| Main > Main Forum |
| Homemade IIDX controller |
| << < (2/2) |
| MonMotha:
Well, those are exactly what's inside a KOC, so you can just reuse the board from that. You can reuse the disk, too, to save you some work. And yes, you could just wire those boards directly to the playstation control in a IIDX controller, though make sure the LED drive current is correct. |
| infamous360:
my KOC doesnt work at all anymore sadly and I was going to make an arcade sized turntable... |
| MonMotha:
What people do is attach the turntable from the KOC to the bottom of their arcade size turntable. It saves work. If your KOC doesn't work, then it's probably easiest to just buy a new one (told you they break). Like I said, you cannot just hook the outputs of the optics directly to a digital playstation controller. That won't do at all what you want. |
| infamous360:
I am stubborn lol so i am going to buy an ipac, optipac, and a console adapter and build my own.. My KOC only lasted 3 months and I plan on building a controller that will last a while without a lot of work... I had a USKOC and people told me that they have voltage problems... What kind of spinner is best to buy? I have experience will ultimarc and must say that they kick ass so I will probably order from them. Is it even possible to hook an optipac to an ipac? |
| Navigation |
| Message Index |
| Previous page |