| Main > Main Forum |
| ran into a problem need some input |
| << < (7/7) |
| clickhea:
thanks :) i think as of right now iam going to keep the control panel level, which will give me a 1 inch angle. we shall see i guess |
| Neverending Project:
--- Quote from: clickhea on January 26, 2008, 10:38:28 am ---alright well heres a question normally how tall are the control box sides? 2 inches? 3 inches? how much clearance are required for the parts once they are installed? i'll see if i can go by this to make my decision --- End quote --- BTW, my CP box is 5", with a 3/4" panel on top. So the overall height is 5 3/4", and the inside of the box has 4 1/4", since the box bottom takes 3/4". This is the same size as the original CP box on the cabinet I am converting (pics here). Before you commit to building a box that may be too small, check out the dimensions of the parts you are installing. And remember, if your box has a bottom, this must be accounted for in the amount of space available. Here are some links: Ultimarc U360 (at the bottom) Happ Trackball A 3" tall box with a 3/4" bottom won't fit a Happ trackball. |
| clickhea:
appreciate your input, yeah i have not started building my panel yet, iam waiting to get my parts from dm still so i can lay everything out before i start making cuts. diddnt realize the trackblal required that much under room |
| Navigation |
| Message Index |
| Previous page |