more progress ???

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4794
  • Last login:April 10, 2022, 09:48:19 pm
Re: The ARK Project - Lost? Not yet!
« Reply #331 on: May 31, 2013, 11:56:34 am »
Glad to have you back somunny.  This is a great project.

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Lost? Not yet!
« Reply #332 on: June 01, 2013, 09:55:21 pm »
This was one of the original "original" ideas that inspired me in my project. It looks like 2013 is a year of returning projects! Happy to see you back, somunny!

Le Chuck

  • Saint, make a poll!
  • Wiki Contributor
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5509
  • Last login:March 26, 2024, 08:00:17 pm
  • <insert personal text here>
Re: The ARK Project - Lost? Not yet!
« Reply #333 on: June 01, 2013, 10:04:28 pm »
Popping back in twice on the same day months ago does not a return to work make  ;D

Here's hoping the bumps will get him back at it!

NipRing

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 145
  • Last login:January 16, 2023, 11:40:05 pm
  • I love cats but i just cant eat a whole one myself
Re: The ARK Project - Lost? Not yet!
« Reply #334 on: January 19, 2014, 08:14:37 pm »
Yearly check-in. I'm not seeing any progress pics   :p

This literally my second post in 12 months. I'm not letting this project go dammit!
« Last Edit: January 19, 2014, 08:16:15 pm by NipRing »

bfauska

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1372
  • Last login:December 28, 2023, 04:41:45 pm
  • "You're not wrong Walter, you're just an @##hole!"
Re: The ARK Project - Lost? Not yet!
« Reply #335 on: February 04, 2015, 11:20:01 pm »
Well look at that, it's been another year since the last post. At least I didn't miss much during my 6 year absence from the forum, this was one of the fun projects to follow back then and if it ever starts back up I can follow it again.

NipRing

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 145
  • Last login:January 16, 2023, 11:40:05 pm
  • I love cats but i just cant eat a whole one myself
Re: The ARK Project - Lost? Not yet!
« Reply #336 on: January 17, 2016, 08:12:40 pm »
Bi-yearly post.
Has the ark fallen into the nazi's hands????

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2787
  • Last login:May 09, 2023, 01:16:55 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: The ARK Project - Lost? Not yet!
« Reply #337 on: January 17, 2016, 08:58:07 pm »
Bi-yearly post. Has the ark fallen into the nazi's hands????

Not that it would have mattered. The Big Bang Theory has already proved that Indiana Jones involvement in the movie would have had absolutely no effect on the outcome.

eds1275

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2157
  • Last login:Yesterday at 10:43:03 am
  • Rock and Roll!
Re: The ARK Project - Lost? Not yet!
« Reply #338 on: January 18, 2016, 02:19:21 pm »
I think we should all just let it die. And then be happy if it comes back. Or someone else make it.

NipRing

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 145
  • Last login:January 16, 2023, 11:40:05 pm
  • I love cats but i just cant eat a whole one myself
Re: The ARK Project - Lost? Not yet!
« Reply #339 on: January 28, 2017, 09:57:43 pm »
One of these years...there'll be some progress

jimfath

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 173
  • Last login:April 20, 2021, 02:58:31 am
  • IT consultant
Re: The ARK Project - Lost? Not yet!
« Reply #340 on: December 19, 2017, 09:15:32 pm »
Yes, I'm bumping this

Perhaps he opened the ark...
@jimfath

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:Yesterday at 10:58:57 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: The ARK Project - Lost? Not yet!
« Reply #341 on: December 20, 2017, 08:25:04 am »
Too bad Photobucket ruined the pics
***Build what you dig, bro. Build what you dig.***

menace

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2564
  • Last login:September 18, 2023, 10:57:06 am
Re: The ARK Project - Lost? Not yet!
« Reply #342 on: September 14, 2018, 09:35:34 am »
I'm totally necro-bumping this thread--one to see if any more progress was made and 2 because I shamelessly stole all the artwork to build my own  ;D.  I'm going to go with a 2 player side by side setup since 90% of the games I play are horizontal 2 player games versus standard cocktail cabinet format.  I have a cocktail now and I find it really annoys me that its so nice vertically but terrible for horizontal games.

If Somunny sees this and wants to sell his progress (assuming he'd ship to canuckistan) then contact me!

Gauntlet *thrown*!

« Last Edit: September 14, 2018, 09:37:56 am by menace »
its better to not post and be thought a fool, then to whip out your keyboard and remove all doubt...

NipRing

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 145
  • Last login:January 16, 2023, 11:40:05 pm
  • I love cats but i just cant eat a whole one myself
Re: The ARK Project - Lost? Not yet!
« Reply #343 on: December 02, 2018, 08:54:18 pm »
I've been checking on this build thread for years....aaaaany time now he's gonna unveil it

NipRing

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 145
  • Last login:January 16, 2023, 11:40:05 pm
  • I love cats but i just cant eat a whole one myself
Re: The ARK Project - Lost? Not yet!
« Reply #344 on: January 05, 2020, 03:53:03 pm »
I hope this project hasn't fallen into the hands of Belloq and his nazi goons....

opt2not

  • Trade Count: (+15)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:February 15, 2024, 07:31:21 pm
Re: The ARK Project - Lost? Not yet!
« Reply #345 on: January 05, 2020, 04:09:18 pm »
Give it a rest. After yearly bumps, it’s a pretty good chance this project is dead. Take the hint.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:Yesterday at 10:58:57 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: The ARK Project - Lost? Not yet!
« Reply #346 on: January 05, 2020, 05:21:09 pm »
I heard a rumor it was damaged beyond repair.
***Build what you dig, bro. Build what you dig.***

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7906
  • Last login:March 19, 2024, 06:19:27 pm
Re: We have top men working on it right now...
« Reply #347 on: January 05, 2020, 07:18:49 pm »
I build computers...   ;D
Hehe...  I built four in 2007.  Two for myself and two for family members.

Cool...  I built my first one about 1.5 years ago.  I'll never buy another store-built system.   :cheers:

I wonder if Haruman still feels this way. I built most of my systems from the mid 90's - 200X, but I bought my last two. No real reason for me to build since I'm not building state of the art gaming rigs.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7906
  • Last login:March 19, 2024, 06:19:27 pm
Re: The ARK Project - Lost? Not yet!
« Reply #348 on: January 05, 2020, 07:21:06 pm »
I heard a rumor it was damaged beyond repair.

I heard that too. Maybe I heard it from you, you little rumor mill you.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:Yesterday at 10:58:57 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: The ARK Project - Lost? Not yet!
« Reply #349 on: January 05, 2020, 07:22:52 pm »
I heard a rumor it was damaged beyond repair.

I heard that too. Maybe I heard it from you, you little rumor mill you.

I could have sworn you told me that.
***Build what you dig, bro. Build what you dig.***

NipRing

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 145
  • Last login:January 16, 2023, 11:40:05 pm
  • I love cats but i just cant eat a whole one myself
Re: The ARK Project - Lost? Not yet!
« Reply #350 on: January 16, 2023, 11:40:34 pm »
"You call him Dr. Jones!!"