Main > Main Forum

Which trackball mounting plate do I need

Pages: << < (3/3)

divemaster127:

The GGG is based on a betson trackball, per my Happ rep who has been doing this for 25 years, the Betson trackballs will fit the happ regular 3" mount.  Over 5 years of doing arcade work, I have sold dozens of the 3" mount for the betson trackballs & have never had a issue 1.  Unless Randy has changed something recently that I am unaware of the these work fine.  I am sorry you are having a issue with your mount as I stated yesterday return the order I will issue a full refund including your shipping
dm

Hoopz:

I would suggest just buying the longer screws.... It'll cost less than a dollar and since you already have the mounting plate, you won't have to wait around to order it again.

You can get the screws anywhere.  Certainly going to be the easiest solution here.  Just my two cents.

emerica:

I agree with HoopZ about going out and buying the screws needed. You can probably get them at home depot for a buck.

As for what Divemaster has said, I have the happ mount with a betson trackball and it fit just fine. This is assuming that the betson trackball is the same as the electric-ice.

u_rebelscum:


--- Quote from: emerica on January 16, 2008, 01:08:14 pm ---I have the happ mount with a betson trackball and it fit just fine. This is assuming that the betson trackball is the same as the electric-ice.

--- End quote ---

Same here. 

One note: The screws I got with the kit barely made it on betson and happs TBs.  Less than 1/8" of the screw actually engaged thread.  (I bought it years ago, but I can't see how the screws could be shortened without not working on happs TB, too.)

So I went and bought 1/4" longer screws for less than it would cost to ship the kit back (not that I even thought of shipping it back).  Don't need black screws; they can't be seen unless you're looking under the CP.  Just get the any screws with the same size and threading.

Pages: << < (3/3)

Go to full version