| Main > Main Forum |
| U360 questions |
| (1/1) |
| Breaker:
Hello all, Following 2 years of building, as of 1:00am this morning, I have the mock-up for my cab's control panel hooked-up and in testing. After a bit of tweaking I have most of the controls working as expected; except for two things: a) I have two U360s and while the first is working correctly, the second does not appear to be recognized - checked control panel and both sticks are present and working properly - stick IDs are set correctly - as #1 and #2 (UltraMap utility confirms sticks are working) Q - is there something I have to do to get the second U360 working? b) U360's don't seem to be able to control scrolling in Mamewah game list menu - I read something about this in other posts but I'm not sure if this is a shortcoming of the U360 or just a config issue Any assistance is most appreciated! Breaker. |
| AndyWarne:
If they are working in Control Panel, then the issue is likely to be a Mame configuration problem. Check in the controls menu (press Tab in a game). I am not actually sure if Mamewah supports gamepad joysticks for the menu control. Maybe someone can answer that. |
| Breaker:
Hi Andy, Bang-on! That's what I get for trouble-shooting at 1:00am :) I was trying to get the second joystick working in Robotron - I took another try at it this morning and found the right setting in the 'TAB' menu. I think I have a solution for the menu issue as well -> since I'm using my modified Wico's with the U360 interface I'm going to try hooking up the up/down leaf switches on the Wico for use on MameWah's menu. I don't think this will mess up any game control - it'll take some testing though. Cheers, Breaker. |
| Navigation |
| Message Index |