Main > Main Forum

Like the E-Stick, but with ball shaped top?

Pages: << < (2/2)

ilGaspa:

Thanks :) I was wondering, maybe it's a stupid question, but: would be possible mounting a screw in type stick (like the Magstick) without "creting a recess" in the panel for it's square shaped base? I mean, removing my easy-mounting sticks and replace them with a pair of magsticks, inserted and screwed from under the control panel? In this order:


handle
floating disc
Panel hole with the stick going trough
Square shaped base

Instead of:
handle
floating disc
panel overlay
recess with square shaped base
panel hole with switches foing trough

Orclord:

It depends on the thickness of your panel. With a thick panel you would have to rout out the bottom to get a decent stick height above the panel.....

If you panel is thin enough to get a playable height then you would have to think about how much abuse you are going to give the stick, because of the length of screw used.....

You can just screw it into the bottom of your panel but as stated if you are a heavy handed player you stand the chance of ripping the screws out, that's why they are normally bolted all the way through.

Pages: << < (2/2)

Go to full version