Main > Buy/Sell/Trade - non-retail
WTB - A pacman control panel drilled for a 2 player 6 button style layout
(1/4) > >>
2PacMan:
I'm looking for a control panel that will fit a pacman machine that is drilled for a 2 player 6 button (street fighter style) layout.  Either one from a conversion, or if someone could drill up an old one like that for me.  Doesn't have to include any kind of graphics or sticks/buttons.  Thanks.
Kangum:
http://www.arcadeshop.com/parts.htm

sells blank midway upright control panels. you could maybe drill the holes yourself? its not expensive at 28 dollars.
2PacMan:
THat's an idea.  The pacman cp's have wood undernieth, not sure if it would fit the cab without the wood.  Can the holes be drilled without a press or anything?  I have nothing but a drill.  I can buy the bit, but how would you clamp the cp down...or can you just hold it?
SavannahLion:

--- Quote from: 2PacMan on January 31, 2008, 08:31:12 am --- I can buy the bit, but how would you clamp the cp down...or can you just hold it?

--- End quote ---

Never hold a piece with your hands while drilling. I know even I break that rule at times, but it's extremely dangerous. The drill bit can grab the piece, whip the piece around, and since it's metal, you risk damaging more than the piece you're drilling.

You should clamp it down. Sometimes I'll use a bit of soft cloth or pieces of wood so the clamp does mar whatever it is I'm drilling.
northerngames:
not sure if the thickness would be right but I could make one from mdf and laminate it with formica and you add your own artwork to it.
Navigation
Message Index
Next page

Go to full version